Hitachi Compute Blade 500 Series Manuel utilisateur
© 2012-2015 Hitachi, Ltd. All rights reserved.
No part of this publication may be reproduced or transmitted in any form or by any means,
electronic or mechanical, including photocopying and recording, or stored in a database or retrieval
system for any purpose without the express written permission of Hitachi, Ltd.
Hitachi, Ltd., reserves the right to make changes to this document at any time without notice and
assumes no responsibility for its use. This document contains the most current information available
at the time of publication. When new or revised information becomes available, this entire
document will be updated and distributed to all registered users.
Some of the features described in this document might not be currently available. Refer to the most
recent product announcement for information about feature and product availability, or contact
Hitachi Data Systems Corporation at https://portal.hds.com.
Notice: Hitachi, Ltd., products and services can be ordered only under the terms and conditions of
the applicable Hitachi Data Systems Corporation agreements. The use of Hitachi, Ltd., products is
governed by the terms of your agreements with Hitachi Data Systems Corporation.
Hitachi is a registered trademark of Hitachi, Ltd., in the United States and other countries. Hitachi
Data Systems is a registered trademark and service mark of Hitachi, Ltd., in the United States and
other countries.
Archivas, Essential NAS Platform, HiCommand, Hi-Track, ShadowImage, Tagmaserve, Tagmasoft,
Tagmasolve, Tagmastore, TrueCopy, Universal Star Network, and Universal Storage Platform are
registered trademarks of Hitachi Data Systems Corporation.
AIX, AS/400, DB2, Domino, DS6000, DS8000, Enterprise Storage Server, ESCON, FICON,
FlashCopy, IBM, Lotus, MVS, OS/390, RS6000, S/390, System z9, System z10, Tivoli, VM/ESA,
z/OS, z9, z10, zSeries, z/VM, and z/VSE are registered trademarks or trademarks of International
Business Machines Corporation.
All other trademarks, service marks, and company names in this document or website are
properties of their respective owners.
Microsoft product screen shots are reprinted with permission from Microsoft Corporation.
ii
Hitachi Compute Blade 500 Series Remote Console User's Guide
Contents
Preface ................................................................................................ v
Intended Audience ................................................................................................. vi
Product Version ..................................................................................................... vi
Release Notes ........................................................................................................ vi
Document Organization .......................................................................................... vi
Referenced Documents .......................................................................................... vi
Document Conventions .......................................................................................... vii
Convention for storage capacity values ................................................................... vii
Getting Help ......................................................................................................... viii
Comments ........................................................................................................... viii
1 Remote console overview ................................................................... 1-1
General overview ................................................................................................. 1-2
Connection to a system console ..................................................................... 1-2
Functions and requirements ................................................................................. 1-2
Main functions .............................................................................................. 1-3
Requirements and restrictions ........................................................................ 1-3
2 Using the remote console ................................................................... 2-1
Starting the remote console ................................................................................. 2-2
Starting remote console using Management module Web console ..................... 2-2
Starting remote console using server blade Web console .................................. 2-6
Remote console window ....................................................................................... 2-8
Remote console messages ................................................................................... 2-9
Remote console menu items ............................................................................... 2-10
File ............................................................................................................. 2-10
View ........................................................................................................... 2-10
Macros ........................................................................................................ 2-11
Tools .......................................................................................................... 2-14
Power ......................................................................................................... 2-17
Help ........................................................................................................... 2-18
Ending the remote console ................................................................................. 2-19
To end the remote console ........................................................................... 2-19
iii
Hitachi Compute Blade 500 Series Remote Console User's Guide
3 Using the virtual media ...................................................................... 3-1
Starting the virtual media console ......................................................................... 3-2
To start the virtual media console ................................................................... 3-2
Virtual media console functions ............................................................................ 3-3
Creating image files ............................................................................................. 3-5
Precautions ................................................................................................... 3-5
Image creating tools ...................................................................................... 3-5
Creating FD image files .................................................................................. 3-5
Creating CD/DVD image files .......................................................................... 3-8
Ending the virtual media console ......................................................................... 3-10
To end the virtual media console .................................................................. 3-11
4 Troubleshooting ................................................................................ 4-1
Troubleshooting problems .................................................................................... 4-2
Restarting BMC .................................................................................................... 4-5
5 End User License ............................................................................... 5-1
Information about end user license ....................................................................... 5-2
End User License ........................................................................................... 5-2
iv
Hitachi Compute Blade 500 Series Remote Console User's Guide
Preface
This document describes how to use the Compute Blade 500 series.
