HIK VISION DS-2TD2136-7 Manuel utilisateur

Camera

Thermal Network Bullet Camera

Quick Start Guide

Available from A1 Security Cameras

www.a1securitycameras.com email: [email protected]

Quick Start Guide

Any and all information, including, among others, wordings,

pictures, graphs are the properties of Hangzhou Hikvision

Digital Technology Co., Ltd. or its subsidiaries (hereinafter

referred to be “Hikvision”). This user manual (hereinafter

referred to be “the Manual”) cannot be reproduced, changed,

translated, or distributed, partially or wholly, by any means,

without the prior written permission of Hikvision. Unless

otherwise stipulated, Hikvision does not make any warranties,

guarantees or representations, express or implied, regarding to

the Manual.

About this Manual

This Manual is applicable to Thermal Network Bullet Camera.

The Manual includes instructions for using and managing the

product. Pictures, charts, images and all other information

hereinafter are for description and explanation only. The

information contained in the Manual is subject to change,

without notice, due to firmware updates or other reasons.

Please find the latest version in the company website

(http://overseas.hikvision.com/en/).

Please use this user manual under the guidance of

professionals.

Trademarks Acknowledgement

and other Hikvision’s trademarks and logos are

the properties of Hikvision in various jurisdictions. Other

trademarks and logos mentioned below are the properties of

their respective owners.

Legal Disclaimer

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW,

THE PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE

Available from A1 Security Cameras

www.a1securitycameras.com email: [email protected]

AND FIRMWARE, IS PROVIDED “AS IS”, WITH ALL FAULTS AND

ERRORS, AND HIKVISION MAKES NO WARRANTIES, EXPRESS

OR IMPLIED, INCLUDING WITHOUT LIMITATION,

MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A

PARTICULAR PURPOSE, AND NON-INFRINGEMENT OF THIRD

PARTY. IN NO EVENT WILL HIKVISION, ITS DIRECTORS,

OFFICERS, EMPLOYEES, OR AGENTS BE LIABLE TO YOU FOR

ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT

DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR

LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR

LOSS OF DATA OR DOCUMENTATION, IN CONNECTION WITH

THE USE OF THIS PRODUCT, EVEN IF HIKVISION HAS BEEN

ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE

USE OF PRODUCT SHALL BE WHOLLY AT YOUR OWN RISKS.

HIKVISION SHALL NOT TAKE ANY RESPONSIBILITES FOR

ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER

DAMAGES RESULTING FROM CYBER ATTACK, HACKER

ATTACK, VIRUS INSPECTION, OR OTHER INTERNET SECURITY

RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY

TECHNICAL SUPPORT IF REQUIRED.

SURVEILLANCE LAWS VARY BY JURISDICTION. PLEASE

CHECK ALL RELEVANT LAWS IN YOUR JURISDICTION BEFORE

USING THIS PRODUCT IN ORDER TO ENSURE THAT YOUR USE

CONFORMS THE APPLICABLE LAW. HIKVISION SHALL NOT BE

LIABLE IN THE EVENT THAT THIS PRODUCT IS USED WITH

ILLEGITIMATE PURPOSES.

IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL

AND THE APPLICABLE LAW, THE LATER PREVAILS.

Regulatory Information

FCC Information

Available from A1 Security Cameras

www.a1securitycameras.com email: [email protected]

FCC compliance: This equipment has been tested and found to

comply with the limits for Class A device, pursuant to part 15 of

the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is

operated in a commercial environment. This equipment

generates, uses, and can radiate radio frequency energy and, if

not installed and used in accordance with the instruction

manual, may cause harmful interference to radio

communications. Operation of this equipment in a residential

area is likely to cause harmful interference in which case the

user will be required to correct the interference at his own

expense.

FCC Conditions

This device complies with part 15 of the FCC Rules. Operation is

subject to the following two conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including

interference that may cause undesired operation.

EU Conformity Statement

This product and - if applicable - the supplied

accessories too are marked with "CE" and

comply therefore with the applicable

harmonized European standards listed under the EMC Directive

2014/30/EU, the RoHS Directive 2011/65/EU.

