HIK VISION DS-2DF6223-CX Manuel utilisateur

Explosion-proof Dome·Quick Start Guide

Explosion-proof Dome

Quick Start Guide

Explosion-proof Dome·Quick Start Guide

Quick Start Guide

This Manual is the property of Hangzhou Hikvision Digital Technology Co., Ltd. or its

affiliates (hereinafter referred to as “Hikvision”), and it cannot be reproduced, changed,

translated, or distributed, partially or wholly, by any means, without the prior written

permission of Hikvision. Unless otherwise expressly stated herein, Hikvision does not

make any warranties, guarantees or representations, express or implied, regarding to

the Manual, any information contained herein.

About this Manual

The Manual includes instructions for using and managing the Product. Pictures, charts,

images and all other information hereinafter are for description and explanation only.

The information contained in the Manual is subject to change, without notice, due to

firmware updates or other reasons. Please find the latest version of this Manual at the

Hikvision website (http://www.hikvision.com).

Please use this Manual with the guidance and assistance of professionals trained in

supporting the Product.

Trademarks Acknowledgement

and other Hikvision’s trademarks and logos are the properties of

Hikvision in various jurisdictions.

Other trademarks and logos mentioned are the properties of their respective

owners.

LEGAL DISCLAIMER

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE

PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE

PROVIDED “AS IS” AND “WITH ALL FAULTS AND ERRORS”. HIKVISION MAKES NO

WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION,

MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE.

THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKVISION

BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT

DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS,

BUSINESS INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF

DOCUMENTATION, WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING

NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF

THE PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH

DAMAGES OR LOSS.

YOU ACKNOWLEDGE THAT THE NATURE OF INTERNET PROVIDES FOR INHERENT

SECURITY RISKS, AND HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES FOR

ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM

CYBER-ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET SECURITY

RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.

Explosion-proof Dome·Quick Start Guide

iii

YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND

YOU ARE SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE

APPLICABLE LAW. ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A

MANNER THAT DOES NOT INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING

WITHOUT LIMITATION, RIGHTS OF PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR

DATA PROTECTION AND OTHER PRIVACY RIGHTS. YOU SHALL NOT USE THIS PRODUCT

FOR ANY PROHIBITED END-USES, INCLUDING THE DEVELOPMENT OR PRODUCTION OF

WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR PRODUCTION OF CHEMICAL

OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED TO ANY NUCLEAR

EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS

ABUSES.

IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW,

THE LATER PREVAILS.

05060020200731

Explosion-proof Dome·Quick Start Guide

Regulatory Information

FCC Information

Please take attention that changes or modification not expressly approved by the party

responsible for compliance could void the user’s authority to operate the equipment.

FCC compliance: This equipment has been tested and found to comply with the limits

for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference when the

equipment is operated in a commercial environment. This equipment generates, uses,

and can radiate radio frequency energy and, if not installed and used in accordance with

the instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful interference

in which case the user will be required to correct the interference at his own expense.

FCC Conditions

This device complies with part 15 of the FCC Rules. Operation is subject to the following

two conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including interference that may

cause undesired operation.

EU Conformity Statement

This product and - if applicable - the supplied accessories too are marked

with "CE" and comply therefore with the applicable harmonized European

standards listed under the EMC Directive 2014/30/EU, the RoHS Directive

2011/65/EU and the ATEX Directive 2014/34/EU.

2012/19/EU (WEEE directive): Products marked with this symbol cannot be

disposed of as unsorted municipal waste in the European Union. For proper

recycling, return this product to your local supplier upon the purchase of

equivalent new equipment, or dispose of it at designated collection points.

For more information see: www.recyclethis.info.

2006/66/EC (battery directive): This product contains a battery that cannot

be disposed of as unsorted municipal waste in the European Union. See the

product documentation for specific battery information. The battery is

marked with this symbol, which may include lettering to indicate cadmium

(Cd), lead (Pb), or mercury (Hg). For proper recycling, return the battery to your supplier

or to a designated collection point. For more information see: www.recyclethis.info.

