Herutu 21D Series Manuel utilisateur

Wired Production Control Indicator

Display

21D-429D

21D-265D

21D-485D

Instruction Manual V1.90

Please use this Instruction manual correctly on reading well.

Please keep it carefully to be able to read immediately, when required.

[21D] Notational Conventions for Series Model

Set (Controller ＋Display)

Machine

types

Item

Communica

tion

Display type

LED color

***

429

123

265

523

124

D5W

524

152

DEW

1523

1524

For the Controller only, the contents of 3Communication are as follows:

429C

265C

For the Display only, the contents of 3Communication are as follows:

429D

265D

485D

1 Machine types: D→Large-sized 4-digit Single side, D5→Large-sized 5-digit Single side，

DW→Large-sized 4-digit Double side

D5W→Large-sized 5-digit Double side，

DE→Middle-sized 5-digit Single side，DEW→Middle-sized 5-digit Double side

2 Item : 2-4 items

3 Communication: 429→Specific small-current radio wave

265→Micro radio wave

485→Wire-type

*For the 485 type, only the Display is available.

4 Display type : 1→Target 2→Actual 3→Advancement4→Accomplishment rate 5→Plan

5 LED color : G→Green R→Red

*For the Middle-sized type, only red color is available.

To use this product in safety and comfort, (Be sure to read)

Thank you very much for purchasing our product.

This operation manual contains the precautions necessary for preventing an accident caused by the use

in an improper ways.

Read it carefully while thoroughly understanding the meanings of pictorial symbols.

Using in an improper way while ignoring this pictorial symbol might

cause a serious human injury.

Using in an improper way while ignoring this pictorial symbol might cause

a human injury or property damage.

■The type of precautions that should be observed, are classified using the following pictorial symbols.

This pictorial symbol indicates a “Reminder”to attract an attention.

This pictorial symbol indicates a “Prohibition”to prohibit a certain action.

■For the usage to be commonly applied in all the models:

Avoid using in a place with a plenty of humidity or dust. Otherwise, absorbing a dust or

water contents may cause machine trouble, fire or electrical shock.

■For handling this machine:

●This is the electronic devise or wireless radios composed of the precision parts.

Do not overhaul/remodel. It may cause accident or machine trouble.

！Warning

！Caution

！

tyuui

！Caution

■For handling this machine:

●Do not use this product for the application needing the high reliability

related to human lives.

●Do not use this product in a place where it is uncertain about whether or not

radio waves reach.

■For handling the power source:

Be sure to observe the following precautions to prevent the AC adapter and Power cord from

being heated, damaged, or ignited.

Do not approximate theAC adapter and Power cord to a fire, or do not put

them into a fire. The AC adapter and Power cord can be broken or ignited,

resulting in an accident.

●You can use the AC adapter and main body only with the specified power

voltage to protect them from the damage and fire accident.

●Do not use theAC adapter and main body in a wettable atmosphere.

It may cause accidents or troubles such as heating, igniting or electrical shock.

●Do not touch theAC adapter, main body, Power cord and Plug outlet

with wet hands. It may cause an accident such as electrical shock, etc.

●Do not damage the Power cord.

A short-circuit or heating may cause a fire or electrical shock.

●Do not use the Power plug with dust being adhered.

A short-circuit or heating may cause a fire or electrical shock.

●Do not give a strong impact onto theAC adapter.

It may cause an accident or machine failure.

●If you find out deformedAC adapter, do not use it.

It may cause an accident or machine failure.

●Do not use this product in a place where flammable gas can be generated.

It may cause a fire accident.

●Never overhaul theAC adapter.

It may cause an accident or machine failure.

■When trouble happens during use:

Since it may cause a fire or electrical accident, disconnect a power plug, and immediately ask

outlet store or our company to repair.

When smoke or abnormal odors are generated, stop using, immediately

disconnect a power plug, and ask outlet store or our company to repair.

●Once the Power cord is damaged, do not use it.

Using it as is may cause a fire or electrical accident.

！

！Warning

※This operation manual is translated a product for Japan into English/

This product is based on Japanese Wireless law.