2012/19/EU (WEEE directive): Products marked

with this symbol cannot be disposed of as

unsorted municipal waste in the European

Union. For proper recycling, return this product

Available from A1 Security Cameras

www.a1securitycameras.com email: [email protected]

to your local supplier upon the purchase of equivalent new

equipment, or dispose of it at designated collection points. For

more information see: www.recyclethis.info

2006/66/EC (battery directive): This product

contains a battery that cannot be disposed of

as unsorted municipal waste in the European

Union. See the product documentation for

specific battery information. The battery is

marked with this symbol, which may include lettering to indicate

cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling,

return the battery to your supplier or to a designated collection

point. For more information see: www.recyclethis.info

Industry Canada ICES-003 Compliance

This device meets the CAN ICES-3 (A)/NMB-3(A) standards

requirements.

Safety Instruction

These instructions are intended to ensure that user can use the

product correctly to avoid danger or property loss.

The precaution measure is divided into “Warnings” and

“Cautions”

Warnings: Serious injury or death may occur if any of the

warnings are neglected.

Cautions: Injury or equipment damage may occur if any of the

cautions are neglected.

Available from A1 Security Cameras

www.a1securitycameras.com email: [email protected]

Warnings Follow these

Cautions Follow these

safeguards to prevent

precautions to prevent

serious injury or death.

potential injury or material

damage.

Warnings

● Proper configuration of all passwords and other security

settings is the responsibility of the installer and/or

end-user.

● In the use of the product, you must be in strict compliance

with the electrical safety regulations of the nation and

region. Please refer to technical specifications for detailed

information.

● Input voltage should meet both the SELV (Safety Extra Low

Voltage) and the Limited Power Source with 24 VAC or 12

VDC according to the IEC60950-1 standard. Please refer to

technical specifications for detailed information.

● Do not connect several devices to one power adapter as

adapter overload may cause over-heating or a fire hazard.

● Please make sure that the plug is firmly connected to the

power socket. When the product is mounted on wall or

ceiling, the device shall be firmly fixed.

● If smoke, odor or noise rise from the device, turn off the

power at once and unplug the power cable, and then please

contact the service center.

Cautions

Available from A1 Security Cameras

www.a1securitycameras.com email: [email protected]

● Make sure the power supply voltage is correct before using

the camera.

● Do not drop the camera or subject it to physical shock.

● Do not touch sensor modules with fingers. If cleaning is

necessary, use clean cloth with a bit of ethanol and wipe it

gently. If the camera will not be used for an extended

period, please replace the lens cap to protect the sensor

from dirt.

● Do not aim the camera at the sun or extra bright places.

Blooming or smearing may occur otherwise (which is not a

malfunction), and affect the endurance of sensor at the

same time.

● The sensor may be burned out by a laser beam, so when

any laser equipment is in using, make sure that the surface

of sensor will not be exposed to the laser beam.

● Do not place the camera in extremely hot, cold (the

operating temperature shall be between -40° C ~ 65° C), ,

dusty or damp locations, and do not expose it to high

electromagnetic radiation.

● To avoid heat accumulation, good ventilation is required for

operating environment.

● Keep the camera away from liquid while in use.

● While in delivery, the camera shall be packed in its original

packing, or packing of the same texture.

● Regular part replacement: a few parts (e.g. electrolytic

capacitor) of the equipment shall be replaced regularly

according to their average enduring time. The average time

varies because of differences between operating

environment and using history, so regular checking is

Available from A1 Security Cameras

www.a1securitycameras.com email: [email protected]

recommended for all the users. Please contact with your

dealer for more details.

● Improper use or replacement of the battery may result in

hazard of explosion. Replace with the same or equivalent

type only. Dispose of used batteries according to the

instructions provided by the battery manufacturer.

● If the product does not work properly, please contact your

dealer or the nearest service center. Never attempt to

disassemble the camera yourself. (We shall not assume

any responsibility for problems caused by unauthorized

repair or maintenance.)

05004001070317

Available from A1 Security Cameras

www.a1securitycameras.com email: [email protected]

Table of Contents

1 Appearance Description .............................................................. 9

1.1 Type I Camera Appearance ......................................... 9

1.2 Type II Camera Appearance ...................................... 10

1.3 Cable Description ....................................................... 11

2 Installation .................................................................................. 13

2.1 Memory Card Installation .......................................... 14

2.1.1 Type I Camera Memory Card Installation...... 14

2.1.2 Type II Camera Memory Card Installation..... 15

2.2 Wide Range Coverage for Different Specifications.. 17

2.3 Installing Camera ....................................................... 17

2.3.1 Installing Type I Camera ................................. 17

2.3.2 Installing Type II Camera ................................ 20

Installation of Network Cable Water-proof Jacket .. 24

3 Setting the Network Camera over the LAN ............................. 27

3.1 Wiring .......................................................................... 27

3.2 Activating the Camera................................................ 28

3.2.1 Activation via Web Browser ............................ 28

3.2.2 Activation via SADP Software......................... 29

3.3 Modifying the IP Address........................................... 31

4 Accessing via Web Browser ...................................................... 33

Appendix......................................................................................... 36

