HoldPeak 5040B Manuel utilisateur
Warning:
1. Before using this product, please read the safety precautions and
instructions carefully. Failure to follow the instructions mentioned in the user
manual may cause damages to this instrument, affect the measurement
accuracy or even physically harm the user or anyone else.
2. Do not try to disassemble or repair the instrument by yourself, especially
the laser transmitter part which is highly sensitive. Take a good care of your
instrument and don’t place it anywhere within the children’s reach. This
instrument is preferred to be used by professionals only.
3. Never point the laser beam at yourself or someone else, especially in the
eye. Of course, don’t stare at the laser beam either
4. Don’t point this laser device at highly-reflective object.
5. The electromagnetic radiation from this laser device may interfere with
other instrument nearby such as a pacemaker and hearing aid.
6. Don’t use this laser device in an inflammable and explosive environment.
7. Dispose the broken instrument and used batteries properly and discreetly.
Don’t mix them up with other normal household garbage. Follow the related
government regulations during disposal.
Thank you for purchasing our handheld laser distance meter.
Please carefully read this user manual and follow the instructions below.
Handheld Laser Distance Meter
5040B,5060B,5080B,5100B
User Manual
5. Backlight/Point of Reference Switch Button
6. Pythagorean Proposition Indirect Measurement Button
7. Unit Switch Button
8. Record-view Button
9. Clear/Power Off Button
Screen:
Laser beam indicator
Point of Reference indicator
3. Area/Volume Calculation indicator
4. Pythagorean Proposition Indirect Measurement indicator
5. Battery indicator
6. Record-view indicator
7. Signal Strength indicator
8. Unit indicator
9. Max. Measurement indicator
10. Min. Measurement indicator
11. Distance Measurement indicator
1.
2.
Overview:
Keyboard:
1. Power On/Single Measurement/Consecutive Measurements Button
2. Add Button
3. Subtraction Button
4. Area/Volume Calculation Button
12. Primary Display Area
13. Supplementary Display Area
OD Outdoor Mode:
After the device is turned on, long press the Area/Volume Calculation Button
for 3 seconds to temporarily activate or deactivate OD Outdoor Mode. It
returns to default setting after the device is turned off.
Inserting/Replacing Batteries
Open the battery compartment and insert the batteries in it and then shut the
compartment with the lid.
When battery is low，a battery indicator icon will be displayed on the screen to
remind you to replace the batteries.
·Pay attention to the polarity symbols marked inside of the compartment.
· Only 1.5V AAA alkaline battery is allowed.
·Remove the batteries if you are not going to use the instrument in a long
time(to avoid leak of erosive chemical substance from the batteries).
Start，Menu
Turn on/ Turn off Instrument
Turn on: Press the ON/MEAS Button to turn on the device.
Turn off：Long press the Clear Off Button to turn off the device.
Clear Off Button
Press the “Clear Off” Button to delete the latest measurement. For
indirect measurement,（such as Area/Volume measurement）, you can
delete the measurements one by one and measure them again.
Screen Illumination
Long press the Unit Button to turn on the backlight of the screen.
Long press it again to turn it off. The backlight automatically goes off too if
no button is pressed within 60 seconds. After the device is turned off(or
auto power-off), the backlight goes off too.
Unit Switch:
Press the Unit Button to switch between different units: m ; in ; ft
0.000m 0.000m2 0.000m3
0.00m 0.000m2 0.000m3
0.00ft 0.00ft2 0.00ft3
0.0in 0.00ft 0.00ft3
Point of reference setting
The default point of reference of this meter is its bottom. Press the Point of
Reference Button to switch the point of reference between its bottom
and head.
Distance measurement，Add/Subtract，Area，Volume，Pythagorean proposition
indirect measurement
Single Measurement
Press the“Power on/Measure”Button to activate the laser beam.
Point the meter at the target and then Press this button again, the
measuring result will appear on the primary display area of the screen.
