Hi-Force BPP107 Manuel utilisateur

BPP107 BATTERY POWERED HYDRAULIC PUMP

OPERATING INSTRUCTIONS

TDS:-

1409

Prepared by:-

Patrick Wright

Approved by:-

Martin Davies

Date:08/10/14

REV NO:-

001

ECO:-

4294

Page 1of 12

SPECIFICATION:-

MODEL

BPP107

MAX .PRESSURE

700 Kg/cm2

MIN.PRESSURE

20 Kg/cm2

MAX. OIL DELIVERY

150 c.c.

MIN. OIL DELIVERY

500 c.c.

RESERVOIR CAPACITY

700 c.c.

VOLTAGE

14.4V

LENGTH

360mm

HIGH

260mm

WIDTH

170mm

WEIGHT (WITHOUT BATTERY)

7.8Kg

ACCESSORY

BP12:(14.4V Ni-MH battery)

1.8M HOSE*1

WIRE REMOTED CONTROL*1

BPP107 BATTERY POWERED HYDRAULIC PUMP

OPERATING INSTRUCTIONS

TDS:-

1409

Prepared by:-

Patrick Wright

Approved by:-

Martin Davies

Date:08/10/14

REV NO:-

001

ECO:-

4294

Page 2of 12

REMARKS BEFORE OPERATION OR WHILE OPERATING

Please be sure the tool with any greasy dirt and damage.

The hose can be bended but the half-length is more than110mm.

Before using pump, please connect it with suitable tools

Our hose is not insulated, so do not put the pump closed a fire situation.

Do not change its pressure in advance.(the max. pressure is 700kg/cm2 )

LED Battery Capacity Display

HOSE COUPLER

SWITCH:(ON/OFF)

REMOTED

CONTROL

COUPLER

OIL HOLE:

BATTERY

BPP107 BATTERY POWERED HYDRAULIC PUMP

OPERATING INSTRUCTIONS

TDS:-

1409

Prepared by:-

Patrick Wright

Approved by:-

Martin Davies

Date:08/10/14

REV NO:-

001

ECO:-

4294

Page 3of 12

How to operate the pump?

Insert a battery into the position.<image 1>

Image 1: take a battery in or out

Connect the Remote Control to the pump.<image 2>

Notice: turn the Remote Control clockwise to lock the pump;

turn the Remote Control anti-clockwise to unlock the pump.

Image 2: turn the Remote Control in or out

clockwise

anti-clockwise

BPP107 BATTERY POWERED HYDRAULIC PUMP

OPERATING INSTRUCTIONS

TDS:-

1409

Prepared by:-

Patrick Wright

Approved by:-

Martin Davies

Date:08/10/14

REV NO:-

001

ECO:-

4294

Page 4of 12

Connect the hydraulic hose to the suitable tool.(image 3 & 4)

After connect the hydraulic hose, lock the nut of hose to the tool clockwise tightly.

Image 3: connect the hose & tool together

Image 4: turn the nut to the tool tightly

Press “ON” button on the switch to operate the pump.<image 5>

Press “OFF” button on the switch, but the tools cannot crimp or release.

Image 5: operate the remote control

HOSE

Hydraulic tool

ON (crimping)

OFF (releasing)

BPP107 BATTERY POWERED HYDRAULIC PUMP

OPERATING INSTRUCTIONS

TDS:-

1409

Prepared by:-

Patrick Wright

Approved by:-

Martin Davies

Date:08/10/14

REV NO:-

001

ECO:-

4294

Page 5of 12

While crimping, please kindly notice the Battery Capacity LED Display on the body of pump.<Image

Image 6: LED Display of Battery Capacity

Light Color

Meaning

Red/Yellow/Green

Full Capacity

Red/Yellow

Low Capacity

Red

Without any Capacity

Please replace a full-charged battery

No Light

No electricity/Error connection

Green

light

Red

Yellow

BPP107 BATTERY POWERED HYDRAULIC PUMP

OPERATING INSTRUCTIONS

TDS:-

1409

Prepared by:-

Patrick Wright

Approved by:-

Martin Davies

Date:08/10/14

REV NO:-

001

ECO:-

4294

Page 6of 12

MAINTENANCE & ELIMINATE BREAKDOWN:

MAINTENANCE：

1. Q：Change oil or refuel oil:

A：Usually change fresh oil to keep its quality for lengthen its life and operate well. Always use Hi-

Force recommended hydraulic oil. Do not mix other brand oils together in case any damage to affect

its function.

