HIK VISION UD.6L0201B1015A01 Manuel utilisateur

UD.6L0201B1015A01

5-inch Speed Dome

Quick Guide

5-inch Speed Dome·Quick Guide

Thank you for purchasing our product. If there are any questions, or requests, please do

not hesitate to contact the dealer.

This manual applies to 5-inch speed dome.

This manual may contain several technical incorrect places or printing errors, and the

content is subject to change without notice. The updates will be added to the new

version of this manual. We will readily improve or update the products or procedures

described in the manual.

DISCLAIMER STATEMENT

“Underwriters Laboratories Inc. (“UL”) has not tested the performance or reliability of

the security or signaling aspects of this product. UL has only tested for fire, shock or

casualty hazards as outlined in UL’s Standard(s) for Safety, UL60950-1. UL Certification

does not cover the performance or reliability of the security or signaling aspects of this

product. UL MAKES NO REPRESENTATIONS, WARRANTIES OR CERTIFICATIONS

WHATSOEVER REGARDING THE PERFORMANCE OR RELIABILITY OF ANY SECURITY OR

SIGNALING RELATED FUNCTIONS OF THIS PRODUCT.”

0500001030514

5-inch Speed Dome·Quick Guide

Regulatory Information

FCC Information

FCC compliance: This equipment has been tested and found to comply with the limits

for a digital device, pursuant to part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference when the equipment is

operated in a commercial environment. This equipment generates, uses, and can radiate

radio frequency energy and, if not installed and used in accordance with the instruction

manual, may cause harmful interference to radio communications. Operation of this

equipment in a residential area is likely to cause harmful interference in which case the

user will be required to correct the interference at his own expense.

FCC Conditions

This device complies with part 15 of the FCC Rules. Operation is subject to the following

two conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including interference that may

cause undesired operation

EU Conformity Statement

This product and - if applicable - the supplied accessories too are marked

with "CE" and comply therefore with the applicable harmonized European

standards listed under the Low Voltage Directive 2006/95/EC, the EMC

Directive 2004/108/EC.

2002/96/EC (WEEE directive): Products marked with this symbol cannot be

disposed of as unsorted municipal waste in the European Union. For proper

recycling, return this product to your local supplier upon the purchase of

equivalent new equipment, or dispose of it at designated collection points.

For more information see: www.recyclethis.info.

2006/66/EC (battery directive): This product contains a battery that cannot

be disposed of as unsorted municipal waste in the European Union. See the

product documentation for specific battery information. The battery is

marked with this symbol, which may include lettering to indicate cadmium

(Cd), lead (Pb), or mercury (Hg). For proper recycling, return the battery to

your supplier or to a designated collection point. For more information see:

www.recyclethis.info.

5-inch Speed Dome·Quick Guide

Safety Instruction

These instructions are intended to ensure that user can use the product correctly to

avoid danger or property loss.

The precaution measure is divided into Warnings and Cautions:

Warnings: Neglecting any of the warnings may cause serious injury or death.

Cautions: Neglecting any of the cautions may cause injury or equipment damage.

Warnings

All the electronic operation should be strictly compliance with the electrical safety

regulations, fire prevention regulations and other related regulations in your local

region.

Please use the power adapter, which is provided by normal company. The standard of

the power adapter is 24VAC10% or 12VDC10% (depending on models). The power

consumption cannot be less than the required value.

Do not connect several devices to one power adapter as adapter overload may cause

over-heat or fire hazard.

Please make sure that the power has been disconnected before you wire, install or

dismantle the speed dome.

When the product is installed on wall or ceiling, the device shall be firmly fixed.

If smoke, odors or noise rise from the device, turn off the power at once and unplug

the power cable, and then please contact the service center.

If the product does not work properly, please contact your dealer or the nearest

service center. Never attempt to disassemble the speed dome yourself. (We shall not

assume any responsibility for problems caused by unauthorized repair or

maintenance.)

Cautions

Do not drop the dome or subject it to physical shock, and do not expose it to high

electromagnetism radiation. Avoid the equipment installation on vibrations surface or

places subject to shock (ignorance can cause equipment damage).

