HIK VISION DS-1004KI Manuel utilisateur
User Manual of DS-1004KI Keyboard
V1.1.0
User Manual of the DS-1004K keyboard 1
Preventive and Cautionary Ti s
Before connecting and operating your keyboard, please be ad ised of the following tips:
Ensure unit is placed in a well- entilated, dust-free en ironment.
Keep all liquids away from the keyboard.
Please check the power supply to a oid the damage caused by oltage mismatch.
Please make sure the keyboard work in the allowed range of temperature and humidity.
Please keep the de ice horizontal and a oid the installation under se ere ibration en ironment.
The dust board will cause a short circuit after damping. Please dedust regularly for the board, connector, and chassis fan with
brush.
User Manual of the DS-1004K keyboard 2
Contents
Chapter 1 Product O er iew ......................................................................................................................................................... 3
Chapter 2 De ice Appearance ....................................................................................................................................................... 5
2.1 Rear Panel Description ................................................................................................................................................. 5
2.2 Front Panel Description ................................................................................................................................................ 6
2.3 Joystick Function .......................................................................................................................................................... 7
2.4 Typical Wiring Methods ............................................................................................................................................... 8
Chapter 3 Keyboard Operation .................................................................................................................................................... 13
3.1 Controlling DVR by Keyboard ................................................................................................................................... 13
Setting the Keyboard Parameters to Control DVR ........................................................................................................... 13
Operating DVR by Keyboard ........................................................................................................................................... 14
3.2 Controlling Dome Cameras by Keyboard ................................................................................................................... 16
Setting the Keyboard Parameters to Control Dome Camera ............................................................................................ 16
Dome Camera Control Operation .................................................................................................................................... 17
3.3 Controlling the VMS by Keyboard ............................................................................................................................. 18
Setting the Keyboard Parameters to Control VMS........................................................................................................... 18
VMS Control Operation ................................................................................................................................................... 18
3.4 Controlling the Analog Matrix by Keyboard .............................................................................................................. 20
Setting the Keyboard Parameters to Control Analog Matrix ............................................................................................ 20
Analog Matrix Controlling Operation .............................................................................................................................. 20
Appendix 1：Specification .............................................................................................................................................................. 21
User Manual of the DS-1004K keyboard 3
Cha ter 1 Product Overview
DS-1004KI keyboard can be used to control the DVR, the analog dome, the ideo management platform and the analog matrix. The
keyboard is featured in its steady and friendly operation.
Multi le Controlling Modes
The keyboard controls the DVR, Dome Camera, VMS and Analog Matrix.
Controlling modes determine the de ices controlled by the keyboard; e.g. if you choose the control mode as DVR, all the commands
and the controlling signal will be applied to the DVR. The controlling mode of the DS-1004KI keyboard can be shifted by pressing the
MODE button on the panel.
Figure 1-1 Mode Buttons
DVR controlling：The keyboard can fulfill the complete function of the front panel operation of the DVR. And there are
LED screen displays for all the operation. One keyboard can connect to 128 DVRs and the address code of the DVR ranges
from 0 to 255.
Analog Dome Controlling ：The keyboard controls the PTZ function of the analog domes, the address code of the dome
ranges from 0 to 255. A maximum 128 analog domes can be connected.
VMS Controlling: The keyboard controls the ideo management platform, the TV wall switching and display, PTZ
parameters setting and PTZ controlling.
Analog Matrix Controlling: Control the signal input and output switch in the analog matrix.
Multi le Working Modes
The working modes are chosen by turning the key on the front panel. See the figure below.
Figure 1-2 Turning the Key to Change Working Mode
User Manual of the DS-1004K keyboard 4
MENU: Keyboard Configuration Mode. Turn the key to the MENU. Set the keyboard parameters, such as the keyboard
address, the RS-485 parameters and the RS-232 parameters.
OPERATE: Keyboard Operation Mode. Turn the key to OPERATE. Under this mode, the keyboard can control the DVR,
PTZ of the dome camera and the matrix.
PROGRAM: Keyboard Function Settings Mode. Turn the key to PROGRAM. Under this mode, the keyboard can set the
parameters for preset, pattern and patrol.
Protocols
There are 63 protocols of the PTZ control of dome camera, and the main protocols are HIKVISION, PELCO-P, PELCO-D,
SAMSUNG, YAAN-1, SONY, SIEMENS, DRAGON, NAIJIE, KALATEL, VICON and etc..
