HL HL-1060L Manuel utilisateur
www.hl-yeah.com
1
Laser Engrave Machine HL-1060L 100W Manual
www.hl-yeah.com
5
www.hl-yeah.com
6
Section II. Uncrating HL-100W 1060L
1. Uncrating HL-100W 1060L
Crate size is on the right. That needs
to lift it from one side and pull out this
machine.
Machine size on the left
Machine front
www.hl-yeah.com
7
Machine back
Machine control unit
2. Parts & Accessories
www.hl-yeah.com
8
Section III. Installation & Assembly
1. Connect the Exhaust(Optional part, buy separately)
www.hl-yeah.com
9
2. Connect the Water Chiller& Air Compressor
CO2 Laser machines use water cooling laser tubes. Laser technology is such
that the laser tubes generate a lot of excess heat and the tubes must be
cooled for proper operation. Equipment running environment humidity：5%～
95%（free of condensed water）Keep the temperature of the water chiller
between 5℃～40℃
a. Laser Machine Water OUT to Chiller INLET
b. Laser Machine Water IN to Chiller OUTLET
c. Laser Machine into Air to Air Compressor
3. Connect Electrical Power
www.hl-yeah.com
10
4. Connecting PC via USB Cable or RJ45 Ethernet Cable
5. Remove ties on belts
For transportation safety, ties were implemented to fixed machine laser head
avoiding unexpected movement.
Table des matières