Notice: The use of Compute Blade 500 series and all other Hitachi Data
Systems products is governed by the terms of your agreement(s) with Hitachi
Data Systems.
This preface includes the following information:
□Intended Audience
□Product Version
□Release Notes
□Document Organization
□Referenced Documents
□Document Conventions
□Convention for storage capacity values
□Getting Help
□Comments
Preface v
Hitachi Compute Blade 500 Series Remote Console User's Guide
Intended Audience
This document is intended for the personnel who are involved in planning,
managing, and performing the tasks to prepare your site for Compute Blade
installation and to install the same.
This document assumes the following:
•The reader has a background in hardware installation of computer
systems.
• The reader is familiar with the location where the Compute Blade will be
installed, including knowledge of physical characteristics, power systems
and specifications, and environmental specifications.
Product Version
This document revision applies to management module firmware A0240.
Release Notes
Release notes contain requirements and more recent product information that
may not be fully described in this manual. Be sure to review the release notes
before installation.
Document Organization
The table below provides an overview of the contents and organization of this
document. Click the chapter title in the left column to go to that chapter. The
first page of each chapter provides links to the sections in that chapter.
Chapter Description
Chapter 1, Remote console overview Describes an overview of the remote console.
Chapter 2, Using the remote console Provides information on using the remote console.
Chapter 3, Using the virtual media Provides information on using the virtual media
operation.
Chapter 4, Troubleshooting Describes troubleshooting for the remote console.
Chapter 5, End User License Describes troubleshooting for the remote console.
Referenced Documents
•Hitachi Compute Blade 500 Series Management Module Setup Guide,
MK-91CB500014
• Hitachi Compute Blade 500 Series Server Blade Setup Guide,
MK-91CB500012
vi Preface
Hitachi Compute Blade 500 Series Remote Console User's Guide
Document Conventions
This term "Compute Blade" refers to all the models of the Compute Blade,
unless otherwise noted.
The Hitachi Virtualization Manager (HVM) name has been changed to Hitachi
logical partitioning manager (LPAR manager, or LP). If you are using HVM
based logical partitioning feature, substitute references to Hitachi logical
partitioning manager (LPAR manager, or LP) with HVM.
This document uses the following typographic conventions:
Convention Description
Regular text bold In text: keyboard key, parameter name, property name,
hardware labels, hardware button, hardware switch.
In a procedure: user interface item
Italic Variable, emphasis, reference to document title, called-out term
Screen text Command name and option, drive name, file name, folder name,
directory name, code, file content, system and application
output, user input
< > (angled brackets) Variable (used when italic is not enough to identify variable).
[ ] (square bracket) Optional values
{ } braces Required or expected value
| vertical bar Choice between two or more options or arguments
This document uses the following icons to draw attention to information:
Icon Meaning Description
WARNING This indicates the presence of a potential risk that
might cause death or severe injury.
CAUTION This indicates the presence of a potential risk that
might cause relatively mild or moderate injury.
NOTICE This indicates the presence of a potential risk that
might cause severe damage to the equipment
and/or damage to surrounding properties.
Note This indicates notes not directly related to injury
or severe damage to equipment.
Tip This indicates advice on how to make the best use
of the equipment.
