DSKZL2-12V Safety information
Kappel Flachglastechnik GmbH 2-2
Organisational measures
Always keep the operating instructions within reach at the site of use.
In addition to the operating instructions please observe and teach any other generally
applicable statutory regulations concerning accident prevention.
Such obligations can also include providing and wearing personal protective
equipment.
Please supplement the operating instructions with instructions including supervision
and reporting obligations taking into consideration operational corporate
circumstances, e.g. relating to work organisation, work processes, personnel used.
The personnel authorised to operate the device must read the operating instructions,
particularly the chapter about safety instructions before starting work. It is too late to
read the instructions if work has already been started. This applies in particular to
personnel who only work on the machine occasionally, e.g. for equipping it and
carrying out maintenance work.
Occasional checks should be carried out to ensure that the members of personnel
follow the instructions and work in a safety-conscious manner and are aware of risks.
If necessary or if required by regulations, personal protective equipment should be
used. Glass should only be transported with the appropriate protective equipment
(safety shoes, protective gloves, wrist protectors, helmet etc.) A helmet should be
worn at all times when transporting goods above head height.
All safety and danger instructions on the device should be complied with.
All safety and danger instructions on the device should be kept complete and in
legible condition.
If there are any safety-related changes to the device or its operation, the device
should be stopped immediately and the malfunction should be reported to the
relevant office or person.
No changes, attachments or upgrading work that could possibly impair safety should
be carried out on the machine without the consent of the suppplier. This also applies
to the installation and setting of safety equipment and valves as well as to welding on
load-bearing parts.
Spare parts must fulfill the technical requirements specified by the manufacturer. This
is always guaranteed with original replacement parts.
Vacuum hose lines should be replaced at the specified intervals or at appropriate
intervals, even if there are no recognisable safety defects.
Compulsory deadlines or those specified in the instructions for recurring tests /
inspections should be complied with
Appropriate workshop equipment is absolutely necessary for performing the
maintenance measures.
