HMS Networks AC Cloud Control Guide rapide

Device Configuration with Bluetooth

Issue date: 03/2022

V1.0

Device Configuration with Bluetooth

This information is subject to change without notice

URL https://www.intesis.com

2 / 17

Important User Information

Disclaimer

The information in this document is for informational purposes only. Please inform HMS

Industrial Networks of any inaccuracies or omissions found in this document.

HMS Industrial Networks disclaims any responsibility or liability for any errors that may appear

in this document. HMS Industrial Networks reserves the right to modify its products in line

with its policy of continuous product development. The information in this document shall

therefore not be construed as a commitment on the part of HMS Industrial Networks and is

subject to change without notice. HMS Industrial Networks makes no commitment to update

or keep current the information in this document.

The data, examples and illustrations found in this document are included for illustrative

purposes and are only intended to help improve understanding of the functionality and

handling of the product. In view of the wide range of possible applications of the product, and

because of the many variables and requirements associated with any implementation, HMS

Industrial Networks cannot assume responsibility or liability for actual use based on the data,

examples or illustrations included in this document nor for any damages incurred during

installation of the product. Those responsible for the use of the product must acquire sufficient

knowledge to ensure that the product is used correctly in their specific application and that

the application meets all performance and safety requirements including any applicable laws,

regulations, codes and standards. Further, HMS Industrial Networks will under no

circumstances assume liability or responsibility for any problems that may arise as a result

from the use of undocumented features or functional side effects found outside the

documented scope of the product. The effects caused by any direct or indirect use of such

aspects of the product are undefined and may include e.g. compatibility issues and stability

issues.

Device Configuration with Bluetooth

This information is subject to change without notice

URL https://www.intesis.com

3 / 17

INDEX

1. Overview...................................................................................................................................................4

About this document.................................................................................................................................4

Preparing for configuration .......................................................................................................................4

2. AC Cloud Control device..........................................................................................................................6

Description................................................................................................................................................6

Toggle button............................................................................................................................................6

3. Selecting an AC Cloud Control device .....................................................................................................6

a) If you are not logged into the App.....................................................................................................6

b) If you already logged in.....................................................................................................................7

4. Connection to the Wi-Fi network ..............................................................................................................9

Automatic..................................................................................................................................................9

Manual................................................................................................................................................... 11

WPS....................................................................................................................................................... 12

Scan a Wi-Fi network QR code............................................................................................................. 13

Advanced Configuration........................................................................................................................ 14

5. LED color code...................................................................................................................................... 16

LED color code during Wi-Fi configuration............................................................................................ 16

6. Shortcuts................................................................................................................................................ 16

Reset Wi-Fi settings or enabling configuration mode............................................................................ 16

WPS mode activation ............................................................................................................................ 17

Clean AC Cloud Control devices list, when using the Android App ...................................................... 17

Device Configuration with Bluetooth

This information is subject to change without notice

URL https://www.intesis.com

4 / 17

1. Overview

About this document

This document describes the Wi-Fi network configuration process of AC Cloud Control

devices using Bluetooth. It also contains description of device´s toggle button

functionalities and the meaning of the AC Cloud Control LED colors.

About the solution

AC Cloud Control is the perfect IoT solution for professional AC management. It has

been developed with the collaboration of the main AC manufacturers enabling the

control of any domestic, commercial or VRF unit from a mobile application or from any

web browser.

AC Cloud Control system offers many functionalities, for that reason is considered the

suitable solution to control offices, stores, schools, or any other commercial building.

Figure 1.- AC Cloud Control integration.

Preparing for configuration

Before starting, be sure you have everything you need for configuration:

•AC Cloud Control device

Also named AC Cloud Control throughout this document.

Figure 2.- AC Cloud Control device.

IMPORTANT: Make sure you have the proper AC Cloud Control. It depends on the Indoor Unit

model. Check the compatibility tool.

Device Configuration with Bluetooth

This information is subject to change without notice

URL https://www.intesis.com

5 / 17

•Access point

AC Cloud Control supports 2.4GHz band and 802.11 b/g or /n mode.

•Smart device

Android and iOS operative systems are supported.

•AC Cloud Control App

Download and install in your smart device.

After enabling the Bluetooth on the smart device, get it close to the Access Point and

AC Cloud Control to start the configuration.

Figure 4.- Smart device

Figure 3.- Access Point

Figure 5.- AC Cloud Control App.

Figure 6.- Getting started.

IMPORTANT: Beware of the signal strength, if you cannot get more than two

connectivity lines get the smart device closer to the router. A bad signal quality

might lead to AC Cloud Control´s intermittent disconnections.