Industry Canada ICES-003 Compliance

This device meets the CAN ICES-3 (A)/NMB-3(A) standards requirements.

Warning:

This is a class A product. In a domestic environment this product may cause radio

inter-ference in which case the user may be required to take adequate measures.

Intended Use of the Dome

Explosion-proof Dome·Quick Start Guide

ATEX: II 2GD Ex db IIC T6 Gb /Ex tb IIIC T80℃Db IP68

IECEx: Ex db IIC T6 Gb /Ex tb IIIC T80℃Db IP68

Hazardous Area Classification: Zone 1, Zone 2, Zone 21, Zone 22

IP Degree: IP68 (2m, 2h)

Ex Standards:

IEC 60079-0: 2011 EN 60079-0: 2012

IEC 60079-1: 2014 EN 60079-1: 2014

IEC 60079-31: 2013 EN 60079-31: 2014

Special Conditions for Safe Use

1. Ambient temperature: -40°C - +60°C

2. DO NOT OPEN WHEN ENERGIZED

3. POTENTIAL ELECTROSTATIC CHARGING HAZARD –SEE INSTRUCTIONS

4. When assembly, operation and maintenance, the operator must follow the

requirements of the IEC 60079-14: latest version Explosive atmospheres- Part 14:

Electrical installations design, selection and erection, beside of the manufacturer’s

operating instructions or its National equivalent.

5. Repair and overhaul shall comply with IEC 60079-19: latest version or its National

equivalent.

Explosion-proof Dome Nameplate

Explosion-proof Dome

WARNING: DO NOT OPEN WHEN ENERGIZED

CAUTION : USE FASTENERS WITH YIELD

STRENGTH ≥450MPa

POTENTIAL ELECTROSTATIC CHARGING

HAZARD-SEE INSTRUCTIONS

Explosion-proof Dome·Quick Start Guide

Safety Instruction

These instructions are intended to ensure that user can use the product correctly to

avoid danger or property loss.

The precaution measure is divided into Warnings and Cautions:

Warnings: Neglecting any of the warnings may cause serious injury or death.

Cautions: Neglecting any of the cautions may cause injury or equipment damage.

Warnings

Grounding: The both internal and external earthing shall be connected reliably.

All the electronic operation should be strictly compliance with the electrical safety

regulations, fire prevention regulations and other related regulations in your local

region.

Make sure that the power has been disconnected before you wire, install or

disassemble the speed dome. Never wire, install or disassemble the speed dome in

explosive environment.

To avoid fire danger caused by electrostatic charge, never touch or wipe the speed

dome in explosive environment. Perform the wiping and replacing accessories only

under non-explosive environment with the provided glove.

When the speed dome is installed on wall or ceiling, the device shall be firmly fixed.

If smoke, odors or noise rise from the speed dome, turn off the power at once and

unplug the power cable, and then contact the service center.

If the speed dome does not work properly, contact your dealer or the nearest

service center. Never attempt to disassemble the speed dome yourself. (We shall not

assume any responsibility for problems caused by unauthorized repair or

maintenance.)

Cautions

If the camera fails to synchronize local time with that of the network, you need to

set up camera time manually. Visit the camera (via web browser or client software)

and enter system settings interface for time settings.

Warnings Follow

these safeguards to

prevent serious

injury or death.

Cautions Follow these

precautions to prevent

potential injury or

material damage.

Explosion-proof Dome·Quick Start Guide

vii

Do not drop the speed dome or subject it to physical shock, and do not expose it to

high electromagnetism radiation. Avoid installation on vibrations surface or places

subject to shock (ignorance can cause device damage).

To ensure explosion-proof performance, do not damage explosion-proof surface.

Do not place the speed dome in extremely hot (refer to the specification of the

device for the detailed operating temperature), cold, dusty or damp locations, and

do not expose it to high electromagnetic radiation.

The dome cover for indoor use shall be kept from rain and moisture.

Exposing the speed dome to direct sun light, low ventilation or heat source such as

heater or radiator is forbidden (ignorance can cause fire danger).