Convention for storage capacity values
Physical storage capacity values (for example, disk drive capacity) are
calculated based on the following values:
Preface vii
Hitachi Compute Blade 500 Series Remote Console User's Guide
Physical capacity unit Value
1 kilobyte (KB) 1,000 (103) bytes
1 megabyte (MB) 1,000 KB or 1,0002 bytes
1 gigabyte (GB) 1,000 MB or 1,0003 bytes
1 terabyte (TB) 1,000 GB or 1,0004 bytes
1 petabyte (PB) 1,000 TB or 1,0005 bytes
1 exabyte (EB) 1,000 PB or 1,0006 bytes
Logical storage capacity values (for example, logical device capacity) are
calculated based on the following values:
Logical capacity unit Value
1 block 512 bytes
1 KB 1,024 (210) bytes
1 MB 1,024 KB or 1,0242 bytes
1 GB 1,024 MB or 1,0243 bytes
1 TB 1,024 GB or 1,0244 bytes
1 PB 1,024 TB or 1,0245 bytes
1 EB 1,024 PB or 1,0246 bytes
Getting Help
The Hitachi Data Systems customer support staff is available 24 hours a day,
seven days a week. If you need technical support, log on to the Hitachi Data
Systems Portal for contact information: https://portal.hds.com.
Comments
Please send us your comments on this document: [email protected].
Include the document title and number including the revision level (for
example, -07), and refer to specific sections and paragraphs whenever
possible. All comments become the property of Hitachi Data Systems
Corporation.
Thank you!
viii Preface
Hitachi Compute Blade 500 Series Remote Console User's Guide
General overview
Remote console is available for Hitachi Compute Blade 500 as a console for
operating sever blades. You can remotely power on or off a server blade,
configure EFI settings, and install an OS with remote console.
Execute the remote console application on a system console to use the
remote console.
Tip: You need to have the administrator privilege to use the remote console
on a system console. If not, some remote console functions may not work.
Connection to a system console
Connect the MGMT0 port of a management module in the rear of the system
unit and a system console with a LAN cable. When two management modules
are installed, connect to the management module with MSR LED lighting solid
green.
Figure 1-1 Connection between a system console and management
module via LAN cable
Note:
•Complete network settings for the system unit before connecting the
management module to the network. If a device with the same IP address
as the management module or other modules in the system unit exists on
the network when the management module is connected to the network,
an error occurs in the system unit.
• Management module is needed to connect with an external LAN switch
while using in LPAR manager mode. For details, see Hitachi Compute
Blade 500 Series Server Blade Setup Guide.
Tip: You can use either cable, a straight cable or cross cable, to connect to
the LAN port of a system console. Data transfer speed is automatically
selected among 10/100/1000 Mb/sec.
Functions and requirements
This section describes functions and operation of the remote console.
1-2 Remote console overview
Hitachi Compute Blade 500 Series Remote Console User's Guide
Autres manuels pour Compute Blade 500 Series
10
Table des matières
Autres manuels Hitachi Serveur
Hitachi
Hitachi VisionBase 8450H Manuel utilisateur
Hitachi
Hitachi Compute Blade 500 Series Manuel utilisateur
Hitachi
Hitachi Compute Blade 500 Series Manuel utilisateur
Hitachi
Hitachi VisionBase 8880R Manuel utilisateur
Hitachi
Hitachi Compute Blade 500 Series Manuel utilisateur
Hitachi
Hitachi DS225 Instructions d'installation
Hitachi
Hitachi Content Platform S Series Manuel utilisateur
Hitachi
Hitachi Compute Blade 320 Manuel utilisateur
Hitachi
Hitachi Advanced Server HA810 G2 Manuel utilisateur
Hitachi
Hitachi HVM Navigator V03-06 Manuel utilisateur
Hitachi
Hitachi Compute Rack 220S Manuel de la liste des pièces
Hitachi
Hitachi Compute Rack CR 210H Manuel utilisateur
Hitachi
Hitachi Compute Rack 220H Manuel de la liste des pièces
Hitachi
Hitachi Compute Blade 500 Series Manuel utilisateur
Hitachi
Hitachi HCP Anywhere Edge Manuel
Hitachi
Hitachi VSP F1500 Manuel utilisateur
Hitachi
Hitachi HA810 G3 Series Manuel utilisateur
Hitachi
Hitachi DS220 G2 Instructions d'installation
Hitachi
Hitachi UM-S700 Manuel utilisateur
Hitachi
Hitachi BladeSymphony 1000 Manuel utilisateur