Max/Min Measurement（Consecutive Automatic Measurements）
Under standby mode(right after the device is turned on)，long press the “Power
on/Measure” button and enter the Automatic Consecutive
Measurements mode. The meter automatically starts taking measurements
constantly under this mode and the Max/Min measurements will be displayed
on the top of the screen. The latest single measurement will appear in the
to stop primary display area. Press the “Clear/Power Off” Button
automatic consecutive measurement.
Add/Subtract Functions：
After single measurements，you can add/subtract 2 measurements
First, take a measurement, then press the “Add” Button ，a symbol“+”
will appear in the primary display area which means the instrument has
entered the Accumulation Mode. Take another measurement, then the
summation of the last 2 measurements will be displayed on the screen.
First, take a measurement, then press the “Subtract” Button ，a symbol
“-” will appear in the primary display area which means the instrument has
entered the Subtraction Mode. Take another measurement, then the difference
of the last 2 measurements will be displayed on the screen.
Area Measurement
Press the “Area/Volume” button once, a symbol will appear
on the screen which stands for Area, while one side of it keeps blinking.
Follow the instructions below：
Press the “Power on/Measure” button to measure the blinking side
Press the “Power on/Measure” button again to measure the second
blinking side
(Width)
The meter will automatically work out the area based on these 2
measurements and display it on the primary display area.
Press the “Power on/Measure” button to delete the latest
measurement so you can take measurements again.
(Length)
Volume Measurement
Press the “Area/Volume” button twice, a symbol will appear on
the screen which stands for volume, while one side of it keeps blinking.
Follow the instructions below：
Press the “Power on/Measure” button to measure the 1st blinking
side（Length）
Press the “Power on/Measure” button again to measure the 2nd
blinking side（Width）
Press the “Power on/Measure” button again to measure the 3rd
blinking side（Height）
The meter will automatically work out the volume based on these 3
measurements and display it on the primary display area.
Press the “Power on/Measure” button to delete the latest
measurement so you can take measurements again.
Pythagorean Proposition Indirect Measurement
This meter is capable of calculating the distances based on Pythagorean
Proposition. This function is designed for some special locations which are
inaccessible to the user. There are 3 measurement modes and you can press
this button to switch between them：
once，a symbol will appear on the screen 1》Press this button
with its hypotenuse blinking.
Press the “Power on/Measure” button to measure the hypotenuse
（a）.
Press the “Power on/Measure” button again to measure the blinking
straight flange（b）.
The meter will automatically work out the height of the 2nd straight flange
（x）.
2》Press this button twice，a symbol will appear on the screen
with the upper hypotenuse blinking.
to measure this blinking Press the “Power on/Measure” button
hypotenuse（a）.
again to measure the blinking Press the “Power on/Measure” button
straight flange in the middle（b）.
Press the “Power on/Measure” button again to measure the lower
blinking hypotenuse（c）.
The meter will automatically work out the height of the straight flange（x）.
3》Press this button three times，a symbol will appear on the
screen with its hypotenuse blinking.
Press the “Power on/Measure” button to measure this blinking
hypotenuse（a）.
Press the “Power on/Measure” button again to measure the 2nd
blinking hypotenuse in the middle（b）.
Press the “Power on/Measure” button again to measure the 1st
blinking straight flange （c）
The meter will automatically work out the height of the 2nd straight flange（x）
Ce manuel convient aux modèles suivants
3
Table des matières
Manuels Instrument analytique populaires d'autres marques
EXTOL PREMIUM
EXTOL PREMIUM 8820043 Instructions d'installation et d'utilisation
RIDGID
RIDGID SeeSnake Compact Manuel utilisateur
Teledyne
Teledyne 3000PA Manuel utilisateur
YDLIDAR
YDLIDAR TIA Manuel utilisateur
Olympus
Olympus IPLEX FX Series Manuel utilisateur
Bosch
Bosch GLM 50 C Professional Manuel utilisateur