 
Contents 
 
1. General Description................................................................................................................... 1 
1-1. Scope.................................................................................................................................... 1 
1-2. Outline .................................................................................................................................. 1 
1-3. Machine types...................................................................................................................... 1 
1-4. Display type ......................................................................................................................... 2 
1-5. Communication ................................................................................................................... 2 
2. Specifications............................................................................................................................. 3 
2-1. 3-command type.................................................................................................................. 3 
2-2. 2-command type.................................................................................................................. 4 
2-3. 4-command type.................................................................................................................. 5 
3. Names and Functions of each section .................................................................................... 6 
4. Setting and Installation methods.............................................................................................. 7 
4-1. Installing the Display .......................................................................................................... 7 
4-2. Connecting the Power cord................................................................................................ 7 
4-3. Connecting the Communication cable for 485 Communication type ........................... 9 
4-4. Setting the communication channel ................................................................................11 
4-5. Setting the equipment No................................................................................................. 14 
5.Operation.................................................................................................................................... 16 
6. Applications - Direct display................................................................................................... 17 
6-1. Transmitter......................................................................................................................... 18 
6-2. Communication specifications........................................................................................ 18 
6-3. Changing the error check system................................................................................... 20 
7.Warranty..................................................................................................................................... 21 
Dimensional drawing................................................................................................................ 23 
 
 
 
 
 
 
 
 
 
 
 
 
 

General Description

1. General Description

1-1. Scope

The specifications are applied to the [21D] SERIES wireless production display system.

1-2. Outline

The [21D] SERIES wireless production display system consists of the Controller and the

Display.

Since wireless communication is available between controller and display system, there is no

need to make wiring and you can take actions with ease even if layout is changed.

Various types of [21D] Series Displays available allow you to select anything of size,

digit-number, Single side/Double side and display items at your own way.

Also, because the [21D] Series Display will receive and display the data corresponding to

the specified communication format, optional data can also be displayed via the modem from

the computer on behalf of the Controller of either [21D-429C] or [21D-265C].

1-3. Machine types

Types

Large-sized 21D

（4-digit and 5-digit display）

Middle-sized 21DE

（5-digit display）

2-command type

21D-2

21DE-2

3-command type

21D-3

21DE-3

4-command type

21D-4

21DE-4

2-command double side type

21DW-2

21DEW-2

3-command double side type

21DW-3

21DEW-3

4-command double side type

21DW-4

21DEW-4

2-command 5-digit type

21D5-2

――――

3-command 5-digit type

21D5-3

――――

4-command 5-digit type

21D5-4

――――

2-command 5-digit double side

type

21D5W-2

――――

3-command 5-digit double side

type

21D5W-3

――――

4-command 5-digit double side

type

21D5W-4

――――

General Description

1-4. Display type

The 21D series allows you to select several kinds of display types through the combination of

“Target”, “Actual”, “Advancement”, “Accomplishment rate”and “Plan”.

You can select the display type of acrylic plate character among the following types.

*To specify the motion type, use the Controller.

1: Target 2: Actual 3: Advancement 4: Accomplishment rate 5:Plan

Commands

Types

Numeric representation

3-command

Target/Actual/Advancement

123

Plan/Actual/Advancement

523

Target/Actual/Accomplishment rate

124

Plan/Actual/Accomplishment rate

524

Target/Plan/Actual

152

2-command

Target/Plan

Target/Actual

Plan/Actual

Actual/Advancement

Actual/Accomplishment rate

4-command

Target/Plan/Actual/Advancement

1523

Target/Plan/Actual/Accomplishment

rate

1524

1-5. Communication

The 21D SERIES Display lets you select the following communication types.

The Display is used only for receiving.

Communication

Contents

429

Communication method by means of Specific small-current radio wave

Communication range is about 100 to 300m

265

Communication method by means of micro radio waves

Communication range is about 20 to 30m.

485

Communication method by means of RS-485 Communication

Communication range is about 1.2km. Connected with a twisted pair

cable.

Cannot be used as a set combined with 21D series Controller.

Specifications

2. Specifications

2-1. 3-command type

<3-command large-sized type>

21D－3

21DW－3

21D5－3

21D5W－3

Indicator

character

(4-digit x 2-line)+(Symbol+ 3-digit x

1-line) or 4-digit x 3-line

(5-digit x 2-line) +(Symbol +4-digit x

1-line) or 5-digit x 3-line

Display surface

Single side

Double side

Single side

Double side

Indicator

element

High-luminance 7-segment LED display

Character

110H x 60wmm

Size of case

600W x 600H x 80Dmm

Power source

AC100V (Max input range: AC85 –125V)

Working

environment

Temperature:

0- 50℃

Humidity:85% or

less(no dew drop)

Temperature:

0- 40℃

Humidity:85% or

less(no dew drop)

Temperature:

0- 50℃

Humidity:85% or

less(no dew drop）

Temperature

:0-40℃

Humidity:85% or

less(no dew drop)

Commun

ication

429

For receiving only (Use optional one wave of 40 waves ranging 429.2500 -

429.7375MHz.)

