HGLRC Forward 45A 4in1 MINI ESC Manuel utilisateur
1
www.hglrc.com
Forward 45A 4in1 MINI ESC
Manual
2
www.hglrc.com
Product Specifications.............................................................................................................................1
Interface Description...............................................................................................................................2
Upgrade ESC firmware.............................................................................................................................3
Troubleshooting.........................................................................................................................................4
.....................................................................................................................
Package IncIuded
Forward 45A 4in1 MINI ESC*1
Accessory Bag*1
3
www.hglrc.com
1.Product Specifications
Product parameters
Model
Forward 45A 4in1 MINI ESC
Input Voltage
2-6S Lipo battery
CPU
STM32F051
Continuous current
45A-4S/35A-6S
Peak Current
55A（5s）
Firmware
BLHELI_32
MOS Tube
TOP QUALITY MOSFET
BEC Output
NO
Protocol:
DSHOT1200/600/300/150/
Oneshot125/42,MultiShotDa
mped mode,forward and
reverse
Size
36.5X31.7mm board, 20.0mm
mounting holes（M2）
Weight
10.8g
4
www.hglrc.com
2.Interface Description
5
www.hglrc.com
3.Upgrade ESC firmware
1.First, the flight controller is connected to the ESC and then opened
(BLHeliSuite32) for connection.Select com serial port（Different computer
COM）
6
www.hglrc.com
2. click the link .Plug in the battery and click .The ESC
version number appears.Then Click ESC upgrade。
7
www.hglrc.com
3. Change motor steering
1. Open first (BLHeliSuite32) to connect.Find the ESC model that needs to
change direction (right mouse button to select ESC).Remembering to save
after modification。Remember to modify and click (Write Setup) to save
8
www.hglrc.com
4.Troubleshooting
Warning:
Please read the cautions as follows, otherwise stability of your flight
controller cannot be ensured, your flight controller will even get damaged.
●Keep focus on the polarity. Check carefully before power supply.
●Cut off the power when you connect, plug and pull anything.
9
www.hglrc.com
after sales question:
1. After receiving the goods, it is found that the product can not be used
normally. If the return to the factory is a quality problem, the repair
service will be provided free of charge.
2. If the product is damaged due to improper operation, the repair service
may be provided under the condition that the inspection can be repaired.
3. For domestic customers, please contact the after-sales service personnel.
For overseas customers, please contact the official website for after-sales
service.
Product daily problems:
1. The ESC does not pass the self-test:
Check if the ESC protocol is correct.
2. Connect BLHeliSuite32 software ESC does not
recognize:
1. Please check if the ESC connection flight control cable is loose.
2. Change the USB cable test or change the computer USB socket test
Table des matières
Autres manuels HGLRC Contrôleurs
HGLRC
HGLRC Zeus35 Manuel utilisateur
HGLRC
HGLRC Zeus5 AIO Manuel utilisateur
HGLRC
HGLRC Zeus25 AIO Manuel utilisateur
HGLRC
HGLRC Zeus F722 Manuel utilisateur
HGLRC
HGLRC F4 WING FC Manuel utilisateur
HGLRC
HGLRC FD413 Stack Manuel utilisateur
HGLRC
HGLRC Zeus F755-VTX Manuel utilisateur
HGLRC
HGLRC Zeus F760-VTX stack Manuel utilisateur
HGLRC
HGLRC Zeus F745 STACK Manuel utilisateur
HGLRC
HGLRC Zeus25 V2 AIO Manuel utilisateur
