HH Electronics TENSOR-MINI Manuel utilisateur
USER MANUAL
Page 1
CONTENTS
TENSOR-MINI OVERVIEW................................................................................................................................. 2
FEATURES ......................................................................................................................................................2
CONTROLS......................................................................................................................................................... 3
CHANNEL 1 & 2............................................................................................................................................. 3
LINE OUT & CHANNEL 3..............................................................................................................................4
BLUETOOTH AND USB CONTROLS .......................................................................................................... 5
MAINS INLET .................................................................................................................................................5
SETUP .................................................................................................................................................................. 6
MULTI-POSITION ..........................................................................................................................................6
BLUETOOTH CONNECTIVITY.....................................................................................................................6
USB PLAYBACK .............................................................................................................................................8
EQ SETTINGS.................................................................................................................................................9
BATTERY LEVEL............................................................................................................................................. 9
SPECIFICATIONS .............................................................................................................................................10
DIMENSIONS (in mm).................................................................................................................................11
SAFETY AND WARNINGS...............................................................................................................................12
Page 2
TENSOR-MINI OVERVIEW
The ultra portable Tensor-MINI is an easy to carry, lightweight, high power PA loudspeaker with built
in Li-Ion Battery. The versatile preamp includes a 3 channel mixer, DSP and reverb effects along with a
Bluetooth/USB media player. Bluetooth also supports stereo linking of two units. The multi-angle
cabinet can be used on the ground, as a monitor or on a pole stand and the user controlled EQ
adjustment ensures you can always get optimal sound quality. The Tensor-MINI is ideal for
Performers/Vocalists/Parties and more.
FEATURES
•Ultra compact, lightweight design
•6.5” Co-Axial full range driver
•High power amplifier
•3 channel Mic/Line/Instrument mixer with reverb
•Bass/Treble control
•Internal Li-Ion battery powered
•Media player with Bluetooth audio streaming and stereo linking
•USB media player capabilities
Page 3
CONTROLS
CHANNELS 1 & 2
1. XLR/6.3mm COMBI SOCKETS
Channel 1 and 2 inputs take either XLR or 6.3mm jack. Can connect balanced or unbalanced signals.
2. TONE PRESET SWITCH
Select between Mic, Instrument or Line mode for the channel.
3. REVERB LEVEL
Set the reverb level for the respective channel (available on 1 and 2), current level will show on the
LCD below. Push this to instead edit the bass/treble levels for the channel, again visible on the LCD.
4. VOLUME LEVEL AND SIGNAL INDICATOR
Volume level controls the preamp gain for that channel. Set to minimum when first setting up and
increase gradually to a suitable volume.
Signal indicator LED shows green when a signal is present on the channel and red when the signal is
clipping. Occasional red flashes are ok but avoid constant illumination of the red light. Turn the
volume down on your device or the MINI if so.
Page 4
LINE OUT & CHANNEL 3
5. LINE LEVEL OUT
6.3mm line level output to link to other devices. This will be the same mix of all 3 channels that plays
out of the speaker but at a line level. Also the output for this is post EQ so the bass, treble and reverb
settings will be applied.
6. AUX INPUT
3.5mm stereo aux socket. A line level input for audio use.
7. VOLUME LEVEL AND SIGNAL INDICATOR
Control the volume for the aux input as well as the USB and Bluetooth inputs.
Signal indicator LED shows green when a signal is present on the channel and red when the signal is
clipping. Occasional red flashes are ok but avoid constant illumination of the red light. Turn the
volume down on your input device or the Tensor-MINI if so.
Page 5
BLUETOOTH AND USB CONTROLS
8. USB SOCKET
Connect your mobile phone or USB flash drive here to use USB channel of the Tensor-MINI.
9. PLAYBACK CONTROLS
Used to control the playback for USB and Bluetooth audio, cycle through USB folders, set the mode
for channel 3 and enter EQ adjustment. For more info see USB Playback (Page 7).
10. LCD
Display screen for outlining Bluetooth and USB playback as well as indicating EQ settings.
