Hitachi ZAXIS 200-3 class Manuel utilisateur

Operational Principle

Technical Manual

PRINTED IN SINGAPORE (YS) 2006.07

ZAXIS200

-3

·225US

-3

·225USR

-3

·240

-3

·270

-3

class HYDRAULIC EXCAVATOR TECHNICAL MANUAL OPERATIONAL PRINCIPLE

Service Manual consists of the following separate Part No;

Technical Manual (Operational Principle) : Vol. No. TO1V1-E

Technical Manual (Troubleshooting) : Vol. No. TT1V1-E

Workshop Manual : Vol. No. W1V1-E

PART NO. TO1V1-E-01

URL:http://www.hitachi-c-m.com

Hydraulic Excavator

200-3 class

200-3•200LC-3•210H-3•210LCH-3•210K-3•210LCK-3•210-3•210LC-3•

210LCN-3•240N-3

225US-3 class

225US-3•225USLC-3

225USR-3 class

225USR-3•225USRLC-3•225USRK-3•225USRLCK-3

240-3 class

240-3•240LC-3•250H-3•250LC-3•250LCN-3•250LCH-3•250K-3•250LCK-3

270-3 class

270-3•270LC-3•280LC-3•280LCN-3

TO1V1-E-01 Zaxis.p65 1/8/06, 15:251

epcatalogs.com

INTRODUCTION

IN-01

TO THE READER

• This manual is written for an experienced technician

to provide technical information needed to maintain

and repair this machine.

• Be sure to thoroughly read this manual for correct

product information and service procedures.

• If you have any questions or comments, at if you

found any errors regarding the contents of this

manual, please contact using “Service Manual

Revision Request Form” at the end of this manual.

(Note: Do not tear off the form. Copy it for us-

age.):

Publications Marketing & Product Support

Hitachi Construction Machinery Co. Ltd.

TEL: 81-298-32-7173

FAX: 81-298-31-1162

ADDITIONAL REFERENCES

• Please refer to the materials listed below in addition

to this manual.

• The Operator’s Manual

• The Parts Catalog

• Operation Manual of the Engine

• Parts Catalog of the Engine

• Hitachi Training Material

MANUAL COMPOSITION

• This manual consists of three portions: the Techni-

cal Manual (Operational Principle), the Technical

Manual (Troubleshooting) and the Workshop Man-

ual.

• Information included in the Technical Manual

(Operational Principle):

technical information needed for redelivery and

delivery, operation and activation of all devices

and systems.

• Information included in the Technical Manual

(Troubleshooting):

technical information needed for operational per-

formance tests, and troubleshooting procedures.

• Information included in the Workshop Manual:

technical information needed for maintenance

and repair of the machine, tools and devices

needed for maintenance and repair, maintenance

standards, and removal/installation and assem-

ble/disassemble procedures.

PAGE NUMBER

• Each page has a number, located on the center

lower part of the page, and each number contains

the following information:

Example : T 1-3-5

Consecutive Page Number for Each Group

Group Number

Section Number

T: Technical Manual W: Workshop Manual

epcatalogs.com

INTRODUCTION

IN-02

SAFETY ALERT SYMBOL AND HEADLINE

NOTATIONS

In this manual, the following safety alert symbol and

signal words are used to alert the reader to the

potential for personal injury of machine damage.

This is the safety alert symbol. When you see this

symbol, be alert to the potential for personal injury.

Never fail to follow the safety instructions prescribed

along with the safety alert symbol.

The safety alert symbol is also used to draw attention

to component/part weights.

To avoid injury and damage, be sure to use appropri-

ate lifting techniques and equipment when lifting heavy

parts.

• CAUTION:

Indicated potentially hazardous situation which could,

if not avoided, result in personal injury or death.

• IMPORTANT:

Indicates a situation which, if not conformed to the

instructions, could result in damage to the machine.

• NOTE:

Indicates supplementary technical information or

know-how.

UNITS USED

• SI Units (International System of Units) are used in

this manual.

MKSA system units and English units are also

indicated in parenthheses just behind SI units.

Example : 24.5 MPa (250 kgf/cm2, 3560 psi)

A table for conversion from SI units to other system

units is shown below for reference purposees.

Quantity To Convert

From Into Multiply By

MPa kgf/cm210.197Pressure

MPa psi 145.0

kW PS 1.360Power

kW HP 1.341

Temperature °C °F °C×1.8+32

km/h mph 0.6214Velocity

min-1 rpm 1.0

Flow rate L/min US gpm 0.2642

mL/rev cc/rev 1.0

Quantity To Convert

From Into Multiply By

mm in 0.03937Length

mm ft 0.003281

L US gal 0.2642

L US qt 1.057

Volume

m3yd31.308

Weight kg lb 2.205

N kgf 0.10197Force

N lbf 0.2248

N⋅m kgf⋅m 1.0197Torque

N⋅m lbf⋅ft 0.7375

epcatalogs.com

SECTION AND GROUP

CONTENTS

TECHNICAL MANUAL

(Operational Principle)

All information, illustrations and speci-

fications in this manual are based on

the latest product information available

at the time of publication. The right is

reserved to make changes at any time

without notice.

