Hirschmann IVISOR mentor QVGA Manuel utilisateur

24 183 19 1012e (Generic) / 2009-02-26 / Rev. 01 / rk.

iVISOR

mentor QVGA

User Manual

Edition 2/2009 Rev. A

The order code for this document is

24 183 19 1012e (Generic)

Contents

General Information

Important Notes /

Warnings

System Description

Configuration Setup

Information Menus

Commissioning /

Service / Maintenance

Troubleshooting

Appendix

24 183 19 1012e (Generic) / 2009-02-26 / Rev. 01 / rk.

TABLE OF CONTENTS

1. General Information ........................................................................... 3

2. Important Notes.................................................................................. 4

3. System Description............................................................................ 5

3.1 System start.......................................................................................... 6

3.2 Displays and Controls .......................................................................... 7

3.3 Status displays ................................................................................... 14

4. Configuration setup (LMI operation mode) ................................... 15

4.1 Interactive operation mode setup....................................................... 15

4.2 Quick adjusting the reeving................................................................ 20

4.3 Adjusting the language....................................................................... 22

4.4 Working area definition system (WADS)............................................23

4.4.1 Radius monitoring .......................................................................... 25

4.4.2 Tip height monitoring...................................................................... 26

4.4.3 Boom angle monitoring .................................................................. 27

4.4.4 Slew angle monitoring.................................................................... 28

4.4.5 Virtual wall monitoring .................................................................... 30

5. Information menus........................................................................... 32

5.1 Overview, LMI values......................................................................... 34

6. Commissioning / Service / Maintenance........................................ 35

6.1 Checks before commissioning...........................................................35

6.2 Service menus.................................................................................... 36

6.3 Maintenance and Service................................................................... 37

7. Troubleshooting............................................................................... 38

7.1 General information............................................................................ 38

7.2 Error code list ..................................................................................... 39

Appendix: Important notes for crane operators ..................................... 45

Introduction

24 183 19 1012e (Generic) / 2009-02-26 / Rev. 01 / rk.

1. GENERAL INFORMATION

This manual describes the functions and operation of the iVISOR mentor QVGA load moment

indicator (LMI).

The purpose of the load moment indicator (below called the LMI) is to provide key information to the

operator of the loader which is needed for the operation of the loader within the operating ranges

specified by the manufacturer. The LMI provides the operator with information about the angle and

height of the boom, working radius, rated load and the actual load.

The iVISOR mentor QVGA load moment indicator comprises a central microprocessor unit with an

integrated display and operating console together with various sensors to record measured values.

The system components are connected via CAN bus.

The system works on the principle of a target / actual comparison. The actual value, resulting from the

pressure and angle measurement, is compared with the target values stored in the central unit’s

memory and analysed by the microprocessor.

If the crane nears its safe load limit, the system will warn the crane operator by means of both

acoustic and optical signals. In addition, as soon as the crane reaches an unauthorized operating

status, all crane movements will be switched off that would increase the load moment on the crane.

The manufacturer reserves the right to modify the contents of this manual without notice. Hirschmann offers no guarantee

whatsoever for this material, including guarantees with reference to commercial availability and suitability for particular

applications. Hirschmann shall not be liable for errors contained herein or for identical or consequential damages in connec-

manual may not be copied, reproduced or translated into another language, neither whole nor in part, without advance

written authorization from Hirschmann..

Introduction

24 183 19 1012e (Generic) / 2009-02-26 / Rev. 01 / rk.

2. IMPORTANT NOTES

The LMI is an operating aid that warns the crane operator of imminent overloading or of the approach

of the hook block to the boom head, in order to avoid possible property damage or injury to personnel.

The device is not, nor is it intended to be, a substitute for good operator judgment and/or experience,

nor does it remove the need for utilizing only recognized safe procedures during crane operations.

The crane operator continues to bear ultimate responsibility for safe operation of the crane.

He must ensure that he fully understands and follows the displayed notes and instructions

in their entirety.

Before beginning crane operations, the crane operator must carefully read and understand

the entire manual in order to ensure that he is aware of the operation and limitations of both

the LMI and the crane itself.

