HNE HiPRESS 2 Manuel utilisateur
MADE IN GERMANY
www.hne.ag
USER MANUAL
HiPRESS
PORTABLE
HIGH PERFORMANCE
FOAM EXTINGUISHERS
MADE IN GERMANY www.hne.ag
HiPRESS 2
Content Page
Important information.........................
Symbols and warnings........................
Unpacking.........................................
Storage............................................
Extinguishing agent............................
Device and filling equipment................
Filling of the liquids.............................
Filling of compressed air.......................
Jet gun.............................................
Applying the device.............................
Inspections........................................
Service and maintenance.....................
Technical data....................................
Replacement parts.............................
Warranty...........................................
Declaration of conformity.....................
Contact.............................................
Servicing notes..................................
1
2
2
3
3
4 - 5
6 - 8
9 -11
12
13
13
14
15
16 -17
18
19
20
21
MADE IN GERMANY
www.hne.ag
HiPRESS 2
Important basic information
This manual is an important part of the extinguisher. It refers
to safe and proper use of the device in the interest of safety.
It has to be accessible for users and must be passed on in
case of sale.
We assume no liability for injuries, damage or malfunctions,
which arise due disregard of these user instructions.
The warranty for this device applies for flaws of material,
assembly, quality and function. It is void if the device is not
applied, operated and maintained as described.
Without our written permission, no content of this manual
shall be reproduced or forwarded to others. All technical
specifications and illustrations are subject to copyright.
Technical modifications are subject to change without notice.
thank you for choosing one of our products. You have acquired
premium class fire fighting equipment, worldwide known for
superior performance and highest quality.
This manual will help you to keep operational readiness and
lifespan of your HNE-device on highest level and to take full
advantage of its technical superiority. Please read it carefully
before using the extinguisher for the first time. In case of
questions or technical problems, please contact us.
The extra lightweight HiPress 2 is explicitly designed for use by
security forces. The extra high and constant working pressure
offers excellent fire rating and increased safety and capabilities
for fire fighters during action.
Dear customer,
MADE IN GERMANY www.hne.ag
HiPRESS 2
•Filling adapter with pressure reducer and gauge
•Steel pressure cylinder (CFRP optional), 2 Liter/300 bar
•Transport case for device(s) and filling equipment
Symbols and meaning
Important information is highlighted with the following icons.
Please note it with particular attention in the interest of safety.
Indication of possible danger. Disregard can result in
damage or hazard to device, vicinity, operator or other
persons.
Important information for proper use and handling of
extinguisher, necessary tools, accessories and supplies.
Warning of possible hazards by pollutants and chemicals.
Legal requirements for protection of environment must
be observed.
Additional information, advice and recommendations.
•Extinguisher with hose and jet gun
•Ergonomic backpack wit adjustable straps and quick fasteners
•Plastic bottle with portioned foam concentrate for first filling
Scope of delivery
Unpacking
The whole packing material is recyclable, please dispose
of it in an environmentally responsible way. Check the
condition of packaging and content upon delivery and
contact us immediately in case of damage to the device
due transport.
Accessories (not included):
MADE IN GERMANY
www.hne.ag
HiPRESS 2
In filled condition the extinguisher must be stored in an upright
position. The environment should be dry, cool and dust-free.
Avoid direct sunlight; in the long run, ultraviolet light harms
plastic, rubber and textiles. If filled with regular extinguishing
agent, do not expose the device to temperatures near freezing
point or below. Frozen extinguishing media causes irreparable
damage! Use frost proof additives for cold conditions.
Extinguishing agents
Clean tap water represents the simplest way of filling for non-
polluting and cost-free user training. For foam generation, fill
the device with a mixture that is listed on the containers label.
As suitable extinguishing agents we recommend:
Regular range of temperature: +5 to +60° C
With frost proof extinguishing agent: -25 to +60° C
Do not store the filled extinguisher in horizontal position.
Storage
optimized for HNE-high pressure technology to achieve
superior extinction ratings. For fire class A + B.
MG 6-30
Premix
HNE
63 A
AFFF 6%
Ready-for-use agent with -30°C freeze protection.
Suitable for fire class A + B.
most common foam agent against fires of class A + B.
NOTE: With the use of unlisted extinguishing agents,
the device no longer meets the EN-3 approval. In this
case, successful fire extinction and the safety of the
specified minimum distance to electrical installations
can not be guaranteed by HNE!