The control protocols for the analog matrix are ZT-1.0, ZT-2.0, EXTRON, and CREATOR.
Cascade Connection
DS-1004KI pro ides the cascade connection, and 16 auxiliary keyboards are connectable. The address of the auxiliary keyboard
ranges from 0 to 255.
Other Features
The keyboard can set different RS485 parameters such as the protocol and the Baudrate, which enables the flexible parallel
connection to different de ices.
The con enient key locking function ensures the security of operation.
The keyboard integrates multiple control functions as the controlling of DVR, analog dome cameras and matrix. It can be
used in the complex sur eillance system.
LED panel display is pro ided.
User Manual of the DS-1004K keyboard 5
Cha ter 2 Device A earance
2.1 Rear Panel Descri tion
Figure 2-1 The Rear Panel of DS-1004KI Keyboard
Notes ：
The green end with a G identifier on the rear panel is for grounding.
Number Physical Interfaces Description
1 Grounding The pillar for grounding.
2 PTZ-CON
(PTZ Control Signal Output)
As main keyboard: Connect the dome camera or the RS485 of the PTZ: TA
connects to RS485+, and TB connects to RS485-.
As auxiliary keyboard: Connect the PTZ-AUX interface of the upper le el
keyboard: TA connects to RA and TB connects to RB.
3 DVR/MATRIX-CON1
(DVR Control Signal Output)
As main keyboard: Connect the DVR KB interface; TA connects D+，TB
connects D-; When connecting the RS-485 of the VMS: TA connects to the 6th pin
and TB connects to 5th pin. When using the RS-485-to-RS-232 interface: TA
connects to 4th pin and TB connects to 3rd pin.
As auxiliary keyboard: Connect the AUX2 interface of the upper le el keyboard.
TA connects to RA and TB connects to RB.
4 DVR/MATRIX-CON2
(Control Signal Output)
Output the RS-485 signal recei ed by the 9th interface identified in the figure
abo e (AUX 1 interface).
5 RS232 Serial Interface For the keyboard firmware upgrading and the control interface for the analog
matrix.
6 Power Supply 12VDC
7 Power Switch Power on/ off
8
PTZ-AUX
(Auxiliary keyboard PTZ
control signal input)
Connect to the lower le el PTZ-CON interface; RA connects to TA and RB
connects to TB.
9
DVR/MATRIX-AUX1
(Auxiliary keyboard DVR
control signal input)
Connect a RS-485 signal source to recei e the RS-485 signal.
10
DVR/MATRIX-AUX2
(Auxiliary keyboard control
signal input)
Connect to the DVR/MATRIX-CON interface of the lower le el keyboard: RA
connects to TA, RB connects to TB.
We name the keyboard directly connecting the main keyboard upper level keyboard and we call the keyboard connecting to the upper
le el keyboard the lower level keyboard. For detailed information, see Chapter 2.4 for typical wiring methods.
User Manual of the DS-1004K keyboard 6
2.2
Front Panel Descri tion
Figure 2-2 To View on DS-1004KI Keyboard
Note:
Buttons on the keyboard ha e different functions in different controlling modes. For example, the IRIS+/EDIT button realizes the
IRIS+ in PTZ control mode and in the DVR control mode, it is the EDIT button, when pressing, you can edit the combox field.
Button Description
Lock Switch to change the working mode of the keyboard.
Playback Buttons Reser ed
Jog Shuttle Button Reser ed
SITE Press this button to enter the DVR No., dome camera No., analog matrix No. or the
VMS No..
AUX0 When controlling VMS, call the patrol of the dome camera.
AUX1 Reser ed
AUX2 Reser ed
AUX3 Reser ed
AUX4/ REC/SHOT DVR control mode: Audio on/ off and
PRESET Set and call the preset
PATROL Set and call the patrol
PATTERN Set and call the pattern
ACK Reser ed
MON-G When controlling VMS, choose the monitor group.
CAM-G/PLAY/AUTO
When controlling VMS, choose the camera group.
DVR control mode: Fast play when playing back.
WIN When controlling VMS, press the button to choose windows.
WALL When controlling VMS, select the TV wall after montage is done.
MULT When controlling VMS, select the small screen which has not been montaged.
MAC Reser ed
HOLD Stop cycling
RUN/F2/AUX Start or Go on the cycling
User Manual of the DS-1004K keyboard 7
Button Description
DVR control mode: change the tab menu
NEXT The next item, can be a channel or menu setting field.