Do not aim the speed dome at the sun or extra bright places. A blooming or smear

may occur otherwise (which is not a malfunction however), and affecting the

endurance of sensor at the same time.

Use the provided glove when open up the dome cover, and avoid direct contact with

the dome cover, because the acidic sweat of the fingers may erode the surface

coating of the dome cover.

To prevent accumulation of electrostatic charge, use a soft and damp cloth when

clean inside and outside surfaces of the bubble. Do not use alkaline detergents.

Keep all wrappers after unpack them for future use. In case of any failure occurred,

you need to return the speed dome to the factory with the original wrapper.

Transportation without the original wrapper may result in damage on the speed

dome and lead to additional costs.

This equipment is not suitable for use in locations where children are likely to be

present.

Do not dispose of the battery into fire or a hot oven, or mechanically crush or cut

the battery, which may result in an explosion.

Do not leave the battery in an extremely high temperature surrounding environment,

which may result in an explosion or the leakage of flammable liquid or gas.

Do not subject the battery to extremely low air pressure, which may result in an

explosion or the leakage of flammable liquid or gas.

Improper use or replacement of the battery may result in hazard of explosion.

Replace with the same or equivalent type only. Dispose of used batteries according

to the instructions provided by the battery manufacturer.

L’utilisation ou le remplacement inadéquats de la pile peuvent entraîner un risque

d’explosion. Remplacez-la par le même type ou l’équivalent du même type

seulement. Jetez les piles usagées conformément aux directives fournies par le

fabricant de la pile.

Ex 
Explosion-proof Dome·Quick Start Guide 
 
viii 
Table of Contents 
Overview......................................................................................................1 
1 Explosion-proof Dome Overview ..........................................................................1 
2 Explanation of model naming...............................................................................1 
3 Power Supply ......................................................................................................2 
4 Explosion-proof Parameters .................................................................................2 
5 Mechanical Specification .....................................................................................2 
6 Working Environment ..........................................................................................2 
Installation ................................................................................................... 3 
1 Preparation .........................................................................................................3 
1.1 Basic Requirement.........................................................................................3 
1.2 Checking Installing Environment ....................................................................3 
1.3 Preparing Cables ...........................................................................................3 
1.4 Preparing Tools..............................................................................................3 
1.5 Original Packaging .........................................................................................3 
1.6 Run the Device in Safe Area ...........................................................................3 
2 Cable Description and Routing .............................................................................5 
3 Installing the Explosion-proof Dome.....................................................................6 
3.1 Disconnecting the Cables...............................................................................6 
3.2 Wall Mounting ..............................................................................................7 
3.3 Pendant Mounting ........................................................................................9 
3.4 Cable Entry Installation................................................................................12 
4 Protective Measures for Outdoor Installation .....................................................13 
Setting the Speed Dome over the LAN........................................................ 14 
1 Wiring...............................................................................................................14 
2 Activating the Speed Dome................................................................................14 
2.1 Activation via Web Browser .........................................................................15 
2.2 Activation via SADP Software.......................................................................16 
3 Modifying the IP Address ...................................................................................17 
Accessing via Web Browser ........................................................................ 18 
 

Explosion-proof Dome·Quick Start Guide

1Overview

1.1 Explosion-proof Dome Overview

The explosion-proof dome captures high quality colored images in dim light

environment with its low illumination and offers more details over expansive areas.

It is equipped with explosion-proof enclosure made of stainless steel. It can be widely

used in places such as: port, wharf, petrochemical industry, military industry.

Refer to Figure 1-1 for explosion-proof dome overview.

Figure 1-1 Explosion-proof Dome Overview

1.2 Explanation of model naming

The product can be named by rules of Figure 1-2 and Figure 1-3.

Figure 1-2 Product Naming Rule 1

Explosion-proof Dome·Quick Start Guide

Figure 1-3 Product Naming Rule 2

1.3 Power Supply

For detailed information about the power supply, refer to Explosion-proof Dome

Nameplate.

