MINIPROX READER 5365, 5368, 5365XXH
PROXPOINT PLUS READER 6005, 6008
THINLINE II READER 5395, 5398
PROX80 READER 5405, 5408
INSTALLATION
INSTALACIÓN
INSTALLATION
INSTALAÇÃO
INSTALLATION
INSTALLAZIONE
HID Corporation
9292 Jeronimo Road
Irvine, California
92618-1905 USA
tel:
+1 (949) 598-1600
U.S.A. (800) 237-7769
fax:
+1 (949) 598-1690
email:
www.HIDCorp.com
MINI PROX 5365XXHINCLUDES JUNCTION BOX
To install the hazardous location model:
• Mount the junction-box cover to the junction box.
• Mount the reader to the cover with the included screws.
• Route conduit and cable to the junction box (National Electric Code Article 720-2).
• Route wiring from junction box through the center hole of the cover.
• See CONNECTING and TESTING on the other side.
FCC WARNING
This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference that may cause undesired operation.
• For proper regulatory compliance, the drain wire should be disconnected at the power
supply end of the cable.
• Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
• The Reader is intended to be powered from a limited power source output of a
previously certified power supply.
PARTS
• 1 reader
• 2 #6-32x1" self
tapping
Type T or 23 screws
or 2 M3.5 x .6 pitch x
12mm long flathead
machine screws
(Prox80)
• 1 installation manual
Recommended
• 9 wire splices
• 1 grommet
• 1 cable, 5-9
conductor 22AWG
shielded
• Linear DC power
supply
Specifications
• Voltage range:
5.0-16.0 VDC
• Current:
max. average -
30mA
• 500' max. cable
distance to host
COMPONENTES
• 1 lector
• 2 módulos de
autoderivación del
N.º6 81x2,5cm (32x1
pulg) tipo "T"o 23 o 2
tornillos mecánicos
cabeza plana de
3.5 x0.6 x 12 mm.
(Prox 80)
• 1 manual de
instalació
Recomendable
• 9 empalmadores
• 1 arandela
• 1 cable, conductor
(5-9) blindado
calibre 22 AWG
• Fuente de
almentación lineal
CD
Especificaciones
• Intervalo de voltaje
5-16 VCC
• Corriente:
promedio máx - 30
mA
• Longitud máx. del
cable al sistema
central: 150 m.
PIÈCES
• 1 lecteur
• 2 vis
autotaraudeuses
nº 6 ; 81 x 2,5 cm,
de type T ou 23, ou
2 vis d'assemblage
à tête plate M,
pas 3,5 x 0,6
longueur 12 mm
(Prox80)
• 1 manuel
d'installation
Recommandations
• 9 épissures de câble
• 1 passe-fil
• 1 câble blindé
conducteur 5-9 fils
de diamètre 0,35
mm2
• Alimentation linéaire
cc
Spécifications
• Plage de tension :
5,0 - 16,0 Vcc
• Courant :
moyen max. : 30
mA
• Distance de
câblage
max. avec le
système
central : 150m
PEÇAS
• 1 leitor
• 2 cabos Tipo T ou 23
nº 6 (81x2,5 cm)
auto-adesivos
• 1 manual de
instalação
Recomendado
• 9 fios conectores
• 1 anel isolante
• 1 cabo, condutor 5-
9 22 AWG, blindado
• Rede elétrica CA
linear
Especificações
• Amplitude de
variação de
voltagem-
5,0 V CA-16,0 V CA
• Media de corrente
máx. 30 mA
• 150 m de distância
máxima do cabo
ao host
TEILE
• 1 reader
• 2 #6-32x1 Zoll
(81x2,5cm)
gewindefurchende
Schrauben Typ T oder
23 oder 2 M3.5 x 6x12
mm Flachkopf
Maschinenschrauben
(Prox80)
• 1 installierung
handbuch
Empfohlen:
• 9 Kabelspleißer
• 1 Gummidichtung
• 1 Kabel, 5-9 Leiter 22
AWG, abgeschirmt
• Lineare Gleichstrom-
versorgung
Spezifikationen
• 5,0 V Gleichspannung
- 16,0 V
Gleichspannung
• 30 mA maximale
durchschnittliche
spannung
• 150 m maximale
Kabelentfernung zum
Host
