HENGBO HB-2020 Series Manuel utilisateur

HB-2020 Series

H orizontal

orizontal

orizontal Alarm

Alarm

Alarm Host

Host

User

User Manual

Manual

A/C

Ningbo

Ningbo Hengbo

Hengbo

Hengbo Telecommunication

Telecommunication

Telecommunication Co.ltd

Co.ltd

Table

Table of

of Contents

Contents

I. Introduction …………………………………………… ..(1)

II. Operating Precautions ………………………………… ..(2)

III. Main Functions and Characteristics …………………… (3)

IV.

Name and Usage of Main Parts ………………………… (4)

Interface Performance and System Connection ………… (6)

VI. System Installation …………………………………… ..(6)

VII. Operating Instructions ………………………………… (7)

VIII. How to Add/Remove Wireless Detectors …………… .(15)

IX. Main Technical Specifications ………………………… (16)

X. Packing List …………………………………………… .(16)

XI. List of Optional Parts ………………………………… (16)

XII. Simple Failure Recovery …………………………… .(17)

I. Introduction

Introduction

HB-2020 Series alarm receiving systems are a complete set of

long-distance regional alarm systems, which are composed of

HB-2020 computer-controlled wireless receiving hosts and HB-T001

Series solar-powered opposite-type wireless infrared detectors. They

can be widely used

industrial and mining establishments, computer

rooms, schools, warehouses and other locations.

HB-2020 Series Wireless Receiving Hosts

HB-2020A wireless receiving host adopts secondary frequency

conversion processing technology and adopts 8-bit single chip as

control core. It has advantages of high receiving sensitivity, easy

operation, powerful functions and stable performance.

HB-2020C wireless receiving host adopts secondary frequency

conversion processing technology and adopts 8-bit single chip as

control core. It has advantages of high receiving sensitivity, easy

operation, powerful functions and stable performance. Besides,

can

automatically dial pre-set telephone numbers , and also has the

function to send an alarm message when the telephone line is dead ,

and learn the code with a remote controller.

II.

II. Operating

Operating

Operating Precautions

Precautions

�Please carefully read this User Manual and pay more attention to

labels and directions on the wireless receiving host before

operation. Check whether

all

wire connections are correct and

then turn the host on for test so as to prevent occurrence of any

accident.

�The clock module of the host has built-in

ithium b atter ies

which can keep the clock module working continuously during

power failure. The battery life is about 1 year. If the host can not

display the right time, please contact our aft er-sales service for

battery replacement.

�This wireless receiving host can be equipped with 12V 1.2Ah

sealed lead acid batteries. If power failure often occurs

some

defense areas, batteries with larger capacity are recommended as

backup power.

�Please don ’ t disassemble the wireless receiving host

order not

to cause accidents or damage the apparatus.

�If failure occurs during operation, please hold the warranty card

to approach our client service centre or agents timely. Remember

not to disassemble or repair

by yourself.

�Please periodically perform test so as to identify and debug

failures

time.

III.

III. Main

Main

Main Functions

Functions

Functions and

and

and Characteristics

Characteristics

1. Function

Function

Function Introduction

Introduction

Introduction of

of HB-2020-A

HB-2020-A

HB-2020-A Wireless

Wireless

Wireless Receiving

Receiving

Receiving Host

Host

�The solar-powered wireless

frared detector can automatically

learn code with the wireless receiving host. And

is easy and

fast to expand system capacity .

�1-100 independent wireless defense locations can be defined and

each defense location can be armed or disarmed independently.

The attributes of each defense location can be defined at will.

�The wireless receiving host can pre-set two groups of on/off

times, and can indicate present on/off state.

�Three kinds of alarm sound and four levels of alarm sound

volume are optional.

�Ten pieces of up-to date alarm messages will be display ed

simultaneously.

�60 pieces of latest alarm messages can be inquired.

�Build-in backup battery is optional. And

is equipped with

floating charge device.

�

set of normally open relay output, a set of normally closed

relay output and +12V DC output are provided to control other

devices (e.g. alarm siren startup, alarm lamp and alarm linkage

etc.)

