HIK VISION UD07275B Manuel utilisateur

Network Box Camera

Quick Start Guide

UD07275B

Network Box Camera·Quick Start Guide

Quick Start Guide

Any and all information, including, among others, wordings, pictures,

graphs are the properties of Hangzhou Hikvision Digital Technology

Co., Ltd. or its subsidiaries (hereinafter referred to be “Hikvision”).

This user manual (hereinafter referred to be “the Manual”) cannot

be reproduced, changed, translated, or distributed, partially or

wholly, by any means, without the prior written permission of

Hikvision. Unless otherwise stipulated, Hikvision does not make any

warranties, guarantees or representations, express or implied,

regarding to the Manual.

About this Manual

This Manual is applicable to Network Box Camera.

The Manual includes instructions for using and managing the

product. Pictures, charts, images and all other information

hereinafter are for description and explanation only. The

information contained in the Manual is subject to change, without

notice, due to firmware updates or other reasons. Please find the

latest version in the company website

(http://overseas.hikvision.com/en/).

Please use this user manual under the guidance of professionals.

Trademarks Acknowledgement

and other Hikvision’s trademarks and logos are the

properties of Hikvision in various jurisdictions. Other trademarks and

logos mentioned below are the properties of their respective

owners.

Network Box Camera·Quick Start Guide

Legal Disclaimer

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE

PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND

FIRMWARE, IS PROVIDED “AS IS”, WITH ALL FAULTS AND ERRORS,

AND HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED,

INCLUDING WITHOUT LIMITATION, MERCHANTABILITY,

SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR PURPOSE, AND

NON-INFRINGEMENT OF THIRD PARTY. IN NO EVENT WILL

HIKVISION, ITS DIRECTORS, OFFICERS, EMPLOYEES, OR AGENTS BE

LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR

INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR

LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF

DATA OR DOCUMENTATION, IN CONNECTION WITH THE USE OF

THIS PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE

POSSIBILITY OF SUCH DAMAGES.

REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF

PRODUCT SHALL BE WHOLLY AT YOUR OWN RISKS. HIKVISION SHALL

NOT TAKE ANY RESPONSIBILITES FOR ABNORMAL OPERATION,

PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER

ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET

SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY

TECHNICAL SUPPORT IF REQUIRED.

SURVEILLANCE LAWS VARY BY JURISDICTION. PLEASE CHECK ALL

RELEVANT LAWS IN YOUR JURISDICTION BEFORE USING THIS

PRODUCT IN ORDER TO ENSURE THAT YOUR USE CONFORMS THE

APPLICABLE LAW. HIKVISION SHALL NOT BE LIABLE IN THE EVENT

THAT THIS PRODUCT IS USED WITH ILLEGITIMATE PURPOSES.

Network Box Camera·Quick Start Guide

IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE

APPLICABLE LAW, THE LATER PREVAILS.

Regulatory Information

FCC Information

Please take attention that changes or modification not expressly

approved by the party responsible for compliance could void the

user’s authority to operate the equipment.

FCC compliance: This equipment has been tested and found to

comply with the limits for a Class B digital device, pursuant to part

15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference

will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which

can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the

following measures:

—Reorient or relocate the receiving antenna.

—Increase the separation between the equipment and receiver.

—Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected.

—Consult the dealer or an experienced radio/TV technician for help

FCC Conditions

Network Box Camera·Quick Start Guide

This device complies with part 15 of the FCC Rules. Operation is

subject to the following two conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including

interference that may cause undesired operation.

EU Conformity Statement

This product and - if applicable - the supplied

accessories too are marked with "CE" and comply

therefore with the applicable harmonized European

standards listed under the EMC Directive 2014/30/EU, the RoHS

Directive 2011/65/EU.

