Home Theater Master MX-1000 Manuel utilisateur

Home Theater Master

LCD Touch Screen

Preprogrammed and Learning

Remote Control

MX-1000

Operating

Manual

The MX-1000 is a very powerful and flexible preprogrammed and

learning remote control with LCD touch screens.

It is designed to operate up to twelve home entertainment

components. You can program it for your components either from the

preprogrammed code library in the remote control or you can teach up

to 780 buttons into MX-1000 from your original remote controls.

The MX-1000 has many advanced operating features that can add

convenience and enjoyment of your home entertainment system. It

also allows you to change the button size and shape and edit the text

on the button in the LCD. You can also make these changes with the

aid of your personal computer.

Setting up the MX-1000 to work with your components is very easy

and simple. Please follow the instructions in the manual and retain the

manual for future reference.

For any questions or comments about the MX-1000, please contact

Universal Remote Control, Inc., 500 Mamaroneck Avenue, Harrison,

NY 10528 at 914-835-4484 or e-mail to [email protected]

Customer service hours are 9:00 AM to 6:00 PM EST, Monday Ð

Friday.

1. Introductions - General

1. Introduction

2. Battery Installation

3. Summary of Operations

A. Description of Devices

B. Pre-programed codes

C. Learning

D. Macro Operation

E. Punch Through

F. Editing the buttons on LCD screen

G. Loading program

H. All Other Operations

4. LCD Screen and Button Layout

5. Getting Ready with System Setting

6. Programming the Remote Control

A. Preprogramming Method

1) Using a three-digit code number

2) Auto scan with brand names

B. Learning method

C. To erase the learned buttons

1) To erase a single button

2) To erase all the learned commands in a single device

3) To erase all the learned commands in all twelve device

7. System and Operations Set Up

A. Setting up the system

B. Macro and Punch Through Programming

B-1. Macro programming

B-2. To program Macro Functions

B-3. To erase Macro Functions

C. To program Punch Through Functions

C-1. Programming

C-2. To Erase Punch Through Functions

8. To Edit the Buttons on LCD

A. To Move buttons

B. To Copy buttons

B-1. To Copy- Creating a Favorite Device page(MAIN1)

C. To Delete buttons

D. To Insert buttons

E. To Change buttons

F. To Edit a text

9. Clock Setting

10. Loading Programs with PC

11. LCD Screen Alignment

12. LCD Screen Contrast

13. Caution on LCD Screen

14. Memory Lock

15. Erasing all the Programs

16. Warranty

17. Specifications

18. Appendix

A. Set up Function Table

B. Set up code Table

Table of Content

30 ~ 39

40 ~ 53

A. Description of Devices:

The MX-1000 is designed to operate up to twelve components. They

are Audio, CATV, Satellite, TV, DVD, VCR1, VCR2, Laser Disc,

Tuner, CD, Tape and AUX. However, the device button name can

be changed to meet your exact needs. You can also create a favorite

device page and transfer the frequently used devices to the favorite

device page in order to change the device button sizes and shapes.

Once you create the favorite device page, it will appear as a default

device page. Please refer to COPY in EDITING Section on page 21

for details.

There are also four pages of the LCD screen for each device and you

can use them to create, delete or edit any functional buttons to

customize with your audio/video components. Please refer to

EDITING on page 20 for details.

B. Pre-programmed Codes:

The MX-1000 comes with preprogrammed codes for practically all

the major audio and video equipment that are on the market. You can

operate all of your components with the MX-1000 simply by

punching in the three-digit code number that is assigned to your

brand. The code numbers for various brands and components are

listed in the instruction manual. Please refer to the programming

instruction shown on page 9 for details.

C. Learning:

The MX-1000 can also learn practically all the codes from your

original remote controls. There are 50 LCD screens in the remote

control and all the functional buttons in the LCD can be taught. In

addition, there are eleven rubber buttons and a joystick that contains

five functions. Each of these buttons and the joystick functions can be

taught in each of the twelve devices. As a whole, you can teach up to

780 new functions into the remote control. Please refer to page 12 in

the instruction manual for details.

3. Summary of Operations

MX-1000 uses four AA batteries. Please be sure to match the

batteries with the (+) and (-) markings inside the battery compartment

during installation.

The remote control goes through self-testing for three seconds after

the batteries are installed and automatically moves to setting mode for

your programming.

NOTE: Please do not mix old batteries with new ones or mix different

types of batteries.

