HiB Eclipse Round Manuel
Thank you for purchasing this HiB product.
Please read through these instructions carefully and refer back to them during installation to ensure that
your product is tted safely and that it retains its high quality nish.
Please retain this leaet for future reference.
Before drilling, ensure there are no hidden cables or pipes in the wall and that the domestic mains supply
to which the mirror is to be connected is turned o.
These products are suitable for installation in zones: 2 OZ
Please see Figure 4 on the back page for details.
Eclipse & Libra Magnifying Mirrors
Eclipse Round: Art No. 21100
Ver No. 1.0 Nov 2015
Eclipse Square: Art No. 21200
Libra: Art No. 21400
Fixing Instructions
2
Installation
1. Position the magnifying mirror in a suitable location (according to the zonal diagram
overleaf, Figure 4), ensuring that the domestic electrical mains supply is within reach of the
electrical entry point of the product. Do not position in direct sunlight as the magnifying
eect of the mirror may pose a re hazard.
2. Remove the wall bracket from the base of the mirror via the xing(s) on the base of the unit
(see mounting diagram, gures 2&3).
3. Using the wall bracket as a guide, carefully mark the required drilling locations using a
soft pencil, ensuring it is level. Remove the wall bracket. Please ensure all marked drill
positions accurately match up with the xing points of the wall bracket before drilling.
4. Using a suitable drill bit, drill holes in the marked positions to a suitable depth. If drilling
through tile, use a ceramic drill bit.
5. Insert wall plugs level with the surface of the wall. If tting to a tiled surface, wall plugs
should be inserted below the tile surface to avoid cracking. NB. For plasterboard walls,
specialist xings should be purchased, available from any DIY or hardware store.
6. Fix wall bracket into wall plugs.
7. Connect the domestic mains supply to the terminal box according to the wiring diagram
below (gure 1).
8. Place the mirror onto the wall bracket and secure into place using the xing(s) on the mirror
base – take care not to trap wiring when assembling the mirror onto the wall bracket.
9. Switch on the domestic electrical mains supply to the mirror.
Operation Instructions
Libra - To turn illumination on, simply pull the front of the mirror away from the wall. To turn
the illumination o, simply push the mirror back towards the wall into the o position.
Eclipse - Illumination is switched on and o by the rocker switch on the underside of the mirror
base.
live
earth
neutral
MAINS SUPPLYLUMINAIRE
Wiring Diagram
Live supply can be Red or Brown
Earth supply is Green and Yellow
Neutral supply can be Blue or Black
Live is Brown
Earth is Green and Yellow
Neutral is Blue
Wiring Diagram (Fig. 1)
hib.co.uk 3
Libra (Fig. 2)
Mounting Diagram
Eclipse (Fig. 3)
Mounting Diagram
Wall bracket
Fixing
Point
Rocker switch
Mirror base
Fixing Instructions
Wall bracket
Mirror base
Fixing
Point
This product is suitable for installation in zones: 2 OZ
All installations must comply with guidelines which are based on a zonal concept. The diagram above
illustrates this concept and must be followed to ensure the safe installation of electrical appliances in the
bathroom. These regulations apply to domestic installations only. Installations must be made in accordance
with the current IEE wiring regulations and relevant building regulations. HiB recommends that all electrical
bathroom products should only be tted by a suitably qualied, Part P registered electrician.
©HiB Copyright: No part of this document may be reprinted or duplicated without HiB consent. All sizes and measurements are approximate, but we do try and
make sure they are as accurate as possible. In the interest of continuous product development, HiB reserves the right to alter specications as necessary. E & OE.
Building 3, North London Business Park, Oakleigh Road South, New Southgate, London. N11 1GN
Electrical Safety Information
HiB recommends that all electrical bathroom products should only be tted by a suitably qualied, Part P registered
electrician in accordance with current IEE reguations. Ensure mains power supply is switched o before starting
installation. Before drilling, ensure there are no hidden cables or pipes in the wall.
Care Instructions
Do not use abrasives or solvents when cleaning this product.
Wipe o all water spillages as soon as possible using a soft, damp cloth.
Aftercare Service
In the unlikely event that this product should fail please contact HiB customer services, contact detail shown below.
WEEE compliance
Must not be mixed with general household waste.
(Fig. 4)
Ce manuel convient aux modèles suivants
2
Table des matières
Autres manuels HiB Produit de soins personnels
HiB
HiB Xenon 50 Manuel
HiB
HiB Spectre 50 Manuel utilisateur
HiB
HiB Ariel 77470000 Manuel utilisateur
HiB
HiB Solas 50-CHRM Manuel utilisateur
HiB
HiB Arena 80 79530800 Manuel utilisateur
HiB
HiB Oliver Manuel utilisateur
HiB
HiB Beam 60 Manuel utilisateur
HiB
HiB Solstice 60 Manuel utilisateur
HiB
HiB Alpine 50 Manuel utilisateur
HiB
HiB Spectre 50 Manuel utilisateur
HiB
HiB Vega 50 Guide d'installation
HiB
HiB Solas 50-C Manuel utilisateur
HiB
HiB Beam 50 Manuel utilisateur
HiB
HiB LIBRA 21400 Manuel utilisateur
HiB
HiB AARON Manuel du propriétaire
HiB
HiB Sonic Manuel utilisateur
HiB
HiB Globe 45 Manuel utilisateur
HiB
HiB Velocity Manuel utilisateur
HiB
HiB Solstice 60-BLK Manuel utilisateur
HiB
HiB Demista D1 Manuel utilisateur
Manuels Produit de soins personnels populaires d'autres marques
Carex
Carex SunLite Manuel utilisateur
Roper Rhodes
Roper Rhodes Intense Manuel de la liste des pièces
Interacoustics
Interacoustics Titan IMP440 Instructions d'utilisation et de sécurité
ReTrak
ReTrak VS001 Manuel utilisateur
LED Technologies
LED Technologies dpl PAIN RELIEF Joint Wrap Manuel utilisateur
Casa Lusso
Casa Lusso MVL1000x450PR Manuel utilisateur