Proper functioning is dependent upon proper daily inspection and observation of the

operating instructions set forth in the manual.

The LMI is not able to provide aid to the crane operator unless it has been properly adjusted

and unless the correct load capacity chart and the correct operating code have been

entered for the respective rigging configuration. The correctness of the LMI settings must

be guaranteed before beginning crane work in order to avoid damage to property and

severe or even fatal injuries to personnel.

This system can be equipped with an external key-operated switch located in the crane

operator's cab. This key-operated switch overrides control lever function switch-off by the

LMI or by the hoist limit switch system. This switch may only be used during emergency

situations, and even then only by authorized personnel. Failure to observe these

instructions could result in damage to property and severe or even fatal injuries to

personnel.

The LMI cannot perform correctly unless it has been properly adjusted. The prerequisite for this is

making conscientious and correct entries during the set-up procedure, in accordance with the actual

configuration of the crane. The correctness of the LMI settings must be ensured before beginning

crane work in order to avoid damage to property and severe or even fatal injuries to personnel.

Introduction

24 183 19 1012e (Generic) / 2009-02-26 / Rev. 01 / rk.

3. SYSTEM DESCRIPTION

The iVISOR mentor QVGA load moment indicator system comprises a central microprocessor unit

with an integrated display and control console together with various sensors to record the measured

values.

Fig. 1: Components of the iVISOR mentor QVGA LMI system (without optional extras)

The system operates on the principle of reference/real comparison. The actual value is compared

with the calculated reference values and evaluated by the system. An overload warning signal is

triggered on the display and operating console once limit values are reached. All crane movements

that increase the load moment are switched off at the same time.

The crane-specific data specified by the manufacturer, such as load capacity charts, boom weights,

centers of gravity and dimensions, are stored in the central data memory. This data is the reference

information used to calculate the operating conditions.

The boom angle and length is measured by means of an length/angle sensor that is mounted on the

boom. The crane load is determined indirectly with the aid of pressure transducers.

The operating console is located in the operator's cab in plain view of the crane operator. All displays

and operating elements have background illumination for enhanced ease of recognition. The console

contains various operating elements as well as a multifunction LC display, all of which are described

in detail in chapter 3.2

The contrast of the LC display is adjustable manually in accordance with ambient light levels.

Introduction

24 183 19 1012e (Generic) / 2009-02-26 / Rev. 01 / rk.

3.1 System start

Upon switching on, the system boots and starts with an automatic test of the LMI system,

lamps and audible alarm. During the test, the LC display shows the start screen.

If the system was turned off for more than two hours, the setup configuration has to be

entered after the system test. (⇒chapter 4)

First, the operating mode is determined by an interactive step-by-step interrogation of the

rigging states.

Next is the interactive input of the reeving.

Now the LC display shows all inputs and awaits acknowledgment or cancelling.

Upon acknowledgment of the inputs the system is ready for operation.

In the event of a malfunction, a corresponding error code "E##" will appear on the Data

display (1). (> refer to error code table)

Introduction

24 183 19 1012e (Generic) / 2009-02-26 / Rev. 01 / rk.

3.2 Displays and controls

The illustration shows the displays and controls of the iVISOR mentor QVGA console. The numbers

in the illustration correspond to the numbers in the following functional description for each item.

1 Data display (background lit)

2 Bar graph (utilisation)

3 Prewarning light

4 Overload warning light (load moment)

5 Hoist limit warning light (A2B)

6 “LMI bypass” warning light (flashes if bypassed)

7 "A2B bypass" warning light (flashes if bypassed)

8 Function keys F1 ... F4

9 “Info" key (system information)

10 System setup button

11 “LIM” button (working area definition)

12 “Tare” button

13 “Alarm off” button

Displays and controls

24 183 19 1012e (Generic) / 2009-02-26 / Rev. 01 / rk.

(1) Data display

The Data display (1) is dot matrix LC display with background illumination and extended temperature

range, on which essential data are displayed depending on the operating mode, such as load values,

geometry and crane data, symbols etc. The design enables good legibility even in bright sunlight,

and at night too thanks to the integrated background lighting.

