HNC HT3000 Manuel utilisateur
High-speed & HD HMI User Manual
HT3000 Cloud HMI User Manual
Human Machine Interface
2 / 28
Contents
Product Description
1. Product Introduction......................................................................................................................................................................................... 3
2. Product Specifications..................................................................................................................................................................................... 3
3. HMI Bundled software......................................................................................................................................................................................4
4. HMI interface diagram......................................................................................................................................................................................5
Software Instructions
1. HMI connection settings.................................................................................................................................................................................. 6
a. Notes and hardware installation steps................................................................................................................................................. 6
Notes............................................................................................................................................................................................. 6
Hardware installation steps........................................................................................................................................................ 6
b. Hardware wiring....................................................................................................................................................................................... 6
Devices connection with power................................................................................................................................................. 6
Devices connection..................................................................................................................................................................... 6
c. Network connection.................................................................................................................................................................................6
2. Project running.................................................................................................................................................................................................. 7
a. Select device models.............................................................................................................................................................................. 7
b. Download project..................................................................................................................................................................................... 8
c. Run project................................................................................................................................................................................................8
3. HTCloud manager............................................................................................................................................................................................ 8
a. Enter device manager interface............................................................................................................................................................ 8
Local manger................................................................................................................................................................................8
Could manager.............................................................................................................................................................................9
b. Excute device management.................................................................................................................................................................. 9
Download project......................................................................................................................................................................... 9
Upload project.............................................................................................................................................................................. 9
Offline update............................................................................................................................................................................. 10
Start calibration.......................................................................................................................................................................... 10
Update device-time................................................................................................................................................................... 10
Get the PN code........................................................................................................................................................................ 10
Check the device version......................................................................................................................................................... 11
Upload the history record......................................................................................................................................................... 11
Restart the device......................................................................................................................................................................12
4. Background settings....................................................................................................................................................................................... 13
a. Project Settings......................................................................................................................................................................................13
Connect Network Engineering.................................................................................................................................................13
Download project....................................................................................................................................................................... 13
b. Network Settings....................................................................................................................................................................................15
Ethernet connection.................................................................................................................................................................. 15
WI-FI settings............................................................................................................................................................................. 15
Personal hot spot.......................................................................................................................................................................17
Network configuration model................................................................................................................................................... 18
Routing configuration................................................................................................................................................................ 19
c. Settings....................................................................................................................................................................................................22
Settings....................................................................................................................................................................................... 22
Security settings.........................................................................................................................................................................23
Others..........................................................................................................................................................................................25
System Information................................................................................................................................................................... 26
Cloud settings.............................................................................................................................................................................27
Multi-language settings.............................................................................................................................................................28
Exit background settings.......................................................................................................................................................... 28
3 / 28
Product Description
1. Product Introduction
Main function
HT3000 Embedded System is an embedded system software running in industrial automation monitoring and management
equipment. Through running HTCloud Designer project, it can visually observe the situations of the industrial scene and
communicate with various industrial control equipment, by the collected production signals of industrial sites to achieve monitor.
The alarm information of the industrial site is promptly notified to the relevant staffs through the form of screen, computer
language, WeChat, SMS, and mail. Support the function of network project, so that multiple devices can be mutually client and
server, share data through the network to realize distributed control. Also support recording and storing data. Analyze and
record the real-time working condition data and historical working condition data to solve production failures, improve
production efficiency and product quality.
HT3000 high-speed version is a new series of HMI launched by HNC. in 2019, based on the original HMI system to improve the
speed of the HT3000 series, and on the basis of HT3000 to optimize the definition of HD version HT3000-H series.
Technical characteristics
HT3000 embedded system is based on embedded Linux system development, integrated SVG image editing and processing
technology, TCP / IP network communication technology, serial communication technology, multi-threading, multi-process,
Javascript extended script analysis and running engine and other technologies for development.