Do not place the dome in extremely hot, cold, dusty or damp locations, otherwise fire

or electrical shock will occur. The operating temperature should be -30°C ~ 65°C

(outdoor speed dome) and -10°C ~ 50°C (indoor speed dome).

The dome cover for indoor use shall be kept from rain and moisture.

Warnings Follow

these safeguards to

prevent serious

injury or death.

Cautions Follow these

precautions to prevent

potential injury or

material damage.

5-inch Speed Dome·Quick Guide

Exposing the equipment to direct sun light, low ventilation or heat source such as

heater or radiator is forbidden (ignorance can cause fire danger).

Do not aim the speed dome at the sun or extra bright places. A blooming or smear

may occur otherwise (which is not a malfunction however), and affecting the

endurance of sensor at the same time.

Please use the provided glove when open up the dome cover, avoid direct contact

with the dome cover, because the acidic sweat of the fingers may erode the surface

coating of the dome cover.

Please use a soft and dry cloth when clean inside and outside surfaces of the dome

cover, do not use alkaline detergents.

Please keep all wrappers after unpack them for future use. In case of any failure

occurred, you need to return the speed dome to the factory with the original wrapper.

Transportation without the original wrapper may result in damage on the speed dome

and lead to additional costs.

5-inch Speed Dome·Quick Guide

Table of Contents

1 Overview......................................................................................................6

2 Installation ...................................................................................................7

2.1 Wall Mounting.....................................................................................................7

2.2 In-ceiling Mounting............................................................................................10

2.3 Ceiling Mounting ...............................................................................................12

2.3.1 Removing the In-ceiling Mount....................................................................12

2.3.2 Wiring For Ceiling Mounting Applications.....................................................13

2.3.3 Mounting....................................................................................................14

3 Setting the Dome over the LAN .................................................................. 16

4 Accessing via Web browser ........................................................................ 19

5-inch Speed Dome·Quick Guide

1Overview

Please turn the power off before connect the cables.

The cable interfaces of network speed dome are shown in following figure(left). The

cables are distinguished by different colors. The labels attached on the cables are for

identification.

Figure 1-1 Overview

Table 1-1 Overview

No.

Description

Network Cable

Audio Cable

Alarm Output Cables

Alarm Input Cables

RS-485 Cables

Video Cable

Power Cable

SD Card Slot

Power Indicator

RED AC24V

YELLOW/GREEN

BLACK AC24V

VIEOD

5-inch Speed Dome·Quick Guide

2Installation

Before you start:

Check the package contents and make sure that the device in the package is in good

condition and all the assembly parts are included.

Note: Do not drag the speed dome with its waterproof cables as shown in Figure 2-1,

otherwise the waterproof performance is affected.

Figure 2-1 Do Not Drag the Cables

2.1 Wall Mounting

Note: The long-arm wall mount is taken as the example for following mounting steps.

Steps:

1. Loosen the two lock screws on the both side of the speed dome. Pull the lower dome

to separate it from the back box as shown in Figure 2-2.

2. Remove the protective lens cover, foam and sticker from the dome drive.

Note: Please do not remove the lock screws from the dome.

Figure 2-2 Remove the Lower Dome

Back Box

Lock

Screw

Protective Foam

Lower Dome

Sticker

Lens Cover

5-inch Speed Dome·Quick Guide

3. Align the cuts on the lower dome with the lock screws on the back box to reinstall the

lower dome. Tighten the lock screws.

4. Drill 4 screw holes in the wall according to the holes of the mount, and then insert M8

expansion screws into the mounting holes.

5. Attach the gasket then wall mount to the wall by aligning the 4 screw holes of the

mount with expansion screws on the wall.

6. Secure the wall mount with 4 hex nuts and washers.

Figure 2-3 Secure the Mount

Notes:

For cement wall, you need to use the expansion screw to fix the mount. The mounting

hole of the expansion pipe on the wall should align with the mounting hole on the

mount.

For wooden wall, you can just use the self-tapping screw to fix the mount.

Please make sure that the wall is strong enough to withstand more than 8 times the

weight of the dome and the mount.

7. Apply thread tape to the thread of the pendant adapter and rotate the pendant

adapter to the mount. Secure the pendant adapter to the mount with a set screw.