�

�I t has enclosure damage alarm function.

2. Function

Function

Function Introduction

Introduction

Introduction of

of HB-2020

HB-2020

HB-2020 C

C Wireless

Wireless

Wireless Receiving

Receiving

Receiving Host

Host

Based on HB-2020A host, HB-2020

host increases functions as

follows:

�It can automatically dial six groups of pre-set telephone numbers

and two groups of pre-set telephone numbers provided by

ADEMCO CID Centre when alarming.

�The pre-set telephone numbers can be dialed 3-9 times .

�It rushes to inform you alarm message by cutting off your present

call-in.

�It has dial pause function, and is compatible with built-in

exchange system.

�It can receive long distance alarm calls.

�Telephone line short circuit or cut-off report function can be

opened/closed.

�It can learn the code with a remote controller.

IV.

Name

Name and

and

and Usage

Usage

Usage of

of Main

Main

Main Parts

Parts

Schematic

Schematic Diagram

Diagram

Diagram of

of Front

Front

Front Panel

Panel

①“ < ” key: It is used to complete setup function together with

“ Function ” key.

②“ Function ” key: Press “ Function ” key to switch between

setup functions. Please refer to “ Operating Instructions ” Section for

specific operations.

③“>

>” key: It is used to complete setup function together with

“ Function ” key.

④“ Reset ” key: When alarm occurs, press this key to stop

alarming, and alarm message will be automatically kept

record. For

HB-2020-C wireless receiving host, when alarm occurs, press this key

to stop alarming, and at the same time to stop dialing pre-set

telephone numbers. When entering into setup mode, press this key to

exit. When telephone line short circuit or cut-off alarm function

occurs, press this key to stop this function, or press this key again or

reset/power off the host to reactivate this function.

⑤

Time

Display: It is usually used to show time through a

flashing second lamp. When alarm occurs,

is used to display alarm

reception time through a completely

lit

second lamp. When entering

setup mode,

is used to display setup contents through a completely

lit

second lamp.

⑥Orientation Display: It is usually used to display clock

seconds. When an alarm occurs,

is used to indicate alarm location

defense area. “E1 ”means the host enclosure has been dismantled.

When entering into setup mode,

is used to display function setup

items.

⑦Failure Indicator: There are two types of failure indicators,

namely Low

Voltage

Indicator and Invalid Operation Indicator. When

the failure occurs,the failure time and defense zone No. will be

displayed on the panel.

Note:

Note: This

This

This host

host

host has

has

has enclosure

enclosure

enclosure protection

protection

protection function.

function.

function. Once

Once

Once the

the

host

host enclosure

enclosure

enclosure is

is dismantled,

dismantled,

dismantled, the

the

the host

host

host will

will

will give

give

give out

out

out an

an alarm

alarm

alarm sound

sound

immediately.

immediately. It

It is

is normal

normal

normal when

when

when the

the

the screen

screen

screen slightly

slightly

slightly flashes.

flashes.

Schematic

Schematic Diagram

Diagram

Diagram of

of Rear

Rear

Rear Panel

Panel

①Output Interface: It is provided with a group of normally

opened relay output, a group of normally closed relay output and a

group of uncontrolled DC +12V 300mA output.

Normally Opened/Closed Relay Output Interfaces: There is a

“ ” mark on the rear panel of the wireless receiving host. The relay

output of the wireless receiving host supports contact rating of

120VAC

30VDC, which is applied to control other equipments

when an alarm occurs. When the power of the controlled equipment is

larger than contact rating,

is not allowed to directly connect the

controlled equipment with this interface, but to adopt middle relay to

avoid damaging the host.

DC Output Interface: V+ and C terminals provide other devices

with +12V-13.8V300mA DC output voltage. V+ terminal is DC

output anode, while C terminal is DC output cathode, namely power

supply source of the entire host. Warning:External power-supply

device must less than 300mA,or

results the damage of host.

②DC Battery Input

The polarity of 12V external backup

battery input terminal is . When the host needs larger capacity

battery, this interface is used to connect backup battery. This interface

is equipped with a self-charge device and can automatically switch

between AC and DC.