2. Product Specifications
Specification
Model
HT3000-7 HT3000-7W
HT3000-7E HT3000-7EW
HT3000-H7 HT3000-H7W
HT3000-H7EW
HT3000-10 HT3000-10W
HT3000-10E HT3000-10EW
Display
Display
7〃TFT
7〃TFT
10.1〃TFT
Resolution
800x480pixels
1024x600pixels
1024x600pixels
Colors
16.7M
Brightness(cd/m²)
300
300
350
Contrast Ratio
800:01:00
800:01:00
500:01:00
Touch Type
Resistive Type
Backlight
Backlight Type
LED
Backlight Life Time
20,000 Hours
Automatic Dormancy
Support and Configurable
Software
Management software
HTCloud Designer
Memory
Flash
4GB
RAM
512M
I/O Port
Micro SD Card Slot
Support
SIM Card
Support 4G network
Ethernet Port
10/100 Base-T
COM port
RS485/RS232
USB HOST
USB2.0 x 2
Print Port
COM Port/USB Print
Power
Input power
24±20%VDC
Power Consumption
7W
7W
10W
Power Isolation
Built-in
Voltage Resistance
500VAC
Isolation Resistance
Exceed 50MΩ @500VDC
Vibration Endurance
10 ~ 25 Hz (X, Y, Z direction 2G/30 minutes)
Environment
Cooling Type
Natural air Cooling
Protection Structure
IP65
Storage Temperature
-20 ~70℃
Operating Temperature
-10℃~ 60℃
Relative Humidity
10 ~ 90%RH (non-condensing)
Specification
Enclosure
Engineering Plastic ABS (Flame-retardant level)
Dimensions
200x146x37mm
200x146x37mm
270x212x35mm
Panel Cutout
193x138mm
193x138mm
260x202mm
Weight
0.8kg
0.8kg
1.3kg
Network
WI-FI (Optional)
802.11b/g/n
Wireless (Optional)
4G/3G/2G
4 / 28
7" IOT Cloud HMI——High Speed
Model
TFT screen
Storage
LAN
USB
COM
WI-FI
Wireless
Hole Size
Dimension W*H*D
HT3000-7
7" 800*480
4G + 512M + SD
1
2
3
193x138
200x146x37mm
HT3000-7W
7" 800*480
4G + 512M + SD
1
2
3
Yes
HT3000-7E
7" 800*480
4G + 512M + SD
1
2
2
Global 4G/3G/2G
HT3000-7EW
7" 800*480
4G + 512M + SD
1
2
2
Yes
Global 4G/3G/2G
7" IOT Cloud HMI——HD
Model
TFT screen
Storage
LAN
USB
COM
WI-FI
Wireless
Hole Size
Dimension W*H*D
HT3000-H7
7" 1024x600
4G + 512M + SD
1
2
3
193x138
200x146x37mm
HT3000-H7W
7" 1024x600
4G + 512M + SD
1
2
3
Yes
HT3000-H7E
7" 1024x600
4G + 512M + SD
1
2
2
Global 4G/3G/2G
10.1" IOT Cloud HMI——High Speed
Model
TFT screen
Storage
LAN
USB
COM
WI-FI
Wireless
Hole Size
Dimension W*H*D
HT3000-10
10.1" 1024x600
4G + 512M + SD
1
2
3
260x202
270x212x35mm
HT3000-10W
10.1" 1024x600
4G + 512M + SD
1
2
3
Yes
HT3000-10E
10.1" 1024x600
4G + 512M + SD
1
2
2
Global 4G/3G/2G
HT3000-10EW
10.1" 1024x600
4G + 512M + SD
1
2
2
Yes
Global 4G/3G/2G
3. HMI Bundled software
HT3000 needs to be used with HTCloud Designer editing software. Please download from HNC official website:
http://www.hncelectric.com/.
It is also recommended to download HNC Cloud APP “IoTBus”
HNC Cloud APP “IoTBus” download:
Login and download from HNC Cloud website: http://www.iotbus.net/#/login?language=en
For iOS terminal, it can search and download "IoTBus"APP in Apple App Store.
Scan the QR code below to download.
5 / 28
4. HMI interface diagram
HT3000-7/10/H7 HT3000-7 HT3000-10 HT3000-H7
Port diagram and pin definition：
HT3000-7/10/H7
COM3
RS232 RS485
Rxd Txd Gnd B- A+ USB
COM1
RS232 422 485 CAN LAN
24VDC
-+COM2
COM1 Pin definition
Pin
Definition
Pin
Definition
1
Carrier detect(DCD)
6
Data ready(DSR)
2
Receive data(RXD)
7
Request to send(RTS)
3
Transmit Data (TXD)
8
Clear to send(CTS)
4
Data terminal ready(DTR)
9
Ringing indicating(RI)
5
Signal ground(SG)
HT3000-7W/HT3000-10W/HT3000-H7W
COM3
RS232 RS485
Rxd Txd Gnd B- A+ Wifi USB
COM1
RS232 422 485 CAN LAN
24VDC
-+COM2
COM1 Pin definition
Pin
Definition
Pin
Definition
1
Carrier detect(DCD)
6
Data ready(DSR)
2
Receive data(RXD)
7
Request to send(RTS)
3
Transmit Data (TXD)
8
Clear to send(CTS)
4
Data terminal ready(DTR)
9
Ringing indicating(RI)
5
Signal ground(SG)
6 / 28
HT3000-7E/HT3000-10E/HT3000-H7E
COM1
RS232 RS485
Rxd Txd Gnd B- A+ USB
4G
SIM LAN
24VDC
-+COM2
HT3000-7EW/HT3000-10EW/HT3000-H7EW
Software Instructions
1. HMI connection settings
HT3000 communicates with the PLC through the RS232 serial port, RS485 serial port or Ethernet port. During the hardware
wiring process, the HT3000-10 communicates with the PLC through the RS232 serial port and connects to the static Ethernet
network.
a. Notes and hardware installation steps
Notes
①The installation direction must be in accordance with the provisions of this manual, strictly in accordance with the direction of
the terminal wiring, otherwise it will cause product failure or burnout.