MAINS INLET
11. POWER SWITCH
Turns the system on and off. It is good practice to keep the master
volume at minimum when switching on and off.
12. C7 IEC MAINS SOCKET
C7 type IEC input to connect with the provided mains lead. Accepts
universal voltage 100-240V~.
Page 6
SETUP
MULTI-POSITION
Depending on your use case, the Tensor-MINI can be used in various positions:
BLUETOOTH CONNECTIVITY
To connect a device, such as a mobile phone, press the MODE button so
that the letters “bt” show on the LCD display, alongside a flashing
Bluetooth symbol on the bottom left. The MINI is now looking for a device
to pair to.
On your device’s Bluetooth settings, find the device named “TENSOR-
MINI” and connect to it. Upon pairing, the Bluetooth logo will stop flashing
to signal a connection.
Songs can be paused/resumed with the play/pause button and
skipped/backtracked using the forward/backward buttons.
To unpair from a Bluetooth connected device, simply hold down the Play/Pause button for approx. 1-
2 seconds. Will only work whilst in Bluetooth mode.
Page 7
To connect two Tensor-MINIs via TWS, have both speakers on Bluetooth mode and hold the shuffle
button on one for 3 seconds to enter pairing mode. The screen will show “bt –n”.
Hold down the same button on the other unit to activate TWS on it. Both Tensor-MINIs will pair
together and their screens will show “bt-L”and “bt-R”to indicate the left and right channels.
When they’re linked, you can pair your mobile device as usual.
Page 8
USB PLAYBACK
A USB flash drive can be plugged into the USB socket on the back of the
MINI to play audio from. The USB can contain multiple folders of music that
can be played individually or shuffled together.
Use the “MODE” button to cycle between the Bluetooth input and the USB
input for channel 3. If nothing is plugged into the USB socket, or if the
device is not compatible, “NO” will appear on the LCD.
With usable USB plugged in, the word USB will show as well as the runtime
of the current audio track.
Whilst in USB mode, cycle through the tracks in the current folder using the
forward/backward buttons on the right. Pause or resume the current track with the play/pause button.
By holding the play button for 1-2 seconds, it is also possible to navigate through the USB folders via
the forward/backward buttons.
The shuffle button will cycle through different playback modes, with the currently selected mode
displayed on the LCD when pressed. “ALL” will play through all tracks available. “ONE” plays the
current track then stops. “RAND” is a random shuffle of the available tracks.
Page 9
EQ SETTINGS
All 3 channels can have their own bass, treble and reverb settings
modified through the controls on the Tensor-MINI.
For channels 1 and 2, push in the reverb knob to modify the EQ for the
respective channel. For channel 3, hold the “MODE” button for 1-2
seconds until the “H” (high frequency level) shows on the LCD. The current
set level shows on the right hand side and can go from -10 to +10. A
minus sign appears to the right of the “H” to indicate a negative value.
Use the reverb knob or the rewind/skip buttons to increase or decrease
the value.
Press the reverb knob (CH1/2) or ”MODE” (CH3) button again to change
the bass/low frequency level, again ranging from -10 to +10.
Press the reverb knob again (CH1/2 only) to modify the reverb –“RE” level
of the channel. This ranges from 0 to +16.
BATTERY LEVEL
The battery level and charging status are both indicated by the LED found on the top of the Tensor-
MINI. Be sure to keep an eye on this display whilst in use, especially if the power cable is not
connected.
Table des matières
Autres manuels HH Electronics Système de haut-parleurs
Manuels Système de haut-parleurs populaires d'autres marques
Sondpex
Sondpex Active Speaker System and Digital Music... Manuel utilisateur
JVC
JVC NX-PN7 Manuel utilisateur
Marshall Amplification
Marshall Amplification AR-DM61-BT Manuel utilisateur
Yamaha
Yamaha NX-A01 - Speaker Sys Manuel utilisateur
SE Audiotechnik
SE Audiotechnik I-LINE Manuel utilisateur
Gemini
Gemini WRX-843 Series Manuel utilisateur