8. Loosen the lock screws of the adapter, as shown below:

Figure 2-4 Install the Pendant Adapter

Lock Screw

Nuts and

Washers

Expansion Screws

①

②

Pendant Adapter

Top View of the

Pendant Adapter

5-inch Speed Dome·Quick Guide

Note: The dimension of pendant adapter is G11

9. Hook the back box of the speed dome to the mount with the safety rope. Route the

cables through the mount.

10. Align the direction label of pendant adapter with the label of the back box to install

the speed dome. Rotate the back box clockwise tightly. Secure the back box and the

pendant adapter with two lock screws.

Note: Please remove the protective film on the lower dome after the installation is

finished.

Figure 2-5 Align the Direction Label

Figure 2-6 Mount the Dome

Safety Rope

①

Lock

Screw

Labels

②

③

Table des matières

Autres manuels HIK VISION Caméra de sécurité

HIK VISION

HIK VISION UD.6L0201B1907A01 Manuel utilisateur

HIK VISION

HIK VISION DS-MH2311/64G/GLE(C) Manuel utilisateur

HIK VISION

HIK VISION DS-2CD5A46G0-IZ/UH Manuel utilisateur

HIK VISION

HIK VISION DS-2CE59U1T-VPIT3ZF Manuel utilisateur

HIK VISION

HIK VISION DS-2TD2166 Manuel utilisateur

HIK VISION

HIK VISION DS-2CE16D9T-AIRAZH Manuel utilisateur

HIK VISION

HIK VISION IR Network Speed Dome Manuel utilisateur

HIK VISION

HIK VISION DS-2DP0818ZIX Manuel utilisateur

HIK VISION

HIK VISION DS-2CE12KF3T-LE Manuel utilisateur

HIK VISION

HIK VISION DS-2TD2636B-15/P Manuel utilisateur

HIK VISION

HIK VISION U1T Series Manuel utilisateur

HIK VISION

HIK VISION UD.6L0201B1295A01 Guide de l'utilisateur

HIK VISION

HIK VISION DS-2CE16D8T-AIT3ZE Manuel utilisateur

HIK VISION

HIK VISION DS-2TP21B-6AVFW Manuel utilisateur

HIK VISION

HIK VISION iDS-TCV907-BIR Manuel utilisateur

HIK VISION

HIK VISION UD04315B Manuel utilisateur

HIK VISION

HIK VISION iDS-TCM403-AI Manuel utilisateur

HIK VISION

HIK VISION DS-2CE19H8T-IT3ZF Manuel utilisateur

HIK VISION

HIK VISION H1T Series Manuel utilisateur

HIK VISION

HIK VISION TandemVu DS-2SF8C442MXS-DLW-24F0 Manuel utilisateur

HIK VISION

HIK VISION UD.6L0201B2151A02 Manuel utilisateur

HIK VISION

HIK VISION IDS-2CD7546G0-IZHSY 8-32 MM Manuel utilisateur

HIK VISION

HIK VISION Day/ Night Color Camera Manuel utilisateur

HIK VISION

HIK VISION DS-2TD4136T-25 Manuel utilisateur

Manuels Caméra de sécurité populaires d'autres marques

Okina USA

Okina USA SIR36-870VF650LP Manuel utilisateur

Divio

Divio NDR155PA Manuel utilisateur

Canon

Canon VB-C500D Manuel utilisateur

Easy Access

Easy Access EasyGuard Manuel utilisateur

Vivotek

Vivotek FD9389-EHV-v2 Manuel utilisateur

TUYA

TUYA COSMO W2 Manuel utilisateur

Eusso

Eusso UNC7500-IR Guide de configuration

urmet domus

urmet domus 1096/204 Manuel utilisateur

VC VC20 series Manuel utilisateur

Axis

Axis Q1614 Manuel utilisateur

ieGeek

ieGeek DD201 Manuel utilisateur

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuel utilisateur

Vicon

Vicon V662-D-1 Mode d'emploi

Grundig

Grundig GCH-K0274P Manuel utilisateur

Lorex

Lorex VANTAGE LBC7032 Manuel utilisateur

4xem

4xem WPT Manuel utilisateur

Samsung

Samsung SCV-3082 Manuel utilisateur

Vitek

Vitek VTC-C544 Manuel utilisateur