2012/19/EU (WEEE directive): Products marked

with this symbol cannot be disposed of as unsorted

municipal waste in the European Union. For proper

recycling, return this product to your local supplier

upon the purchase of equivalent new equipment, or dispose of it at

designated collection points. For more information see:

www.recyclethis.info

2006/66/EC (battery directive): This product

contains a battery that cannot be disposed of as

unsorted municipal waste in the European Union.

See the product documentation for specific battery

information. The battery is marked with this symbol,

which may include lettering to indicate cadmium (Cd), lead (Pb), or

mercury (Hg). For proper recycling, return the battery to your

supplier or to a designated collection point. For more information

see: www.recyclethis.info

Network Box Camera·Quick Start Guide

Industry Canada ICES-003 Compliance

This device meets the CAN ICES-3 (B)/NMB-3(B) standards

requirements.

Safety Instruction

These instructions are intended to ensure that user can use the

product correctly to avoid danger or property loss.

The precaution measure is divided into “Warnings” and “Cautions”

Warnings

Serious injury or death may occur if any of the

warnings are neglected.

Cautions

Injury or equipment damage may occur if any of the

cautions are neglected.

Laws and Regulations

The device should be used in compliance with local laws,

electrical safety regulations, and fire prevention regulations.

Transportation

Keep the device in original or similar packaging while

transporting it.

Power Supply

The input voltage should conform to IEC60950-1 standard: SELV

(Safety Extra Low Voltage) and the Limited Power Source. Refer

to the appropriate documentation for detailed information.

DO NOT connect multiple devices to one power adapter,

to avoid over-heating or fire hazards caused by overload.

Make sure the plug is properly connected to the power socket.

Network Box Camera·Quick Start Guide

System Security

The installer and user are responsible for password and security

configuration and its settings.

Battery

Improper use or replacement of the battery may result

in explosion hazard.

Replace with the same or equivalent type only. Dispose of used

batteries in conformance with the local codes.

Maintenance

If the product does not work properly, please contact your

dealer or the nearest service center. We shall not assume any

responsibility for problems caused by unauthorized repair or

maintenance.

A few device components (e.g., electrolytic capacitor) require

regular replacement. The average lifespan varies, so periodic

checking is recommended. Contact your dealer for details.

Cleaning

Please use a soft and dry cloth when clean inside and

outside surfaces of the product cover. Do not use

alkaline detergents.

Using Environment

Make sure the running environment meets the requirement of

the device. The operating temperature shall be -30 °C to 60 °C

(-22°F to 140 °F), and the operating humidity shall be 95% or

less (no condensing).

Network Box Camera·Quick Start Guide

When any laser equipment is in use, make sure that the

device lens is not exposed to the laser beam, or it may

burn out.

Do not expose the device to high electromagnetic radiation or

dusty environments.

For indoor-only device, place it in a dry and well-ventilated

environment.

Do not aim the lens at the sun or any other bright light.

Emergency

If smoke, odor, or noise arises from the device,

immediately turn off the power, unplug the power

cable, and contact the service center.

Time Synchronization

Set up camera time manually for the first time access if the local

time is not synchronized with that of the network. Visit the

camera via Web browse/client software and go to time settings

interface.

0505021070911

Network Box Camera·Quick Start Guide

Table of Contents

1 Appearance Description ..............................................................9

2 Installation ...............................................................................11

2.1 Memory Card Installation .................................................11

2.2 Lens Installation.................................................................12

2.3 CameraMounting...............................................................13

2.3.1 Pendant Mounting .................................................13

2.3.2 Wall Mounting........................................................ 15

2.4 Mounting with Housing ....................................................17

2.5 Zoom and Focus Adjustment ............................................22

3 Setting the Network Camera over the LAN .................................23

Wiring.................................................................................233.1

Activating the Camera .......................................................243.2

