HIK VISION DS-2CD6D82G0-IHS Manuel utilisateur
Mobile Network Camera
Quick Start Guide
Quick Start Guide
© 2019 Hangzhou Hikvision Digital Technology Co., Ltd. All rights re-
served.
This Manual is the property of Hangzhou Hikvision Digital Technology Co.,
Ltd. or its aliates (hereinaer referred to as “Hikvision”), and it cannot
be reproduced, changed, translated, or distributed, parally or wholly, by
any means, without the prior wrien permission of Hikvision. Unless oth-
erwise expressly stated herein, Hikvision does not make any warranties,
guarantees or representaons, express or implied, regarding to the Manu-
al, any informaon contained herein.
About this Manual
The Manual includes instructions for using and managing the Product.
Pictures, charts, images and all other informaon hereinaer are for de-
scripon and explanaon only. The informaon contained in the Manual is
subject to change, without noce, due to rmware updates or other rea-
sons. Please nd the latest version of this Manual at the Hikvision website
(hp://www.hikvision.com/en/).
Please use this Manual with the guidance and assistance of professionals
trained in supporng the Product.
Trademarks Acknowledgement
and other Hikvision’s trademarks and logos are the
properes of Hikvision in various jurisdicons. Other trademarks and lo-
gos menoned below are the properes of their respecve owners.
LEGAL DISCLAIMER
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANU-
AL AND THE PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND
FIRMWARE, ARE PROVIDED “AS IS” AND “WITH ALL FAULTS AND ERRORS”.
HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR
FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU
IS AT YOUR OWN RISK. IN NO EVENT WILL HIKVISION BE LIABLE TO YOU
FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAM-
AGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS
PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF
SYSTEMS, OR LOSS OF DOCUMENTATION, WHETHER BASED ON BREACH
OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR
OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF
HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR
LOSS.
YOU ACKNOWLEDGE THAT THE NATURE OF INTERNET PROVIDES FOR IN-
HERENT SECURITY RISKS, AND HIKVISION SHALL NOT TAKE ANY RESPON-
SIBILITIES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER
DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK, VIRUS IN-
SPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION
WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.
YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE
LAWS, AND YOU ARE SOLELY RESPONSIBLE FOR ENSURING THAT YOUR
USE CONFORMS TO THE APPLICABLE LAW. ESPECIALLY, YOU ARE RESPON-
SIBLE, FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT INFRINGE
ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION,
RIGHTS OF PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PRO-
TECTION AND OTHER PRIVACY RIGHTS. YOU SHALL NOT USE THIS PROD-
UCT FOR ANY PROHIBITED END-USES, INCLUDING THE DEVELOPMENT OR
PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT
OR PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVI-
TIES IN THE CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE
NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS ABUSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE AP-
PLICABLE LAW, THE LATER PREVAILS.
Regulatory Informaon
FCC Informaon
Please take aenon that changes or modicaon not expressly approved by
the party responsible for compliance could void the user’s authority to oper-
ate the equipment.
FCC compliance: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residenal installaon. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in accor-
dance with the instrucons, may cause harmful interference to radio commu-
nicaons. However, there is no guarantee that interference will not occur in
a parcular installaon. If this equipment does cause harmful interference to
radio or television recepon, which can be determined by turning the equip-
ment o and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separaon between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help
FCC condions
This device complies with part 15 of the FCC Rules. Operaon is subject to the
following two condions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference
that may cause undesired operaon.
EU Conformity Statement
This product and - if applicable - the supplied accessories too
are marked with "CE" and comply therefore withthe applicable
harmonized European standards listed under the the EMC
Directive 2014/30/EU, the RoHS Directive 2011/65/EU.
2012/19/EU (WEEE directive): Products marked with this
symbol cannot be disposed of as unsorted municipal waste in
the European Union. For proper recycling, return this product
to your local supplier upon the purchase of equivalent new
equipment, or dispose of it at designated collection points. For
more information see: www.recyclethis.info
2006/66/EC and its amendment 2013/56/EU (battery directive):
This product contains a battery that cannot be disposed of
as unsorted municipal waste in the European Union. See the
product documentation for specific battery information. The
battery is marked with this symbol, which may include lettering
to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For
proper recycling, return the battery to your supplier or to a
designated collection point. For more information see: www.
recyclethis.info.
Industry Canada ICES-003 Compliance
This device meets the CAN ICES-3 (B)/NMB-3(B) standards requirements.
Safety Instrucon
These instrucons are intended to ensure that the user can use
the product correctly to avoid danger or property loss.
Laws and Regulaons
The device should be used in compliance with local laws,
electrical safety regulations, and fire prevention regulations.
Transportaon
Keep the device in original or similar packaging while
transporting it.
Power Supply
The input voltage should conform to IEC60950-1 standard: SELV
(Safety Extra Low Voltage) and the LPS (Limited Power Source).
Refer to the appropriate documentation for detailed information.
DO NOT connect multiple devices to one power adapter, to avoid
over-heating or fire hazards caused by overload.