Overview
actuator
gauge for
working pressure
jet gun
safety catch
connector for
compressed air
pressure
vessel
head piece
(separable)
MADE IN GERMANY www.hne.ag
HiPRESS 2
Druck-
schlauch
foam nozzle
MADE IN GERMANY
www.hne.ag
HiPRESS 2
Compressed air cylinder
stop cock
Quick
coupling
Safety valve
Filling adapter
Gauge for
compressed
air cylinder
Hand wheel for
bottle connection
Protection cap
Pressure reducer
Steel (CFFR optional)
2 Liter / 300 bar
Hand wheel
DIN-thread
for 300 bar
Protection cap
VARIO 9
HiPRESS 4 und 4duo
MADE IN GERMANY www.hne.ag
HiPRESS 2
Basic rules for refilling
The extinguisher achieves optimal performance only when
accurately filled. Prepare things thoroughly and perform all steps
with necessary care. We recommend a clean and steady work
area with water supply.
Avoid spilling of extinguishing agent. Flush affected
surfaces and components with water.
Empty the container completely before filling.
Dispose of chemicals with ecological responsibility.
Do not use any leftover extinguishing fluid again.
Never overfill the container.
The threads of container and lid have to be free of dirt
and debris. Clean it if necessary and apply a light coat
of silicone grease.
Always wear goggles, gloves and apron when dealing
with extinguishing agent. The chemicals can cause skin
irritation or allergies.
After contact with eyes or mouth, immediately flush out
with plenty of clean water.
Also observe the safety instructions in the data sheet of
the extinguishing agent manufacturer.
Extinguishing agents are polluting and hazardous to
health. They must not seep into soil or sewer system.
Use a suitable container to dispose of it in an
environmentally friendly way.
We recommend to mark the extinguisher after filling as
ready for use. For example, a paper seal can state the
date and type of extinguishing agent.
VARIO 9
MADE IN GERMANY
www.hne.ag
The head piece with its riser
pipe can now be removed
from the container.
Always relief the system
from any residual pressure
before opening. Actuate the
jet gun until no more
hissing is heard. Only then
you may unscrew the
pressure vessel.
Even after complete discharge
of the extinguisher, new
pressure may occur due rising
temperature.
Venting and opening:
Hold the head piece and turn
the container counterclockwise
until it is completely separated
HiPRESS 2
MADE IN GERMANY www.hne.ag
HiPRESS 2
The container requires 1.5 liters of total filling volume. For user
training, you can use pure water. The amount of additive for foam
generation depends on the used extinguishing agent. Approved
foam agents and their dosage are listed on the label of the
container and must be strictly observed.
Closing the container:
Filling of the liquids:
apply
silicone
grease
2
H2O
First, fill the exact
amount of water
into the container...
1
Put the head piece back into the vessel
and screw it tightly.
... then add the foam
concentrate. The liquids
are self-mixing, stirring
is unnecessary.
NOTE:
A thin layer of silicon grease on thread and sealing
surface prevents corrosion and facilitates opening.
Tightening the container by hand is
sufficient. Do not use tools.
Check the filter holes at the end of the riser
pipe. Remove dirt.
●
●
●
Be sure that the container is completely empty and clean
before filling.
filter holes
riser
pipe
Table des matières
Autres manuels HNE Extincteur
Manuels Extincteur populaires d'autres marques
Housegard
Housegard PE2TGH Manuel utilisateur
Amerex
Amerex 322 Manuel utilisateur
IFEX Technologies
IFEX Technologies IFEX 3000 Manuel utilisateur
CaptiveAire
CaptiveAire DI-PSP Manuel utilisateur
First Alert
First Alert FEBRA5-6 Instructions d'installation
First Alert
First Alert FE10GO Instructions d'installation
First Alert
First Alert FESA5 Manuel utilisateur
Task Force Tips
Task Force Tips Extend-A-Gun XG12 Manuel de programmation
Sea-Fire
Sea-Fire FM200 Manuel de service
SenseTek
SenseTek CEA10 Manuel utilisateur
Tyco Fire Protection Products
Tyco Fire Protection Products FAST2000/2 Manuel utilisateur
FireFlex Systems Inc.
FireFlex Systems Inc. ICAF System Manuel