2. Battery Installation

F. Editing the buttons on LCD screen.

You can change the size and shape of the buttons on the LCD screen.

You can also create, delete, copy and move the buttons from one

location to another on the LCD. In addition, you can erase and write

your own text with different font sizes on the buttons. This could be

done directly on the remote control without a personal computer or

with the aid of personal computer. Please refer to page 20 in the

manual for details.

G. Loading Program

The MX-1000 is capable of receiving software programs and data

through the Internet. You can also load programs and data in the

remote control to your personal computer and download them to

another MX-1000. Please refer to page 26 in the manual for details.

H. All other operations:

You can set the duration of the back light or the LCD display to stay

on as well as low battery warning level and the "beep" sound level.

Please refer to page 16 in the manual for details.

You can also set the time, date and year that are displayed in the

remote control by following the procedures shown on page 26 of the

manual.

3. Summary of Operations

D. Macro Operation:

The remote control is capable of sending out a series of commands

with one button press. There are three types of macro buttons you can

use for such macro operations and they are as follows:

1. M1, M2 and M3 buttons on MAIN page.

Each of these three buttons are designed to send out up to 28 series of

commands you programmed into the buttons. It is typically used to

turn on and turn off all of your A/V components with one button

press.

2. Device buttons on Main page.

There are twelve device buttons on the MAIN page and each of these

device buttons can send out up to 14 commands you programmed into

the device button. It is typically used in sending out audio input codes

so that the audio receiver will make an automatic input switch when

you press the respective device button in the remote control.

3. Favorite Channel buttons.

You can create up to 60 favorite channel buttons in the remote control

by programming the most often watched channel numbers into these

buttons. Each of these buttons can send out up to 14 commands. You

can also use them for any other purpose. Please refer to page 16 of the

manual for programming the macro operations.

E. Punch Through.

This is designed to operate audio equipment volume control buttons

( VOLUME UP and DOWN and MUTE ) while all the other buttons

control video equipment. You can also operate transport functions

( PLAY, STOP, REWIND and FAST FORWARD buttons ) from

VCR, DVD, LD, CD or any other mode to operate while all other

buttons in the remote control are operating different components.

You can also make punch through on CHANNEL buttons. Please

refer to page 19 in the manual for details.

3. Summary of Operations

All the programming is done by first entering the SYSTEM

SETTING mode in the remote control. Press both the MAIN and

PAGE buttons simultaneously for five seconds to enter the SYSTEM

SETTING mode.

Move the cursor on the screen with the joystick to your selection in

the list. Enter the selection by pushing down the joystick.

You can exit the setting mode by simply pressing the MAIN button or

bring the cursor to 8. TO EXIT with joystick and push the joystick

down

5. Getting Ready with System Setting

4. LCD Screen and Button Layout

Displays the name of the device selected.

Displays the data and clock

Displays page number.

Displays the device names

LIGHT button

MACRO buttons.

MAIN DEVICE menu button.

LCD Page change button.

POWER

MUTE

VOLUME

CHANNEL

Previous channel button.

TRANSPORT functions(PLAY, STOP,REWIND and FF) for VCR,

CD and DVD etc.

JOYSTICK button(UP, DOWN, LEFT,RIGHT and ENTER)to move

the cursor and enter the selection by pushing down the joystick.,

8. Confirm that you entered the right code number that matches your

component by pressing other buttons such as POWER, VOLUME,

MUTE and CHANNEL. If any of the buttons do not operate as they

should, please repeat from Step 5.

9. Continue to program other components by repeating from the

above step 5.

10. Once you completed programming all the devices, exit from the

programming mode by pressing both the MAIN and PAGE

buttons simultaneously.

11. You will be in the setting mode once again. Move the cursor to

8. TO EXIT and press the cursor down or simply press the MAIN

button to exit to main menu.

2) Auto Scan with brand names.

You can also program your remote control by brand name with the

following steps:

1. Manually turn on the component you plan to operate.

2. Go to program setting mode in the remote control by pressing both

the MAIN and PAGE buttons simultaneously for five seconds.

3. Using the joystick, move the cursor down in the LCD screen to

3. PREPROGRAM.

4. Push the joystick down to enter the preprogram mode.

5. Select the device you wish to program in the LCD screen.

(E.g. To program TV, press the TV device button. )

6. Select the device from which the three digit code number will be

selected from. (E.g. If it is from the TV code table, press the TV device

button.)