1.4 Explosion-proof Parameters

For detailed information about explosion-proof parameters, refer to Explosion-proof

Dome Nameplate.

1.5 Mechanical Specification

Material: 304/316L Stainless Steel.

Cable outlet: One G 3/4 explosion-proof cable outlet, inner hole diameter Φ15.

1.6 Working Environment

Altitude (Above sea level): Within 2000m.

Humidity: Within 95%.

Temperature: Refer to Explosion-proof Dome Nameplate.

Note:

To ensure safety of the users and explosion-proof performance of the speed dome, your

installation environment must meet the installation requirements of the speed dome

you purchased.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels HIK VISION Caméra de sécurité

HIK VISION

HIK VISION DS-2CE71D0T-PIRL Manuel utilisateur

HIK VISION

HIK VISION Platinum Series Manuel utilisateur

HIK VISION

HIK VISION Turbo HD D8T Series Manuel utilisateur

HIK VISION

HIK VISION DS-2CD8153F-E Manuel utilisateur

HIK VISION

HIK VISION TurboHD DS-2CE56D7T-IT Z Series Manuel utilisateur

HIK VISION

HIK VISION iDS-2CD71G0-IZS Series Manuel utilisateur

HIK VISION

HIK VISION DS-2CD2443G0-IW Series Manuel utilisateur

HIK VISION

HIK VISION NETWORK CAMERA Manuel utilisateur

HIK VISION

HIK VISION TURBO HD H5T Series Manuel utilisateur

HIK VISION

HIK VISION HWI-T220H Manuel utilisateur

HIK VISION

HIK VISION DS-2DE5425IWG-K/4G Manuel utilisateur

HIK VISION

HIK VISION DS-2CC5181P-VPIR Manuel utilisateur

HIK VISION

HIK VISION DS-2CD1001-I Manuel utilisateur

HIK VISION

HIK VISION DS-2TD8167-190ZE2F/W Manuel utilisateur

HIK VISION

HIK VISION DS-2CE5512P(N) Manuel utilisateur

HIK VISION

HIK VISION TURBO HD C5T Series Manuel utilisateur

HIK VISION

HIK VISION DS-2CD5526G0-IZHS Manuel utilisateur

HIK VISION

HIK VISION HWI-T621H-Z Manuel utilisateur

HIK VISION

HIK VISION TURBO HD TVI-AC334-FD4/FD4-2.8 Manuel utilisateur

HIK VISION

HIK VISION DS-2CD6445G1 Series Manuel utilisateur

HIK VISION

HIK VISION DS-2CE11D0T-PIRLP Manuel utilisateur

HIK VISION

HIK VISION DS-2CD7A26G0/P-IZHSWG Manuel utilisateur

HIK VISION

HIK VISION DS-2CE10HFT-F Manuel utilisateur

HIK VISION

HIK VISION IR Network Speed Dome Manuel utilisateur

Manuels Caméra de sécurité populaires d'autres marques

Okina USA

Okina USA SIR36-870VF650LP Manuel utilisateur

Divio

Divio NDR155PA Manuel utilisateur

Canon

Canon VB-C500D Manuel utilisateur

Easy Access

Easy Access EasyGuard Manuel utilisateur

Vivotek

Vivotek FD9389-EHV-v2 Manuel utilisateur

TUYA

TUYA COSMO W2 Manuel utilisateur

Eusso

Eusso UNC7500-IR Guide de configuration

urmet domus

urmet domus 1096/204 Manuel utilisateur

VC VC20 series Manuel utilisateur

Axis

Axis Q1614 Manuel utilisateur

ieGeek

ieGeek DD201 Manuel utilisateur

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuel utilisateur

Vicon

Vicon V662-D-1 Mode d'emploi

Grundig

Grundig GCH-K0274P Manuel utilisateur

Lorex

Lorex VANTAGE LBC7032 Manuel utilisateur

4xem

4xem WPT Manuel utilisateur

Samsung

Samsung SCV-3082 Manuel utilisateur

Vitek

Vitek VTC-C544 Manuel utilisateur