LAST The pre ious item, can be a channel or menu setting field.
MON When controlling the VMS or analog matrix, press this button to choose the monitor.
CAM When controlling the VMS or analog matrix, press this button to choose the camera.
MODE Press to switch the control mode of the keyboard
Numeric & characters buttons
（0-9） Input the number or character; choose the li e iew or playback channel.
CLEAR Clear the numbers input and exit.
ENTER Enter
IRIS+/EDIT PTZ control mode: iris+
DVR control mode: enable editing
IRIS-/PTZ PTZ control mode: iris-
DVR control mode: show the PTZ control menu
FOCUS+/A PTZ control mode: focus+
DVR control mode: switch the input methods
FOCUS-/PREV PTZ control mode: focus-
DVR control mode: switch the screen display.
ZOOM+ PTZ control mode: zoom+
ZOOM-/ MAIN/SPOT PTZ control mode: zoom-
DVR control mode: switch between main and auxiliary mode
LIGHT/F1 PTZ control mode: turn on the light
WIPER/MENU PTZ control mode: enable wiper
DVR control mode: open the main men
2.3
Joystick Function
Gra hic O eration Function
Up PTZ control mode: Mo e the PTZ up.
DVR control mode: Fast Play when playback, or na igate to the pre ious item when
operating the menu.
Down PTZ control mode: Mo e the PTZ down.
DVR control mode: Slow play when playback, or na igate to the next item when
operating the menu.
Left PTZ control mode: Mo e the PTZ to the left.
DVR control mode: Skip backward when playback, or na igate to the pre ious menu
when operating the menu.
Right PTZ control mode: Mo e the PTZ right.
DVR control mode: Skip forward when playback, or na igate to the next menu when
operating the menu.
Left Rotate Zoom in
Right Rotate Zoom out
Notes ：
The joystick realizes pan and tilt mo ement at 8 directions.
The 4-axis joystick can be used to control the zoom; and the central button used as Enter button and to realize picture capture as well.
User Manual of the DS-1004K keyboard 8
2.4
Ty ical Wiring Methods
Figure 2-3 Connection between the keyboards, the keyboards and the dome camera, the keyboard and the DVRs
① shows the connection of the auxiliary keyboard and the main keyboard. You can connect many auxiliary keyboards to the
main keyboard.
② shows the connection between the keyboard and the DVR/NVR.
③ shows the connection of DVRs when they are all connected and controlled by the keyboard.
④ shows the connection between DVR and dome cameras.
User Manual of the DS-1004K keyboard 9
Figure 2-4 Connection between the main and auxiliary keyboards, and the keyboards and the dome camera
① shows the connection of the auxiliary keyboard and the main keyboard. You can connect many auxiliary keyboards to the
main keyboard.
② shows the connection between keyboard and dome camera.
③ shows the connection between dome cameras when they are all connected and controlled by the keyboard.
Autres manuels pour DS-1004KI
3
Table des matières
Autres manuels HIK VISION Clavier
HIK VISION
HIK VISION DS-1100KI Manuel utilisateur
HIK VISION
HIK VISION DS-1600KI Manuel utilisateur
HIK VISION
HIK VISION DS-1 KI Manuel utilisateur
HIK VISION
HIK VISION HI-1005KI Manuel utilisateur
HIK VISION
HIK VISION DS-1004KI Manuel utilisateur
HIK VISION
HIK VISION ES1005KI Manuel utilisateur
HIK VISION
HIK VISION DS-1100KI Manuel utilisateur
HIK VISION
HIK VISION DS-1600KIB Manuel utilisateur
HIK VISION
HIK VISION DS-1100KI Manuel utilisateur
HIK VISION
HIK VISION DS-1200KI Manuel utilisateur
HIK VISION
HIK VISION DS-1200KI Manuel utilisateur
HIK VISION
HIK VISION DS-1105KI Manuel utilisateur
HIK VISION
HIK VISION DS-1004KI Manuel utilisateur
HIK VISION
HIK VISION DS-1002KI Manuel utilisateur
HIK VISION
HIK VISION DS-1600KI Manuel utilisateur
HIK VISION
HIK VISION DS-1005KI Manuel utilisateur
HIK VISION
HIK VISION DS-1000KI Manuel utilisateur
HIK VISION
HIK VISION DS-1 Series Manuel utilisateur
HIK VISION
HIK VISION DS-1100KI Guide de l'utilisateur
HIK VISION
HIK VISION DS-1100KI Manuel utilisateur
