HMS Networks Anybus Manuel utilisateur

Anybus®Industrial WLAN Access Point

USER MANUAL

SCM-1202-155 1.0 en-US ENGLISH

Important User Information

Disclaimer

The information in this document is for informational purposes only. Please inform HMS Industrial Networks of any

inaccuracies or omissions found in this document. HMS Industrial Networks disclaims any responsibility or liability

for any errors that may appear in this document.

HMS Industrial Networks reserves the right to modify its products in line with its policy of continuous product

development. The information in this document shall therefore not be construed as a commitment on the part of

HMS Industrial Networks and is subject to change without notice. HMS Industrial Networks makes no commitment

to update or keep current the information in this document.

The data, examples and illustrations found in this document are included for illustrative purposes and are only

intended to help improve understanding of the functionality and handling of the product. In view of the wide range

of possible applications of the product, and because of the many variables and requirements associated with any

particular implementation, HMS Industrial Networks cannot assume responsibility or liability for actual use based on

the data, examples or illustrations included in this document nor for any damages incurred during installation of the

product. Those responsible for the use of the product must acquire sufficient knowledge in order to ensure that the

product is used correctly in their specific application and that the application meets all performance and safety

requirements including any applicable laws, regulations, codes and standards. Further, HMS Industrial Networks will

under no circumstances assume liability or responsibility for any problems that may arise as a result from the use of

undocumented features or functional side effects found outside the documented scope of the product. The effects

caused by any direct or indirect use of such aspects of the product are undefined and may include e.g. compatibility

issues and stability issues.

Anybus®Industrial WLAN Access Point User Manual SCM-1202-155 1.0 en-US

Table of Contents Page

1 Preface ................................................................................................................................. 3

1.1 About This Document .......................................................................................................3

1.2 Document Conventions.....................................................................................................3

1.3 Trademarks.....................................................................................................................4

2 Safety ................................................................................................................................... 5

2.1 General Safety Instructions................................................................................................5

2.2 Intended Use...................................................................................................................5

3 Preparation.......................................................................................................................... 6

3.1 Support and Resources .....................................................................................................6

4 Installation........................................................................................................................... 7

4.1 Pole Mounting.................................................................................................................7

4.2 Wall Mounting.................................................................................................................8

4.3 DIN Rail Mounting............................................................................................................9

4.4 Connecting Ground Screw .................................................................................................9

4.5 Connecting Access Point IP30 to Power.............................................................................. 10

4.6 Connecting Access Point IP 67 to Power............................................................................. 12

4.7 Connecting to Ethernet ................................................................................................... 13

4.8 Connecting Antennas...................................................................................................... 14

5 Configuration..................................................................................................................... 15

5.1 Before You Begin Configuration........................................................................................ 15

5.2 Accessing the Web Management Interface ......................................................................... 15

5.3 Configure the Country/Region Settings .............................................................................. 16

5.4 Submit and Save Configuration......................................................................................... 16

5.5 Factory Reset ................................................................................................................ 17

5.6 System ......................................................................................................................... 18

5.7 Ethernet Port ................................................................................................................ 21

5.8 Wireless LAN................................................................................................................. 22

5.9 Security........................................................................................................................ 29

5.10 Warning ....................................................................................................................... 33

5.11 Diagnostics ................................................................................................................... 34

5.12 Backup/Restore ............................................................................................................. 36

5.13 Firmware Upgrade ......................................................................................................... 37

5.14 Reset to Default............................................................................................................. 38

Anybus®Industrial WLAN Access Point User Manual SCM-1202-155 1.0 en-US

6 Verify Operation................................................................................................................ 39

7 Technical Data ................................................................................................................... 41

7.1 Technical Specifications................................................................................................... 41

A Wireless Technology Basics .............................................................................................. 43

Preface 3 (44)

1 Preface

1.1 About This Document

This document describes how to install and configure the Anybus Industrial WLAN Access Point.

For additional documentation and software downloads, FAQs, troubleshooting guides and

technical support, please visit www.anybus.com/support.

1.2 Document Conventions

Numbered lists indicate tasks that should be carried out in sequence:

1. First do this

2. Then do this

Bulleted lists are used for:

• Tasks that can be carried out in any order

• Itemized information

►An action

→ and a result

User interaction elements (buttons etc.) are indicated with bold text.

Program code and script examples

Cross-reference within this document: Document Conventions, p. 3

External link (URL): www.hms-networks.com

WARNING

Instruction that must be followed to avoid a risk of death or serious injury.