2. Q: Prolonged storage without use:

A: 1. Take out the battery and charge if it will not be used for a long time. Discharge and charge battery

every two months to prolong its life.

2. Clean the tool and smear the anti-rust oil on crimping head and die before storage. Store the

battery and pump in a clean and dry environment.

ELIMINATE BREAKDOWN：

1. Q: How to add oil in the pump body?

A: Turn the screw out by a “slotted screwdriver” and add oil in the pump body.

After filling it to full, turn the screw in it. <image 7&8>

Image 7: turn the screw out Image 8: add oil in it

2. Q: Operating the pump, but it cannot release and return to the origin position.

A: Check the pump according to four steps.

<1> check the oil if it is not enough, (If no, choosing the suitable oil to fill.)

<2> check if there is any air in the oil reservoir, (add the suitable oil to full).

<3> check if there is impurities inside the reservoir, (renew the oil).

<4> check if there are impurities inside the body, (take apart the inner parts clean them then

reassemble).

BPP107 BATTERY POWERED HYDRAULIC PUMP

OPERATING INSTRUCTIONS

TDS:-

1409

Prepared by:-

Patrick Wright

Approved by:-

Martin Davies

Date:08/10/14

REV NO:-

001

ECO:-

4294

Page 7of 12

3. Q: When insert a battery in the pump, but it cannot to electrify.

A: Check the reason:

<1> check the conduction plate and insulate plate. If they are out of shape by extruded and broken

caused contact failure. It needs to adjust or change the parts.

<2> check the battery clips A & B. If they become rusty or out of the right position. They need to be

rid of rusty and put in the right position.(image 9)

Battery Clips A & B

BPP107 BATTERY POWERED HYDRAULIC PUMP

OPERATING INSTRUCTIONS

TDS:-

1409

Prepared by:-

Patrick Wright

Approved by:-

Martin Davies

Date:08/10/14

REV NO:-

001

ECO:-

4294

Page 8of 12

4. Q: Using the pump for a long time or inappropriate using, it will cause the pressure over or under the

standard. How to adjust the pressure?

A: Follow below steps.(image 10)

Image 10: adjust pressure

After adjusting to the positive pressure, put the cover in the hole.

Using a "No.4 Allen key” to adjust the pressure.

Be sure do not adjust the pressure aggressively, the pressure must adjusted in small increments.

BPP107 BATTERY POWERED HYDRAULIC PUMP

OPERATING INSTRUCTIONS

TDS:-

1409

Prepared by:-

Patrick Wright

Approved by:-

Martin Davies

Date:08/10/14

REV NO:-

001

ECO:-

4294

Page 9of 12

HOW TO OPERATE/USE CU12 CHARGER

The charger CU12 can charge Ni-MH

Battery BP12 (14.4V).

After discharging, while the temperature is below 40 degree,

the charger will charge automatically.

LED LIGHT DESCRIPTIONS

RED

Twinkling

Waiting for operation

RED

Shining

Temperature/Voltage is over

Buzzer buzzes once a second

GREEN

Twinkling

Well charged

Buzzer buzzes once five seconds

GREEN

Shining

Charging

ORANGE

Twinkling

Well discharged

ORANGE

Shining

Discharging

Voltage

Selection

Discharge

BPP107 BATTERY POWERED HYDRAULIC PUMP

OPERATING INSTRUCTIONS

TDS:-

1409

Prepared by:-

Patrick Wright

Approved by:-

Martin Davies

Date:08/10/14

REV NO:-

001

ECO:-

4294

Page 10 of 12

BP12

Please follow the battery manual for correct instruction.