6. Programming the Remote Control

You can program the MX-1000 to make it compatible with all of your

components by following either the preprogramming method or

teaching it with your original remote controls.

A. Preprogramming Method:

1) Using a three-digit code number.

1. Turn on the component you plan to operate manually.

2. Go to the program setting mode by pressing both the MAIN and

PAGE buttons simultaneously for five seconds

3. Using the joystick, move the cursor down in the LCD screen to

3. PREPROGRAM.

4. Push the joystick down to enter the preprogramming mode.

5. Select the device on the LCD screen that you wish to program.

(E.g. To program TV, press the TV device button. )

6. Select the device from which the three digit code number table will

be selected from. (E.g. If it is from the TV code table, press the TV

device button.)

7. Point the remote control toward the component and enter the three-

digit code number you selected for your component from the code

table on page 40 Ð 53. ( Please enter the code number within 20

seconds of programming.) If there is more than one code number

assigned to your brand, try the one code number at a time until you

find the right code number. ( If you entered the right code number,

the component will turn off right after you entered the number.)

When the right code number is entered, save the code by pressing

the SAVE button on LCD.

6. Programming the Remote Control

NOTE: Confirm that it is the right code number for your

component by pressing other buttons such as POWER,

VOLUME, MUTE and CHANNEL, etc. If any of the buttons

do not operate as they should, please repeat from Step 5.

10. Continue to program other components by repeating from Step 5.

11. Once you have completed programming all the devices, exit from

the programming mode by pressing both the MAIN and PAGE

buttons simultaneously.

12. You will be in the setting mode. Move the cursor to 8. TO EXIT

and press the cursor down or simply press the MAIN button to exit

to the main menu.

B. Learning Method:

You can also teach any of the buttons in the remote control except

the MAIN and PAGE buttons with the following steps.

1. Go to the program setting mode by pressing both the MAIN and

PAGE buttons simultaneously for five seconds.

2. Move the cursor to 4. LEARNING with the joystick and then push

the joystick down to enter the learning mode.

3. If you wish to teach any of the functional buttons in the device,

keep the cursor to COMMON BUTTON and select the device that

you wish to enter. If you wish to teach the twelve device buttons

shown on the LCD, press the MUTE button to move the cursor to

the DEVICE BUTTON and select the device on the LCD that you

wish to teach into.

7. Point the remote control to the component and press the BRAND button.

8. Press the number button on LCD screen that corresponds with the

first alphabetical character of your brand name. ( Please press the

number button within 20 seconds of programming.)

Plcase note that pressing the number button will only show the first

alphabet of the brand in that alphabet group.

9. If the first code number assigned to the brand is the right one, it

will turn off the component. If it is not the right one or if it is not the

right brand name, press the Channel Up button. It will automatically

send out a POWER OFF command either from the next code

number from the same brand or the code from the next brand. Keep

the Channel Up button pressed until it turns off the component.

When the component turns off, save the code by pressing the SAVE

button on the LCD. ( Note: It is quite possible that the code number

that works with your component may have a different brand name

because of the way it was made by its manufacturer. )

6. Programming the Remote Control

C. To Erase the Learned Buttons

1) To erase a single button:

1. Go to the program setting mode by pressing both the MAIN and

PAGE buttons simultaneously for five seconds.

2. Move the cursor to 4. Learning with the joystick and then push the

joystick down to enter the learning mode.

3. Move the cursor to COMMON BUTTON and select the device

that contains the functional button you wish to erase. If you wish to

erase the function in the device button, move the cursor to DEVICE

BUTTON.

4. Press the functional button or device button you wish to erase for

three seconds or more and it will flash "ERASED". Repeat this step

for other buttons you wish to erase.

5. Once you completed erasing and wish to exit from this mode,

press the MAIN button to go back to the main page of the learning

mode. Exit from the Main page by pressing both the MAIN and

PAGE buttons simultaneously.

6. You will be in the setting mode once again. Move the cursor to

8. TO EXIT and press down the cursor or simply press the MAIN

button to exit to the main menu.

2) To erase all the learned commands in a single device:

1. Go to the program setting mode by pressing both the MAIN and

PAGE buttons simultaneously for five seconds.

2. Move the cursor to 4. Learning with the joystick and then push the

joystick down to enter the learning mode.

6. Programming the Remote Control

4. Place your original remote control to the MX-1000 head to head

about 2-3 inches apart as shown below.