265

For receiving only (Use optional one wave of 41 waves ranging 264.500 -

265.500MHz.)

485

For receiving only (RS485 x 1)

Power

consumption

MAX47W

MAX88W

MAX58W

MAX111W

Weight

About 9.0kg

About 9.8kg

About 9.2kg

About 10.1kg

<3-command middle-sized type>

21DE-3

21DEW-3

Indicator

character

(5-digit x 2-line)+(Symbol+4-digit x

1-line) or 5-digit x 3-line

(5-digit x 2-line)+(Symbol+4-digit x

1-line) or 5-digit x 3-line

Display surface

Single side

Double side

Indicator

element

High-luminance dispersion type red-color 7-segment LED

Character

55H x 30Wmm

Size of case

400W x 360H x 65Dmm

Power source

AC100V (Max input range: Ac85 - 125V）

Working

environment

Temperature: 0-50℃Humidity: 85% or less(no dew drop)

Commun

ication

429

For receiving only (Use optional one wave of 40 waves ranging 429.2500～

429.7375MHz.)

265

For receiving only (Use optional one wave of 41 waves ranging 264.500～

265.500MHz.)

485

For receiving only (RS485 x 1)

Power

consumption

MAX19W

MAX34W

Weight

About 4.2kg

About 4.5kg

Specifications

2-2. 2-command type

<2-command large-sized type>

21D-2

21DW-2

21D5-2

21D5W-2

Indicator

character

(4-digit x 1-line)+(Symbol+3-digit x

1-line) or 4-digit x 2-line

(5-digit x 1-line)+(Symbol+4-digit x

1-line) or 5-digit x 2-line

Display surface

Single side

Double side

Single side

Double side

Indicator

element

High-luminance 7-segment LED

Character

110H x 60Wmm

Size of case

600W x 445 H x 80Dmm

Power source

Ac100V（Max input range:Ac85 –125V）

Working

environment

Temperature:0-50℃

Humidity:85% or less (No dew drop)

Temperature:0-40℃

Humidity:85% or less (No dew drop）

Commun

ication

429

For receiving only (Use optional one wave of 40 waves ranging 429.2500 -

429.7375MHz.)

265

For receiving only (Use optional one wave of 41 waves ranging 264.500 -

265.500MHz.)

485

For receiving only (RS485 x 1)

Power

consumption

MAX38W

MAX63W

MAX44W

MAX84W

Weight

About 7.2kg

About 7.6kg

About 7.4kg

About 8.1kg

＜2-command middle-sized type＞

21DE-2

21DEW-2

Indicator

character

(5-digit x 1-line)+(Symbol+4-digit x

1-line) or 5-digit x 2-line

(5-digit x 1-line)+(Symbol+4-digit x

1-line) or 5-digit x 2-line

Display surface

Single side

Double side

Indicator

element

High-luminance dispersion type red-color 7-segment LED

Character

55H x 30Wmm

Size of case

400W x 285H x 65Dmm

Power source

AC100V (Max input range: AC85 - 125V)

Working

environment

Temperature:0-50℃Humidity:85% or less（No dew drop）

Commun

ication

429

For receiving only (Use optional one wave of 40 waves ranging 429.2500 -

429.7375MHz.)

265

For receiving only (Use optional one wave of 41 waves ranging 264.500 -

265.500MHz.）

485

For receiving only (RS485 x 1)

Power

consumption

MAX15W

MAX25W

Weight

About 3.7kg

About 3.9kg

Ce manuel convient aux modèles suivants

Table des matières

Manuels Moniteur populaires d'autres marques

Linear Acoustic

Linear Acoustic LQ-1000 Manuel utilisateur

AOC

AOC I2579V Manuel utilisateur

Gateway

Gateway FPD1520 Manuel utilisateur

Furuno

Furuno Mu 120c Manuel utilisateur

Asus

Asus VB171D - 17" LCD Monitor Manuel utilisateur

Dell

Dell S2230MX Instructions d'utilisation

Philips

Philips 107C64 Manuel utilisateur

Dell

Dell S2409WFP Manuel utilisateur

EverFocus

EverFocus EN-7517E Manuel utilisateur

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Manuel utilisateur

Dell

Dell Precision 7680 Mode d’emploi

LG 50PM1M - - 50" Plasma Panel Manuel utilisateur

Bosch

Bosch DDU 9 Manuel utilisateur

Acer

Acer A231HL Manuel utilisateur

Philips

Philips 86BDL4152T Manuel utilisateur

NEC

NEC AccuSync LCD5V Manuel utilisateur

Emay

Emay SleepO2 Manuel utilisateur

IBM

IBM 6360 Instructions d'installation