The company does not guarantee against due to improper handling or use.

MANUAL/INSTRUCTION OF BATTERY

SPECIFICATION

Voltage

9.6V

14.4V

18V

CURRENT

CHARGING

Ni-MH

BP12

3Ah

90 MIN.

BEFORE OPERATION PLEASE NOTE

Do not put the battery together with any metal. Otherwise the battery may short circuit.

Do not store the battery in a wet/hot area. Put battery in a dry clean area.

Do not give the battery to children. Keep the battery away from the children.

The electric capacity of battery may be lost and the battery may be damaged if the battery is left in the

tool or charger for a long time.

Do not heat the battery or put the battery in the fire.

Keep the battery away from water. Please keep the battery dry & clean.

Do not press/take apart/throw down the battery. Do not leave the battery near water or fire. Also do

not put the battery in your pocket.

Do not destroy the housing/package/body of battery.

Do not use old transformed battery with strange/abnormal appearance.

The battery after use will be a little warm.

SPECIFICATION

MODEL NO.

BP12

VOLTAGE

14.4V

WEIGHT

0.86 KG

DIMENSION

100mm(L)x70mm(W)x140mm(H)

CHARGING TIME

80-90 MINUTES

CAPACITY

3Ah

MEMORY EFFECT

YES

Table des matières

Autres manuels Hi-Force Pompe à eau

Hi-Force

Hi-Force HEP4 Series Mode d’emploi

Hi-Force

Hi-Force HTWP Series Mode d’emploi

Hi-Force

Hi-Force AHP10 Manuel utilisateur

Hi-Force

Hi-Force HP110 Manuel utilisateur

Hi-Force

Hi-Force AHP1120б Series Manuel utilisateur

Hi-Force

Hi-Force HPF Series Mode d’emploi

Hi-Force

Hi-Force ATDP63 Mode d’emploi

Hi-Force

Hi-Force HEP2 Mode d’emploi

Hi-Force

Hi-Force HP227D Manuel

Hi-Force

Hi-Force Premium TPA-A Series Mode d’emploi

Hi-Force

Hi-Force MHP100 Manuel utilisateur

Hi-Force

Hi-Force ALUMINIUM HP211 Mode d’emploi

Hi-Force

Hi-Force HEP3 Manuel utilisateur

Hi-Force

Hi-Force HPP Series Mode d’emploi

Hi-Force

Hi-Force AHP-BTU Series Mode d’emploi

Hi-Force

Hi-Force TPE-A Series Mode d’emploi

Hi-Force

Hi-Force AHP1120 Series Manuel utilisateur

Hi-Force

Hi-Force HP110 Mode d’emploi

Hi-Force

Hi-Force HPX2800 Manuel utilisateur

Manuels Pompe à eau populaires d'autres marques

Neptun

Neptun NPHW 5500 Manuel utilisateur

Sensidyne

Sensidyne Gilian BDX-II Instructions d'installation et d'utilisation

Draper

Draper 47808 Manuel utilisateur

Trolla

Trolla 12820 Manuel utilisateur

Sunfab

Sunfab SVH Series Manuel utilisateur

WilTec

WilTec 50740 Manuel utilisateur

Fieldmann

Fieldmann FVC 5015 EK Manuel utilisateur

Everbilt

Everbilt EFSUB5-122HD Manuel utilisateur

Graco

Graco Husky 3300e Manuel utilisateur

esotec

esotec 101018 Manuel utilisateur

moyno

moyno 2000 CC Manuel utilisateur

Becker

Becker BASIC VASF 2.80/1-0.AC230 Manuel utilisateur

Sykes AmeriPumps

Sykes AmeriPumps GP100M Guide de dépannage

DUROMAX

DUROMAX XP WX Series Manuel utilisateur

BRINKMANN PUMPS

BRINKMANN PUMPS SBF550 Manuel utilisateur

Franklin Electric

Franklin Electric IPS Manuel utilisateur

Xylem

Xylem e-1532 Series Manuel utilisateur

Milton Roy

Milton Roy PRIMEROYAL Manuel utilisateur