5. Press either the device button or functional button, whichever you

wish to teach in the MX-1000. It is now ready to learn on the button

you selected.

6. Press the button on your original remote control that you wish to

teach into the MX-1000. The MX-1000 will "beep" indicating that

it received the signal and the LCD will show "RETRY".

( Please enter the code signal within 20 seconds of programming.)

7. Press the same button on the original remote control a second time

to ensure correct learning. The MX-1000 will beep a second time

with "GOOD" flashed on the LCD screen, indicating that it learned

the code correctly. If it flashes "FAIL", repeat from Step 5 until it

learns successfully.

8. Move on to the next button (or device) you wish to teach by

repeating from Step 5. If you are teaching functional buttons, you

can also move on to teach the buttons in the next page by pressing

the PAGE button.

9. Once you complete the teaching and wish to exit from the leaning

mode, press the MAIN button to go back to the main page of the

learning mode. Exit from the Main page by pressing both the MAIN

and PAGE buttons simultaneously.

10. You will be in the setting mode once again. Move the cursor to

8. TO EXIT and press down the cursor or simply press the MAIN

button to exit to the main menu.

6. Programming the Remote Control

Go to the program setting mode by pressing both the MAIN and

PAGE buttons simultaneously for five seconds. Move the cursor on

the LCD screen to 2. SYSTEM & OPTIONS with the joystick. Enter

this mode by pushing the joystick down and the following can be

programmed:

A. Setting Up the System.

The LCD screen will list the following choices.

Range Default

Buzzer Status: High, Low, Off High

Back Light On Time: 0 Ð 120 seconds 20 seconds

LCD on Time: 5 - 120 seconds 30 seconds

Warning of Low Battery: 10% - 50% level 10 %

Select the button you wish to change from the list first. Press the UP

or DOWN buttons on the LCD to set them up. Once you set them up,

press the SAVE button to store them.

You will be in the setting mode once again. To return to the main

menu, move the cursor to 8. TO EXIT and press the cursor down or

simply press the MAIN button to exit to main menu.

B. Macro and Punch Through Programming

The MACRO and PUNCH THROUGH can be also programmed in

this mode. Press the button you wish to program and follow

procedures shown below:

7. System and Operations Set Up

3. Press the MUTE button to move the cursor to the DEVICE

BUTTON and keep the device button you wish to erase all the

learned commands down for five seconds until the LCD shows

ERASED. This will erase the function taught in the device button.

If you continue to press the device button for another five seconds,

it will erase all the functions in the device.

4. Once you complete the erasing and wish to exit from this mode,

press the MAIN button to go back to the main page of the learning

mode. Exit from the Main page by pressing the MAIN and PAGE

buttons simultaneously.

5. You will be in the setting mode once again. Move the cursor to

8. TO EXIT and press down the cursor or simply press the MAIN

button to exit to the main menu.

3) To erase all the learned commands in all twelve devices:

1. Go to the program setting mode by pressing both the MAIN and

PAGE buttons simultaneously for five seconds.

2. Move the cursor to 4. LEARNING with the joystick and then push

the joystick down to enter the learning mode.

3. Press both the POWER and STOP buttons simultaneously for five

seconds in the learning mode. The LCD will show ERASED after

it erased all the learned commands in the remote control.

4. Once you complete the erasing and wish to exit from this mode,

press both the MAIN and PAGE buttons simultaneously.

5. You will be in the setting mode once again. Move the cursor to

8. TO EXIT and press down the cursor or simply press the MAIN

button to exit to the main menu.

NOTE:

Preprogrammed code will be automatically restored when learned

function is crased.

6. Programming the Remote Control

2) For Device Buttons:

1. Press one of the twelve device buttons you wish to store macro

functions with the cursor on DEVICE BUTTON.

2. Move the cursor to COMMON BUTTON and select again either

the same or another device button whose functional buttons you

wish to store in the device macro button you selected first. You

can store up to 14 commands into the device macro buttons.

3. Store the commands you selected to the macro button by pressing

CH (UP) button. To cancel the macro commands, press CH ( DOWN ).

3) For Favorite Channel Button:

1. Press the device you wish to program favorite channels with cursor

on COMMON BUTTON.

2. Press one of the favorite channel buttons and enter the channel

number you wish to store in the

FAVORITE channel button. You can store up to 14 commands.

3. Store the commands you selected in the Favorite channel button by

pressing Channel UP button. To cancel the macro commands, press

CH ( DOWN ).