Make sure the plug is properly connected to the power socket.
System Security
The installer and user are responsible for password and security
configuration and its settings.
Baery
Improper use or replacement of the battery may result in
explosion hazard. Replace with the same or equivalent type only.
Dispose of used batteries in conformance with the local codes.
L’utilisation ou le remplacement inadéquats de la pile peuvent
entraîner un risque d’explosion. Remplacez-la par le même type
ou l’équivalent du même type seulement. Jetez les piles usagées
conformément aux directives fournies par le fabricant de la pile.
Maintenance
If the product does not work properly, please contact your
dealer or the nearest service center. We shall not assume any
responsibility for problems caused by unauthorized repair or
maintenance.
A few device components (e.g., electrolytic capacitor) require
regular replacement. The average lifespan varies, so periodic
checking is recommended. Contact your dealer for details.
Cleaning
Please use a soft and dry cloth when clean inside and outside
surfaces of the product cover. Do not use alkaline detergents.
Using Environment
When any laser equipment is in use, make sure that the device
lens is not exposed to the laser beam, or it may burn out.
Do not expose the device to high electromagnetic radiation or
dusty environments.
For indoor-only device, place it in a dry and well-ventilated
environment.
Do not aim the lens at the sun or any other bright light.
Make sure the running environment meets the requirement of
the device. The operating temperature shall be -30 °C to 60 °C
(-22°F to 140 °F) or -40 °C to 60 °C (-40°F to 140 °F) , and the
operating humidity shall be 95% or less (no condensing).
Do not place the camera in extremely hot, cold, dusty or damp
locations, and do not expose it to high electromagnetic radiation.
Emergency
If smoke, odor, or noise arises from the device, immediately turn
off the power, unplug the power cable, and contact the service
center.
Time Synchronizaon
Set up camera time manually for the first time access if the
local time is not synchronized with that of the network. Visit the
camera via Web browse/client software and go to time settings
interface.
Installaon
Make sure the device is firmly secured to any wall or ceiling
mountings.
Be sure that there is enough space to install the camera and
accessories.
Make sure that the device in the package is in good condition
and all the assembly parts are included.
Make sure that the wall is strong enough to withstand at least 4
times the weight of the camera and the mount.
The standard power supply is 12 VDC, please make sure your
power supply matches with your camera.
Make sure that the power has been disconnected before you
wire, install, or disassemble the device.
Make sure that no reflective surface is too close to the camera
lens. The IR light from the camera may reflect back into the lens
causing reflection.
For device with this sticker, this device is intended
for installation in a restricted access location,
access can only be gained by service persons or by
users who have been instructed about the reasons for the
restrictions applied to the location and about any precautions
that shall be taken.
Symbols and Marks
Notice
Warning
Forbidden
Correct
Incorrect
Turn to page A and continue.
i. Not necessarily included accessory.
ii. Variable accessory amount.
iii. Skip this step if not required.
MicroSD card
Grounding
Disposal
Purchase separately
Other situations
Other situations omitted
Waterproof
Skip this step if not necessary
1
Installation
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels HIK VISION Caméra de sécurité
HIK VISION
HIK VISION Ezviz ez360 Series Manuel utilisateur
HIK VISION
HIK VISION DS-2CE56D8T-IT1 Manuel utilisateur
HIK VISION
HIK VISION DS-2CD2112 Guide de l'utilisateur
HIK VISION
HIK VISION iDS-TCM403-B/0832 Feuille d'instructions
HIK VISION
HIK VISION E-series Manuel utilisateur
HIK VISION
HIK VISION DS-2CC1181P(N)(-A) Manuel utilisateur
HIK VISION
HIK VISION DS-2XC6224G0-L Manuel utilisateur
HIK VISION
HIK VISION DS-2SE7C43C432MW-AEB Manuel utilisateur
HIK VISION
HIK VISION DS-2CE16C2T-IR Manuel utilisateur
HIK VISION
HIK VISION DS-2CC5192P(N) Manuel utilisateur
HIK VISION
HIK VISION DS-2CD6412FWD-20 Guide de l'utilisateur
HIK VISION
HIK VISION DS-2CE19H8T-IT3ZF Manuel utilisateur
HIK VISION
HIK VISION DS-2CD2345G0P-I Manuel utilisateur
HIK VISION
HIK VISION DS-2DF5284-A Manuel utilisateur
HIK VISION
HIK VISION PanoVu DS-2PT3306IZ-DE3 Manuel utilisateur
HIK VISION
HIK VISION DS-2TD2667-35/PY Manuel utilisateur
HIK VISION
HIK VISION TURBO HD DS-2CE5AD0T-VPIT3F Manuel utilisateur
HIK VISION
HIK VISION DS-2CE11D8T-PIRL Manuel utilisateur
HIK VISION
HIK VISION DS-2XT6645G0-LIZS/C15 Manuel utilisateur
HIK VISION
HIK VISION DS-2TD2137T-7/P Manuel utilisateur