Device Configuration with Bluetooth

This information is subject to change without notice

URL https://www.intesis.com

6 / 17

2. AC Cloud Control device

Description

Toggle button

To understand the functionality of this button, refer to the Shortcuts section.

3. Selecting an AC Cloud Control device

There are two ways to start the configuration of an AC Cloud Control:

a) If you are not logged into the App:Tap on Device configuration on the App main

screen.

Figure 9.- AC Cloud Control App - main screen.

Figure 7.- AC Cloud Control device

Figure 8.- AC Cloud Control toggle button.

Device Configuration with Bluetooth

This information is subject to change without notice

URL https://www.intesis.com

7 / 17

b) If you already logged in: Go to settings and select the AC Cloud Control+ icon.

Figure 10.- AC Cloud Control App - settings menu.

The App will show instructions to prepare for configuration. It is important for you to

confirm that the device is in configuration mode (LED steady green).

Then, select Bluetooth.

Figure 11.- Wi-Fi configuration - Bluetooth.

AC Cloud Control devices are shown in the SCANNED list, select the one to configure.

Important: This configuration guide applies to AC Cloud Control with order code

INWIFIXXX001R1XX. In case the order code is different, refer to

Device

Configuration manual.

Device Configuration with Bluetooth

This information is subject to change without notice

URL https://www.intesis.com

8 / 17

In case you are not sure which AC Cloud Control you are linking, check the last 6 digits

of the MAC address, then select the correct one to proceed.

Figure 12.- Device selection.

Accept the Bluetooth paring request.

When having multiple AC Cloud Control on the installation, there is an easy way to

recognize them. Tap on Identify INTESIS_XXXXXX

. The LED will start blinking white

and a message will pop-up.

Being XXXXXX the last 6 digits of AC Cloud Control´s MAC address.

Important: In case the Bluetooth is disabled a message will pop-up asking to enable it.

Figure 13.- Bluetooth pairing request and signal error.

Device Configuration with Bluetooth

This information is subject to change without notice

URL https://www.intesis.com

9 / 17

Figure 15.- Identifying an AC Cloud Control device.

4. Connection to the Wi-Fi network

There are different options to link AC Cloud Control to a Wi-Fi network:

Automatic

White

Blinking

OFF

10 sec

Figure 14.- Wink/Identify a device - command.

Figure 16.- Configuration screen.

Device Configuration with Bluetooth

This information is subject to change without notice

URL https://www.intesis.com

10 / 17

Select the Wi-Fi network SSID from the list to link AC Cloud Control, fill-in the

password and Connect.

AC Cloud Control will perform a connection sequence with the cloud server and

depending on the communication phase, the LED will blink accordingly:

Figure 18.- Lighting Wi-Fi Configuration sequence.

If any error occurs during the configuration, the LED will start blinking. To understand what

the problem could be, check the LED color code table in section 5.

Important: If the LED turns off, the configuration process is completed and successful.

Figure 17.- Wi-Fi Network selection

Table des matières

Autres manuels HMS Networks Accessoires pour climatiseurs

HMS Networks

HMS Networks Intesis EIA-485 Manuel utilisateur

HMS Networks

HMS Networks Intesis AC Cloud Control Manuel utilisateur

HMS Networks

HMS Networks Intensis INBACTOS001R000 Manuel utilisateur

Manuels Accessoires pour climatiseurs populaires d'autres marques

Unitary products group

Unitary products group 2CE Series Manuel utilisateur

Qlima

Qlima EU-ODZ104 Manuel utilisateur

EMI

EMI 550000565 Manuel utilisateur

ActronAir

ActronAir MRE-035AS Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric RCN-K-E Manuel utilisateur

Tecnosystemi

Tecnosystemi smart clima INFINITY BLUE RIVER Manuel utilisateur

EINHELL

EINHELL Hot Air Stop Manuel utilisateur

ActronAir

ActronAir ERQ2-16AS Manuel utilisateur

Sharp

Sharp AZ-F900E Manuel utilisateur

Danby

Danby DPSL120B1W Manuel utilisateur

INABA DENKO

INABA DENKO DSH-UP20E20E-07 Manuel utilisateur

ActronAir

ActronAir LM7-2W Manuel utilisateur

Bard

Bard WGEIFM-3C Manuel utilisateur

Toro

Toro LT3240 Manuel utilisateur

Johnson Controls

Johnson Controls PD-75A Manuel utilisateur

Trane

Trane BAYECON104AA Instructions de montage

Fujitsu

Fujitsu UTZ-KXGC Manuel utilisateur

INABA DENKO

INABA DENKO TK Series Manuel utilisateur