Examples of display menus (values are not real)

Start after system test Display, normal operation Entry to Info menu

Display of LMI values Entry menu – working area definition Service menu (code-protected)

Pressure sensor adjustment

You can find a detailed description of symbols and displays in the chapters and the appendix of this manual.

Displays and controls

24 183 19 1012e (Generic) / 2009-02-26 / Rev. 01 / rk.

Data display (example w/o man basket):

Notes:

•If required, various symbols are displayed in the “status indication” field (refer to chapter 3.3).

•If required, active working area limits are displayed by the relevant symbols.

The relevant symbol flashes if the limit value is reached or exceeded.

•In the “function key symbols" field, the symbol allocated to the relevant function key appears.

Displays and controls

24 183 19 1012e (Generic) / 2009-02-26 / Rev. 01 / rk.

(2) Utilisation display (bar graph)

The Utilisation display (bar graph) indicates how much of

the admissible load moment (rated moment) is used. As the

rated moment changes constantly during loader operation,

the load moment display also changes constantly.

The utilisation display is marked with differently coloured fields:

green: "Safe” operation (0...90% of rated moment)

yellow: “Prewarning range” (90...100% of rated moment)

red: “Overload range” (> 100% of rated moment)

(3) “Pre-warning” light

When this amber display light comes on, this indicates that

the utilisation of the crane has reached the specified pre-

warning range. An overload situation could therefore be

imminent!

At the same time, the acoustic alarm sounds an interrupted

signal.

For the crane operator, this means that the work can

only be continued with caution.

(4) “Overload” warning light

This red display light lights up to indicate that the maximum

capacity has been reached or exceeded.

At the same time, the acoustic alarm sounds an

uninterrupted signal and, depending on the system wiring,

load moment-increasing boom movements are stopped.

By actuating the key the acoustic alarm can be

suppressed after a minimum 5-second warning.

Autres manuels pour iVISOR mentor QVGA

Table des matières

Autres manuels Hirschmann Écran tactile

Hirschmann

Hirschmann Mentor EI65 Manuel utilisateur

Hirschmann

Hirschmann iVISOR mentor QVGA Manuel utilisateur

Hirschmann

Hirschmann PRS 80 Wind Speed Manuel utilisateur

Hirschmann

Hirschmann MARK 4E/2 Manuel utilisateur

Hirschmann

Hirschmann PAT EI65/0005 Manuel utilisateur

Hirschmann

Hirschmann PAT DS 350GM Manuel de programmation

Hirschmann

Hirschmann PAT DS 160 Manuel utilisateur

Hirschmann

Hirschmann qSCALE maestro Manuel utilisateur

Hirschmann

Hirschmann PAT IFLEX5 Manuel utilisateur

Manuels Écran tactile populaires d'autres marques

FlowLine

FlowLine Data loop Manuel utilisateur

ALPEX

ALPEX AEx-8 P Series Manuel utilisateur

Ltech

Ltech E5S Manuel utilisateur

Harman

Harman AMX MODERO S MSD-701-L2 Manuel utilisateur

Acnodes

Acnodes PC 1150 Manuel utilisateur

AIS

AIS IP10IA99 series Manuel utilisateur

IBASE Technology

IBASE Technology ASTUT-152-RE1S Manuel utilisateur

YASKAWA

YASKAWA TP 610C Manuel utilisateur

B&R

B&R Power Panel C Series Manuel utilisateur

Beijer Electronics

Beijer Electronics X2 control Manuel utilisateur

AXIOMTEK

AXIOMTEK GOT321W-521 Manuel utilisateur

TRIDONIC.ATCO

TRIDONIC.ATCO x-touchBOX Manuel utilisateur

Qomo

Qomo QIT1386 Manuel utilisateur

DFI

DFI KS104-CD Manuel utilisateur

AMX

AMX AXP-PPC Mode d’emploi

Sartorius

Sartorius X3 PR 5410 Manuel utilisateur

AMX

AMX Modero X Series Manuel utilisateur

Advantech

Advantech TPC-30 Series Manuel utilisateur