Activation via Web Browser ..................................243.2.1

Activation via SADP Software................................ 253.2.2

Modifying the IP Address ..................................................273.3

4 Accessing via Web Browser .......................................................30

5 Operating via Hik-Connect App..................................................32

5.1 Enable Hik-Connect Service on Camera...........................32

Enable Hik-Connect Service via SADP Software... 325.1.1

Enable Hik-Connect Service via Web Browser .....335.1.2

5.2 Hik-Connect Setup.............................................................35

5.3 Adding Camera to Hik-Connect ........................................ 35

5.4 Initializing the Memory Card ............................................ 37

Network Box Camera·Quick Start Guide

1Appearance Description

The overview of the box camera is shown below:

7*8 9 10

OverviewFigure 1-1

Table des matières

Autres manuels HIK VISION Caméra de sécurité

HIK VISION

HIK VISION DS-2CD6D24FWD-IZHS Manuel utilisateur

HIK VISION

HIK VISION DS-2CD2512F-I Guide de l'utilisateur

HIK VISION

HIK VISION DS-2XC6745G0-IZHS Manuel utilisateur

HIK VISION

HIK VISION DS-2XT6645G0-LIZS/C15 Manuel utilisateur

HIK VISION

HIK VISION TURBO HD DS-T116 Manuel utilisateur

HIK VISION

HIK VISION DS-2CC1197P(N)-A(-C) Manuel utilisateur

HIK VISION

HIK VISION TURBO HD DS-2CE16C0T-IT1F Manuel utilisateur

HIK VISION

HIK VISION DS-2CD2332-I Manuel utilisateur

HIK VISION

HIK VISION DS-2AF1-412 Manuel utilisateur

HIK VISION

HIK VISION DS-2TD2636-15 Manuel utilisateur

HIK VISION

HIK VISION HiWatch HWI-B140H-M Manuel utilisateur

HIK VISION

HIK VISION DS-2CD876BF Manuel utilisateur

HIK VISION

HIK VISION Turbo HD D8T Series Manuel utilisateur

HIK VISION

HIK VISION HWI-T241H Manuel utilisateur

HIK VISION

HIK VISION TURBO HD H0T PIR Series Manuel utilisateur

HIK VISION

HIK VISION DS-2CE55C2P Manuel utilisateur

HIK VISION

HIK VISION DS-2TD4137-25/W Manuel utilisateur

HIK VISION

HIK VISION TURBO HD DS-2CE56D(F)7T-IT1 Manuel utilisateur

HIK VISION

HIK VISION DS-PDCM15PF-IR Manuel utilisateur

HIK VISION

HIK VISION TURBO HD TVI-AC334-FD4/FD4-2.8 Manuel utilisateur

HIK VISION

HIK VISION UD04395B-B Manuel utilisateur

HIK VISION

HIK VISION DS-2CE11D0T-PIRL Manuel utilisateur

HIK VISION

HIK VISION DS-2CE12KF3T-LE Manuel utilisateur

HIK VISION

HIK VISION DS-2CE15F5P(N)-VFIR Manuel utilisateur

Manuels Caméra de sécurité populaires d'autres marques

Okina USA

Okina USA SIR36-870VF650LP Manuel utilisateur

Divio

Divio NDR155PA Manuel utilisateur

Canon

Canon VB-C500D Manuel utilisateur

Easy Access

Easy Access EasyGuard Manuel utilisateur

Vivotek

Vivotek FD9389-EHV-v2 Manuel utilisateur

TUYA

TUYA COSMO W2 Manuel utilisateur

Eusso

Eusso UNC7500-IR Guide de configuration

urmet domus

urmet domus 1096/204 Manuel utilisateur

VC VC20 series Manuel utilisateur

Axis

Axis Q1614 Manuel utilisateur

ieGeek

ieGeek DD201 Manuel utilisateur

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuel utilisateur

Vicon

Vicon V662-D-1 Mode d'emploi

Grundig

Grundig GCH-K0274P Manuel utilisateur

Lorex

Lorex VANTAGE LBC7032 Manuel utilisateur

4xem

4xem WPT Manuel utilisateur

Samsung

Samsung SCV-3082 Manuel utilisateur

Vitek

Vitek VTC-C544 Manuel utilisateur