Hollyland MARS T1000 Guide d'installation

MARS T1000

FAQ

V2.1, 08/25/2020

◆TWO SETS CONNECTION

1. How to connect two sets of MARS T1000 systems?

A: If two base stations are close enough, one may use a customized RJ45 cable to connect them. If one

tends to extend the transmission range of the two sets of MARS T1000, connect two base stations via a long

RJ45/Ethernet cable plus a cable converter to extend the range for another 100 meters.

◆TWO SETS CONNECTION

2. How to cusomize the RJ45 connection cable?

A: The customized RJ45 cable requires specific definition of pin order and color as shown below. One side

is the common T568B, while the other side requires the specific pin order and color.

◆TWO SETS CONNECTION

3. Where to get the accessories for MARS T1000 ?

A: Reach out to our local dealers via WHERE TO BUY, or directly connect to us via CONTACT US on

Hollyland Official Website or via email: sales@hollyland-tech.com.

◆PAIRING & ID SELECTION

1. How to change the ID for a beltpack?

•Go to the menu on the base station by long-pressing the middle button

•Select “System” -“ Reset”

•Choose a new ID for the beltpack.

Note: after resetting, all beltpacks will need to be re-paired with the base station.

◆PAIRING & ID SELECTION

1. How to pair a beltpack with the base station?

•Connect the beltpack to the station via the USB interface

•Long-press the middle button on the beltpack

•Choose “Pair” and select an ID for the beltpack

◆NOISE

1. Why there are noises in the headsets for both the beltpack and the base station? How to

solve it?

A: It is because the headset is not plugged in correctly. Plug the headset in again.

2. How to decrease the noise under a quiet environment?

A: Go to the menu of the base station or the beltpack by long-pressing the middle button. Select the

“Quiet” mode under “Application”.

◆VOLUME

1. What settings should I change under a noisy environment?

A: Go to the menu of the base station or the beltpack by long-pressing the middle button. Select the

“Noisy” mode under “Application”.

2. How to increase the volume of the microphone?

A: Go to the menu of the base station or the beltpack by long-pressing the middle button. Select “Mic

Gain” under “Mic Options”.

◆VOLUME

3. Why the volume of the headset is still low after increasing the mic gain and adjusting the

application?

A: The standard headset is the directional dynamic mic to avoid the noise going into the mic. Make

following changes:

•Put blue dot towards the mouse

•Keep the distance between the mouse and the mic within 5cm

◆VOLUME

4. Why beltpck could not be heard by other beltpacks?

•Check if the beltpack’s OLCD shows MUTE. The beltpack is on MUTE status by default after powering

on. Long-press the side button of the beltpack to TALK status.

•Check if the headset is plugged well.

•Check if the type of the mic is correctly selected. Select Dynamic for the standard mic, and select

Electret for mobile headphones or other headsets.

Autres manuels pour MARS T1000

Autres manuels Hollyland Système d'interphone

Hollyland

Hollyland Solidcom C1 Pro Manuel utilisateur

Hollyland

Hollyland MARS T1000 Manuel utilisateur

Hollyland

Hollyland SOLIDCOM C1 Manuel utilisateur

Hollyland

Hollyland 0108B Manuel utilisateur

Hollyland

Hollyland Solidcom C1 HUB8S Manuel utilisateur

Hollyland

Hollyland SOLIDCOM C1 Manuel utilisateur

Hollyland

Hollyland Solidcom C1 Pro Manuel utilisateur

Hollyland

Hollyland HOLLYVIEW LARK 150 Guide de démarrage rapide

Hollyland

Hollyland Solidcom C1 Pro Manuel utilisateur

Hollyland

Hollyland Solidcom C1 Pro Manuel utilisateur

Hollyland

Hollyland MARS T1000 Manuel utilisateur

Hollyland

Hollyland SOLIDCOM M1 Manuel utilisateur

Hollyland

Hollyland MARS T1000 Guide de démarrage rapide

Manuels Système d'interphone populaires d'autres marques

Bticino

Bticino LINEA 3000 Manuel utilisateur

MSI

MSI MSI-140 Manuel utilisateur

golmar

golmar Stadio Plus Manuel utilisateur

CyberData

CyberData 011211 series Manuel

Vidos

Vidos duo M1021 Manuel utilisateur

Vimar

Vimar ELVOX 7539/E Manuel utilisateur

SSS Siedle

SSS Siedle BTSV 850-03 Manuel utilisateur

Dahua

Dahua VTO Series Manuel utilisateur

Elvox

Elvox 5651 Manuel utilisateur

Videx

Videx VIDEOKIT Series Manuel utilisateur

Rocom

Rocom Doortello Business FW T2.05W2.04 Manuel utilisateur

Viking

Viking E-35-EWP Manuel utilisateur

Safeguard Supply

Safeguard Supply LRA-EX1000 Manuel utilisateur

SSS Siedle

SSS Siedle BFCV 850 Series Manuel utilisateur

GRD

GRD MAX V2 Manuel utilisateur

Alecto

Alecto ADI-250 Manuel utilisateur

Aiphone

Aiphone IE-8MD Manuel utilisateur

Perel

Perel EDB4 Manuel utilisateur