Henriksen Jazzamp 310 Manuel utilisateur
JazzAmp
310/312 Owners Manual
Henriksen Ampliers
Thank you for purchasing your Henriksen Amplier, we hope you enjoy
playing it as much as we enjoyed building it!
Since 2006 our mission has been to empower the working musician by
creating truly gig-able amplication solutions which are extremely portable,
durable, versatile in function and have the highest possible tonal quality.
We accomplish this by manufacturing all products ourselves; choosing
to locally source all possible materials, auditing and inspecting every
component and individually play testing every single amplier before we
ship it. We will neither build nor sell anything you cannot rely on at the
professional level, and we take as much pride in our customer service
as we do in our products. Please always feel free to contact us with any
questions, comments, or a shop tour if you’re in the Denver area, and
thank you again for your business.
Peter Henriksen, President
INPUT GAIN
The input gain control is to accommodate a variety of instrument outputs. In
the 12:00 position, the input gain is where you want it for most magnetic pickup
systems. For higher output pickups, active pickups, mics or effect devices, you
can adjust the input gain down so the preamp is not overloaded. For lower output
devices such as piezoelectric transducers, you can adjust the input gain up. The
input gain control setting should be experimented with in concert with the volume
control setting on your instrument and each instrument will be different so start
with the control at 12:00 and go from there.
INPUT JACK
The JazzAmp has a 1⁄4”/XLR combo INPUT jack on each channel. This jack may
be used to plug in a standard 1⁄4” instrument cable or an XLR cable. The XLR
is unswitched 48-volt phantom powered, so refer to the device manufacturer to
conrm compatibility.
5-BAND EQUALIZER
When it comes to the EQ controls, a little goes a long way so it’s best to start off
with them all set to the 12:00 position. The EQ is set up from LOW (100Hz) to
HIGH (10kHz). If you are new to using an equalizer, think of each EQ control
as a volume knob that only affects the volume level of its designated frequency
range. In simplest terms, the 100Hz control is a volume knob for your low E
and A string, the 300Hz control is a volume knob for the middle range of the
guitar, the 1kHz for the upper range, and the 3kHz and 10kHz is for the harmonic
overtones and the tweeter frequencies. The sound will vary from room to room,
and you should experiment with having the amp on the oor, tilted back, and up
on a stand to nd the best sound.
BRIGHT SWITCH
When turned on, the bright switch increases the higher frequencies of the signal
before going to the EQ. Note: If the input gain is set to 9:00 or below, the bright
switch will have little effect.
LINE OUT
The LINE OUT is both channels, post-EQ and post-reverb, and provides a balanced,
low impedance signal for use with mixing boards, PA systems, or recording.
HEADPHONE JACK
The HEADPHONE jack will defeat the main speaker (but not the extension speaker
output) and is post-EQ and post-reverb. CAUTION: Listening to headphones at high
volumes can cause permanent hearing loss.
EXTENSION SPEAKERS
You can connect a second speaker cabinet to your JazzAmp. This does not
disconnect the internal speaker, and any extension cabinet must be a minimum of
8 ohms and able to handle over 100 watts. DO NOT CONNECT OR DISCONNECT
AN EXTENSION SPEAKER WHILE THE AMPLIFIER IS ON.
POWER AND FUSES
Your amplier is factory set to either 115 volt or 230 volt power depending on which
country was originally shipped to. The voltage can be changed internally, please
contact Henriksen, Inc. or your dealer for specic instructions. For 230 volt amps,
fuse should be a 1A250V Slow Blow. For 115 volt amps, the fuse should be a
1.6A250V Slow Blow.
FX LOOPS
The FX loops send the signal from the amp post-EQ and return it pre-reverb.
(FX Loop detail on page 5)
FX LOOP
TIP: SEND
RING: RETURN
LINE
INSTR
TWEETER DEFEAT SWITCH
The tweeter is connected via a high-pass lter, using this switch allows you to
toggle the tweeter on and off without changing the sound coming through the
main driver.
FX LOOPS (CONT)
There is a switch to send level from +4db line
level to -10db instrument level, most devices
will work best with the switch set to line level.
WARRANTY
(Please take a moment to register at www.henriksenampliers.com/register). Our 2-year
warranty covers repairs not caused by abuse. Henriksen, Inc. or a licensed repair shop must
complete all repairs. Contact your dealer or Henriksen, Inc. directly for service.
FX LOOP
TIP: SEND
RING: RETURN
LINE
INSTR
The jack is a Tip/Ring/Sleeve type, where the tip is the send and the ring
is the return.
To use the FX loop you will need a send/return Y-cable.
ACCESSORIES FOR THE JazzAmp
Heavy Duty, Premium
JazzAmp 310 or 312 Gig Bag
FX Loop TRS send/return
Y-cable
Professional Instrument Cable
10 ft. Neutrik Gold with
90 degree Silent Plug
Gig bags for your JazzAmp 310 and 312 (or
older models) with shoulder strap and oversized
pocket large enough for a Real Book, cables and
a pedal or two.
Since we upgraded the JazzAmp lines to have
TRS effect loops, we have had so many people ask
where they can nd a Y-split cable to use it with that
we just decided to sell them ourselves. These are
10′ long snake cables, with 2′ of Y-split on the send
and return sides.
High quality, hand built instrument cables with a
LIFETIME GUARANTEE. Made with the same
components as the more expensive brands, but at
factory direct pricing!
312
310
ALSO AVAILABLE FORM HENRIKSEN AMPLIFIERS
The Bud • 120 watts
• 17 lbs
• 9”x9”x9”
• 1/8” aux. input
• Dual channel, each with independent 5-band EQ and reverb, 48 volt
phantom powered XLR/1/4” combo inputs, and input gain control
• TRS send/return FX loops for each channel with instrument/line
level select
• Channel 2 bright switch
• XLR balanced line out (post EQ and reverb, both channels).
• 6.5” Eminence Beta 6 speaker with special uid-cooled, high-yield
neodymium tweeter (defeat-able)
• Ext. speaker out
• Headphone jack
• Tweeter defeat switch
BUD Passive Cabinet Heavy Duty, Premium,
BUD Gig Bag
9”x9”x9”, 11lbs
The Bud packs incredible tone, plenty of real power and all
the features you need into a 9”x9”x9”, 17 lb package.
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Henriksen Amplificateur