②The HMI and other components which are at the bottom must maintain sufficient space to avoid equipment damage caused
by poor heat dissipation
Hardware installation steps
Install the HMI into the cut-out panel and lock the four buckles on the side with the mounting panel.
b. Hardware wiring
Devices connection with power
HMI and PLC both connect with power.
Devices connection
HMI's COM-RS232 interface is connected to the PLC's RS232 interface;
c. Network connection
Step 1: Long press the upper right corner of the HMI device to enter the background settings interface.
Step: 2: Click [Network] to enter the Ethernet settings interface;
Step 3: Open [Switch] for network;
Step 4: You can select [Static IP] or [DHCP] as needed. When the network type selects [Static IP], you need to set the network
7 / 28
parameters: enter the correct IP address, subnet mask, default gateway and DNS, click [Save] After the verification is passed,
the HMI device can connect to the network via Ethernet.
2. Project running
a. Select device models
Step 1: Open HTCloud Designer software and set up a new project;
Step 2: Open [Project configuration] in the project browser, and click [Project properties] to enter the project property
configuration interface.
Step 3: Select the device model in the [Layout Info] field, which is consistent with the current device model. In this example,
HT3000-10 is taken as an example. Select HT3000-10 and click [OK].
8 / 28
b. Download project
Project Step 1: Enter the device manager, you can choose to use the local manager or cloud manager;
Step 2: Click [Download project] to enter the project download confirmation interface;
Step 3: In the confirmation download interface, you can choose whether to reserve the history and alarm records, whether to
reserve the formula and whether to package the font download. After the setting completed, click [OK];
Step 4: Wait for the pop-up prompt"Download successful!" and click [OK] to run the project on the device.
c. Run project
After the project successfully downloaded, wait for the HMI to restart, and after restart successfully, the HMI will automatically
open the project startup screen, and users can use the project as needed.
3. HTCloud manager
Open the HTCloud Designer software in computer, click the device manager icon of menu; or click the [project}, open the
[HTCloud Designer] installation document ,open the [HTCloud Manager] and enter device manager. Support to use the local
manager and cloud manager effective control HMI.
a. Enter device manager interface
Local manger
Enter device manager,click[local manager], set up IP address up on device and select device, click [mange] and enter currently
device manger, you can operate the current device as shown below
9 / 28
Could manager
Step 1: enter device manager, click [ cloud manager ], optional log in with mobile phone or email. PS: device administrator and
machine owner can manage current device through cloud manager, common user don’t have administrative authority.
Step 2: user input correct account and password, click [ sign in ] enter device manager, choice[ manage ]. enter current device
manager, can operating current device, the following diagram:
b. Excute device management
Download project
Step 1: click [ download project ], enter project download confirm;
Step 2: In the confirmation download interface can choose whether to keep the history and alarm records, whether to keep the
recipe, and whether to download the packaged fonts. After the setting are complete, click [OK];
Step 3: Wait for the pop-up prompt "Download successful!", click [OK], running the project in device.
Upload project
Step 1: click [ upload project ], choice the upload path and project name, click save;
Step 2: enter project upload and confirm interface, if project set up upload password, need to input the upload in [ project
10 / 28
upload password]; if the project don’t have to set up the upload password, no pass word is required here;
Step 3: click [ upload ], wait for the pop-up prompt " upload successful!", click [OK], running the project of device in PC.
Firmware update
Step 1: click [Firmware update],choice firm package, click [open], The latest firmware update package can be get from HNC
Step 2: enter offline update confirm interface, click [update]
Step 3:waiting for update to complete, pop-up prompt " update success", click [OK].
Start calibration
Click [ start calibration ],the device enter the calibration interface, press the calibration mark 1above the screen for long
time, and enter next calibration site, calibration the device touch the screen in order of "left, right, up, down, mid"
Update device-time
Click [update device time], can to update system time of device. When update to complete, you can device-time, device -time
and system time of PC are same.
Get the PN code
Click [get PN code], can to view the current PN code of device.
Table des matières
Manuels Écran tactile populaires d'autres marques
IBASE Technology
IBASE Technology ASTUT-152-RE1S Manuel utilisateur
YASKAWA
YASKAWA TP 610C Manuel utilisateur
B&R
B&R Power Panel C Series Manuel utilisateur
Beijer Electronics
Beijer Electronics X2 control Manuel utilisateur
AXIOMTEK
AXIOMTEK GOT321W-521 Manuel utilisateur
TRIDONIC.ATCO
TRIDONIC.ATCO x-touchBOX Manuel utilisateur
