*Before operating this transformer, read this manual for proper and safety use.
*Use this transformer under the proper voltage.
*Use in a well-ventilated place.
*This transformer must be place in the clean and dry room and kept away from oil, corrosive gas,
Interference noise, high voltage unit and the like.
*Note the lot number and inspection sheet number.
*Before operation, this transformer must be grounded.
*Spare transformer in order to avoid the unnecessary rotation of driver
*Set the proper overtime for tightening screw to work the reset function of the transformer in
order to avoid the unnecessary rotation of driver.
*If the overtime continues, resolve the cause and re-start the unit.
*When you install the unit, allow some slack for wiring of control terminal or power code.
However, too much slack or unreasonable wiring: ex. binding the power code and signal wires
together will be cause of trouble.
*This unit should be installed in the system where it can be easily seen and removed.
*Whenever the change of I/O setting or replacement of unit, the power code must be unplugged
And confirmed the safety of all systems. All setting must be same before and after replacement.
*Use this transformer only for control the