Hitachi Construction Machinery Co., Ltd.

Tokyo, Japan

SECTION 1 GENERAL

Group 1 Specification

Group 2 Component Layout

Group 3 Component Specifications

SECTION 2 SYSTEM

Group 1 Controller

Group 2 Control System

Group 3 ECM System

Group 4 Hydraulic System

Group 5 Electrical System

SECTION 3 COMPONENT OPERATION

Group 1 Pump Device

Group 2 Swing Device

Group 3 Control Valve

Group 4 Pilot Valve

Group 5 Travel Device

Group 6 Signal Control Valve

Group 7 Others (Upperstructure)

Group 8 Others (Undercarriage)

TECHNICAL MANUAL (Troubleshooting)

SECTION 4 OPERATIONAL PER-

FORMANCE TEST

Group 1 Introduction

Group 2 Standard

Group 3 Engine Test

Group 4 Excavator Test

Group 5 Component Test

SECTION 5 TROUBLESHOOTING

Group 1 Diagnosing Procedure

Group 2 Monitor Unit

Group 3 Dr. ZX

Group 4 e-Shovel

Group 5 Component Layout

Group 6 Troubleshooting A

Group 7 Troubleshooting B

Group 8 Electrical System Inspection

epcatalogs.com

Buy now

Hitachi Hydraulic Excavator Zaxis 200-3, 225US-3, 225USR-3, 240-3,

270-3 Class Technical Manual PDF

With Instant Download

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Hitachi Excavatrice

Hitachi

Hitachi ZAXIS 850-3 Manuel utilisateur

Hitachi

Hitachi EX80-5 Manuel utilisateur

Hitachi

Hitachi EX550-5 Manuel d'instructions

Hitachi

Hitachi Zaxis 330 Manuel utilisateur

Hitachi

Hitachi ZX 130K-5G Manuel d'instructions

Hitachi

Hitachi ZAXIS 110 Manuel utilisateur

Hitachi

Hitachi EX 8000-6 Manuel d'instructions

Hitachi

Hitachi ZX870LC-5G Manuel d'instructions

Hitachi

Hitachi ZX 870LC-5A Manuel utilisateur

Hitachi

Hitachi ZAXIS 130-6N Manuel utilisateur

Hitachi

Hitachi ZAXIS 330LC Manuel d'instructions

Hitachi

Hitachi EX 3600-6 Manuel utilisateur

Hitachi

Hitachi ZAXIS 650LC-3 Manuel d'instructions

Hitachi

Hitachi EX 3600-6 Manuel utilisateur

Hitachi

Hitachi ZX200-5G Manuel d'instructions

Hitachi

Hitachi EX20UR-2 Manuel utilisateur

Hitachi

Hitachi ZAXIS 135US-5B Manuel utilisateur

Hitachi

Hitachi EX1200-5D Manuel utilisateur

Hitachi

Hitachi ZX 520LCH-5B Manuel utilisateur

Hitachi

Hitachi ZX 110-3 Manuel d'instructions

Hitachi

Hitachi Zaxis 200 Manuel d'instructions

Hitachi

Hitachi ZAXIS 120-3 class Manuel utilisateur

Hitachi

Hitachi ZX 170W-3 Manuel d'instructions

Hitachi

Hitachi EX1200-7 Guide de démarrage rapide

Manuels Excavatrice populaires d'autres marques

Hyundai

Hyundai Robex 210LC-9 Manuel utilisateur

sennebogen

sennebogen 830 E Manuel utilisateur

Topcon

Topcon X-63 Manuel d'utilisation et d'entretien

jcb

jcb 15c-1 Manuel utilisateur

Case

Case CX290B Manuel utilisateur

SUNWARD

SUNWARD SWE155F Manuel

CNH

CNH CX16B Manuel utilisateur

Super Products

Super Products MUD DOG 700 Manuel utilisateur

Komatsu

Komatsu ecot3 WA200-6 Guide d'installation

New Holland

New Holland E57C Manuel utilisateur

Hyundai

Hyundai Robex 160LC-9 Manuel utilisateur

Doosan

Doosan DX180LC Guide d'installation

Hyundai

Hyundai HW65AH Manuel utilisateur

mecalac

mecalac 14 MBX Manuel utilisateur

CASE CONSTRUCTION

CASE CONSTRUCTION CX350C Manuel utilisateur

Hyundai

Hyundai Robex 140LC-9 Manuel utilisateur

Case

Case CX50B Manuel utilisateur

Kobelco

Kobelco SK210LC-9 Guide d'installation