Frequently Asked Questions (FAQ).................................. 36

Device Running Error ................................................ 36

Device Upgrading...................................................... 36

Others ........................................................................ 36

Common Material Emissivity Reference ........................ 38

Available from A1 Security Cameras

www.a1securitycameras.com email: [email protected]

1 Appearance Description

There are two kinds of thermal network bullet cameras: Type I

bullet camera, and Type II bullet camera. The appearance

description of two cameras are shown below.

1.1 Type I Camera Appearance

The overview of Type I thermal network bullet camera

and its components are shown below:

Type I Camera Overview

Available from A1 Security Cameras

www.a1securitycameras.com email: [email protected]

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels HIK VISION Caméra de sécurité

HIK VISION

HIK VISION DS-2CZ2182P-WD Manuel utilisateur

HIK VISION

HIK VISION IR Network Speed Dome Manuel utilisateur

HIK VISION

HIK VISION DS-2CD4112F-I Guide de l'utilisateur

HIK VISION

HIK VISION IPC-B220-IZ Manuel utilisateur

HIK VISION

HIK VISION DS-2XS6A25G0-I/CH20S40 Manuel utilisateur

HIK VISION

HIK VISION DS-2CD7A26G0P-IZHS Guide rapide

HIK VISION

HIK VISION Day/ Night Color Camera Manuel utilisateur

HIK VISION

HIK VISION DS-2CD3786G2-IZS Manuel utilisateur

HIK VISION

HIK VISION DS-2CC1181P(N)(-A) Manuel utilisateur

HIK VISION

HIK VISION HWI-T220H Manuel utilisateur

HIK VISION

HIK VISION DS-2TD2 Series Manuel utilisateur

HIK VISION

HIK VISION DS-2CC51A5PN-VF Manuel utilisateur

HIK VISION

HIK VISION DS-2CD3066G2-IS Manuel utilisateur

HIK VISION

HIK VISION DS-2CD2686G2-IZS Manuel utilisateur

HIK VISION

HIK VISION DS-2CD4A26FWD-IZSP Manuel utilisateur

HIK VISION

HIK VISION DS-2CD7126G0-IZS Manuel de l'opérateur

HIK VISION

HIK VISION DS2CD2725FWDIZS Manuel utilisateur

HIK VISION

HIK VISION DS-2XC6142FWD-IS Manuel utilisateur

HIK VISION

HIK VISION Platinum Series Manuel utilisateur

HIK VISION

HIK VISION AE-VC1B11-ISF Manuel utilisateur

HIK VISION

HIK VISION DS-2TD4166T-9 Manuel utilisateur

HIK VISION

HIK VISION DS-2CC11A2P-IR Manuel utilisateur

HIK VISION

HIK VISION DS-2CE16D0T-VFIR3E Manuel utilisateur

HIK VISION

HIK VISION ECI-T24F Series Manuel utilisateur

Manuels Caméra de sécurité populaires d'autres marques

Okina USA

Okina USA SIR36-870VF650LP Manuel utilisateur

Divio

Divio NDR155PA Manuel utilisateur

Canon

Canon VB-C500D Manuel utilisateur

Easy Access

Easy Access EasyGuard Manuel utilisateur

Vivotek

Vivotek FD9389-EHV-v2 Manuel utilisateur

TUYA

TUYA COSMO W2 Manuel utilisateur

Eusso

Eusso UNC7500-IR Guide de configuration

urmet domus

urmet domus 1096/204 Manuel utilisateur

VC VC20 series Manuel utilisateur

Axis

Axis Q1614 Manuel utilisateur

ieGeek

ieGeek DD201 Manuel utilisateur

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuel utilisateur

Vicon

Vicon V662-D-1 Mode d'emploi

Grundig

Grundig GCH-K0274P Manuel utilisateur

Lorex

Lorex VANTAGE LBC7032 Manuel utilisateur

4xem

4xem WPT Manuel utilisateur

Samsung

Samsung SCV-3082 Manuel utilisateur

Vitek

Vitek VTC-C544 Manuel utilisateur