Audio Diode Configuration Tool | USER MANUAL
Configuring the Audio Diode
7
1. First, make sure to run and connect the Audio Diode Configuration Tool, as explained above.
2. Using the configuration screen, set the following Audio Diode parameters, described in the following table:
For the Volume Slider:
Warning Volume Moving the slider right or left will adjust the
Warning sound volume.
For the speaker/headphone button:
Open time (sec.) Once the user has pressed the button, how
long the speaker/headphone is open.
Quiet time (sec.)
If the user has pressed the button and no
audio has passed, how long the
speaker/headphone remains open. (Open
time > Quiet time).
Warning time (sec.)
How long before Open time, the Audio Diode
provides a warning notice that allows the user
to extend that time by pressing the button.
Number of extensions
allowed
The number of Warning time extensions
allowed for the speaker/headphone.
Skype ring forwarding Enables or disables the Skype ring forwarding
feature.
Speaker always on
The user can configure that the
speaker/headphone is always available,
ignoring the push button. (Not
recommended, risk of security breach!)
For the microphone button:
Open time (sec.) Once the user has pressed the button, how
long the microphone is open.
Quiet time (sec.)
If the user has pressed the button and no
audio has passed, how long the microphone
remains open. (Open time > Quiet time).
Warning time (sec.)
How long before Open time, the Audio Diode
provides a warning notice that allows the user
to extend that time by pressing the button.
Number of extensions
allowed
The number of Warning time extensions
allowed for the microphone.
Link Mic button to
speaker
Enables or disables the microphone button to
also open the speaker button.
Mic safety trigger (sec.) 1/2/3 – 1 is a simple press, 2 is a double
press, 3 is a 5-second press (default).