AVERTISSEMENT

Instruction à suivre pour éviter tout risque de décès ou de blessure grave.

Caution

Instruction that must be followed to avoid a risk of personal injury.

Attention

Instruction à suivre pour éviter tout risque de blessure.

Instruction that must be followed to avoid a risk of reduced functionality and/or damage

to the equipment, or to avoid a network security risk.

Additional information which may facilitate installation and/or operation.

Anybus®Industrial WLAN Access Point User Manual SCM-1202-155 1.0 en-US

Preface 4 (44)

1.3 Trademarks

Anybus®is a registered trademark of HMS Industrial Networks. All other trademarks mentioned

in this document are the property of their respective holders.

Anybus®Industrial WLAN Access Point User Manual SCM-1202-155 1.0 en-US

Safety 5 (44)

2 Safety

2.1 General Safety Instructions

Caution

Ensure that the power supply is turned off before connecting it to the equipment.

Attention

Assurez-vous que l’alimentation électrique est coupée avant de la brancher sur

l’équipement.

Connecting power with reverse polarity or using the wrong type of power supply may

damage the equipment. Make sure that the power supply is connected correctly and of

the recommended type.

This equipment contains parts that can be damaged by electrostatic discharge (ESD). Use

ESD prevention measures to avoid damage.

2.2 Intended Use

The intended use of this equipment is to provide wireless LAN connectivity. The equipment

receives and transmits data on various physical levels and connection types.

If this equipment is used in a manner not specified by the manufacturer, the protection provided

by the equipment may be impaired.

Anybus®Industrial WLAN Access Point User Manual SCM-1202-155 1.0 en-US

Preparation 6 (44)

3 Preparation

3.1 Support and Resources

For additional documentation and software downloads, FAQs, troubleshooting guides and

technical support, please visit www.anybus.com/support.

Have the product article number available, to search for the product specific support web page. You find

the product article number on the product cover.

Anybus®Industrial WLAN Access Point User Manual SCM-1202-155 1.0 en-US

Installation 7 (44)

4 Installation

4.1 Pole Mounting

Option for access point IP67

1. Use the four included screws and washers to attach the mounting bracket to the access

point.

2. Insert the two included metal bands into the mounting bracket strap slots.

3. Position the metal bands and the mounting bracket on the pole as needed.

4. Tighten the metal bands to the pole and lock them by tightening the screws.

Ensure that the access point is firmly secured to the pole.

Anybus®Industrial WLAN Access Point User Manual SCM-1202-155 1.0 en-US

Installation 8 (44)

4.2 Wall Mounting

Option for access point IP67

1. Use the four included screws and washers to attach the mounting bracket to the access

point.

2. Drill four holes in the wall and insert wall anchors.

3. Use four screws to attach the mounting bracket to the wall.

Anybus®Industrial WLAN Access Point User Manual SCM-1202-155 1.0 en-US

Autres manuels pour Anybus

Table des matières

Autres manuels HMS Networks Point d'accès sans fil

HMS Networks

HMS Networks Anybus Guide de l'utilisateur

Manuels Point d'accès sans fil populaires d'autres marques

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Manuel utilisateur

Ubiquiti

Ubiquiti NanoStation NSM2 Manuel utilisateur

Cisco

Cisco Aironet 1550 Series Manuel utilisateur

Aruba

Aruba IAP-335 Manuel utilisateur

Advantek Networks

Advantek Networks AWN-AP-54MR Manuel utilisateur

IP-COM

IP-COM AP355 Manuel utilisateur

Buffalo

Buffalo AirStation WLA-L11G Manuel utilisateur

EnGenius

EnGenius EnStationACv2 Manuel utilisateur

D-Link

D-Link DAP-3662 Manuel utilisateur

xG Technology

xG Technology xMax CN1300 Manuel utilisateur

Widelink

Widelink ezWave WAP-1100 Series Manuel utilisateur

Edimax

Edimax CAP1200 Manuel utilisateur

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Manuel utilisateur

Aruba

Aruba AP-203R Manuel utilisateur

LuXout Shades

LuXout Shades LUXSHADE MOTION Manuel utilisateur

CreatComm

CreatComm TB5F Manuel utilisateur

SineDigital

SineDigital MW-1500AP(H) Manuel utilisateur

TP-Link

TP-Link AP9650 V1 Manuel utilisateur