Once you complete the macro programming and wish to exit, press

both the MAIN and PAGE buttons simultaneously. This will take you

to the setting mode. Move the cursor to 8. TO EXIT in setting mode

and press the cursor down to exit or simply press the MAIN button to

exit to main menu.

NOTE:

Pressing the Volume Up button during the macro programming will

add a time delay of 0.5 seconds between the commands. E.g. Pressing

the Volume Up button twice will cause a pause of 1 second between

the commands where the delay was inserted.

B-3. To Erase Macro Functions.

To erase the functions you stored in any of the macro buttons, press

the Channel UP button without entering any commands during the

macro programming mode.

7. System and Operations Set Up

B-1. Macro Programming:

There are three type of macro functions you can program. They are as

follows:

1. M1, M2 and M3 in the Main menu:

Designed to send out up to twenty eight commands from each of the

three buttons.

2. Twelve device buttons in the Main menu:

Send out up to fourteen commands from each device button.

3. Favorite Channel Buttons:

You can create and design up to 60 buttons as your Favorite Button in

video modes. Each favorite channel button can send out up to

fourteen commands with one button press.

B-2. To Program Macro Functions:

Press MACRO PROGRAM button in 2. SYSTEM & OPTIONS

Move the cursor on the LCD either to the COMMON BUTTON to

program M1 Ð M3 and favorite channel buttons or to the DEVICE

BUTTON to program the device buttons by using MUTE button.

1) For M1 Ð M3 Button:

1. Press one of the three macro buttons, M1 Ð M3, with the cursor

on DEVICE BUTTON.

2. Select functional buttons you wish to store in the macro button.

You can store up to 28 commands.

3. Store the commands you selected to the macro button by pressing

CH (UP) button. To cancel the macro commands, press CH ( DOWN ).

7. System and Operations Set Up

Autres manuels pour MX-1000

Table des matières

Autres manuels Home Theater Master Télécommande

Home Theater Master

Home Theater Master MRf-250C Manuel utilisateur

Home Theater Master

Home Theater Master MX-500 Manuel utilisateur

Home Theater Master

Home Theater Master MX-800 Manuel utilisateur

Home Theater Master

Home Theater Master MRF-250 Manuel utilisateur

Home Theater Master

Home Theater Master MX-500 Manuel utilisateur

Home Theater Master

Home Theater Master SL-8000 Manuel utilisateur

Home Theater Master

Home Theater Master MX-200 Manuel utilisateur

Home Theater Master

Home Theater Master MX-500 Manuel utilisateur

Home Theater Master

Home Theater Master MX-1000 Manuel utilisateur

Home Theater Master

Home Theater Master MX-500 Manuel utilisateur

Home Theater Master

Home Theater Master MX-700 Manuel utilisateur

Home Theater Master

Home Theater Master MX-3000 Manuel utilisateur

Home Theater Master

Home Theater Master MRF-200 Manuel utilisateur

Home Theater Master

Home Theater Master MX-600 Manuel utilisateur

Home Theater Master

Home Theater Master MX700TM Manuel utilisateur

Home Theater Master

Home Theater Master MRF-250 Manuel utilisateur

Home Theater Master

Home Theater Master MX-1000 Manuel utilisateur

Manuels Télécommande populaires d'autres marques

Panasonic

Panasonic EUR7622KB0 Manuel utilisateur

Bang & Olufsen

Bang & Olufsen Beo4 Manuel utilisateur

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Manuel utilisateur

Multiplex

Multiplex PROFI TX 9 Manuel utilisateur

One Remote

One Remote RMB4 Manuel utilisateur

FUTABA

FUTABA 9ZAP - PART2 Manuel utilisateur

HR Matic

HR Matic HR MULTI 3 Manuel utilisateur

Yamaha

Yamaha ACC-GNRST-30-20 Manuel utilisateur

EisSound

EisSound KBSOUND Manuel utilisateur

Marantz

Marantz RC101 Manuel utilisateur

Conrad

Conrad FS20 TC6 Manuel utilisateur

Anritsu

Anritsu MP1777A Manuel utilisateur

Niles

Niles WVC100 Guide de dépannage

RCA

RCA RCU1300 Manuel utilisateur

Bang & Olufsen

Bang & Olufsen BEO6 Manuel utilisateur

GE 94901 Manuel utilisateur

Onbon

Onbon YQ1-75 Manuel utilisateur

FUTABA

FUTABA R7108SB Instructions d'installation