Avoid

short circuit occurs

this interface. If

build-in backup battery is adopted, this interface should not be

connected with power supply.

③Power Switch: When the backup battery switch is turned off,

will stop working, but backup battery will self charge with AC

power.

④Phone Set-up: Hold down the “ Phone Set-up ” key for 2.5s to

switch to the programmable device of dialling module. Please refer to

relevant parts

“ Operating Instructions ” Section for specific

operations.

⑤Fuse socket

AC power fuse is equipped with AC250V 0.1A

fuse tube.

⑥AC Power Line

This host adopts 220V 50HZ AC power

supply.

⑦Internal p hone Jack: It is connected with a user telephone.

⑥ External wire Jack

It is connected with local phone wire

Interface Performance and System Connection

V+

Terminal: Anode of 12V~13.8V DC voltage output

C Terminal: Cathode of 12V~13.8V DC voltage output, namely

circuit ground.

DC Input: If build-in backup battery has been selected, the host is

not required to connect with external backup battery.

Siren

active siren is adopted, which will not affect the

operation of built-in speaker

the wireless receiving host. The siren

is optional according to specific requirements.

Wiring

Wiring connection

connection

connection is

is shown

shown

shown as

as the

the

the Figure

Figure

Figure below.

below.

VI.

VI. System

System

System Installation

Installation

1. Basic Requirements of System Installation

①During installation, suitable types and models of defense

products should be adopted according to user

’

s requirements for

defense areas.

②The installation location, angle and height of defense products

shall be determined according to the effective defense zone of defense

products and site conditions. The defense products shall be installed

hidden locations as much as possible which must be

compliance

with defense requirements.

③The type of defense zones

each location should be labeled

on the orientation drawing.

④The orientation drawing should be archived for system

maintenance.

2. System

System

System Installation

Installation

Installation and

and

and Debugging

Debugging

－－ The wireless receiving host should be placed on a table which is

near to window as far as possible.

－－ The wireless receiving host has no explosion-proof function,

which cannot be directly installed

Class I, II or III hazardous

locations ( i.e. locations where ignitable concentration of flammable,

explosive vapor/gas, dust or fiber exists), otherwise,

may cause any

hazard.

－－ In order to ensure excellent operating performance of the

wireless receive host, neither should the host share the same power

supply with

TV,

microwave oven and other major high-radiation

devices, nor should

be close to these devices.

the same time, the

antenna of the wireless receive host should be pulled out.

VII.

VII. Operating

Operating

Operating Instructions

Instructions

1. Prompt Sound

(1) HB-2020-A Wireless Receiving Host

long “ beep ” sound is given out when

is powered on, which

means system self-test is normal.

(2) HB-2020C

HB-2020C

HB-2020C Wireless Receiving Host

long “ beep ” sound is given out when

is powered on, which

means system self-test is normal.

“ beep ” sound is given out every second, which means an alarm

occurs when telephone line is cut-off.

2. How

How

How to

to Program

Program

Program HB-2020

HB-2020

HB-2020 Wireless

Wireless

Wireless Receiving

Receiving

Receiving Host

Host

After the host is powered on, the screen of the wireless receiving

host will show “ 12:00 00 ” through a

lit

second lamp, and the last two

digits on the screen represent the number of seconds. Press the

“ Function ” key to enter into the setup mode, and at the same time, the

second lamp is continuously on and the last two digits on the screen

flash through which function menu can be set.

this time, the

wireless receiving host can not receive any wireless signal from

wireless detector. In setup mode, press the “ Function ” key to switch

among different functions. And press the “ Reset ” key to exit the setup

mode. In setup mode,

there is no operation within 30 seconds, the

system will automatically exit the setup mode and return back to time

display mode.

Ce manuel convient aux modèles suivants

Autres manuels HENGBO Système de sécurité

HENGBO

HENGBO HB-A380 Manuel utilisateur

Manuels Système de sécurité populaires d'autres marques

Inner Range

Inner Range Concept 2000 Manuel utilisateur

Climax

Climax Mobile Lite R32 Instructions de montage

CADDX

CADDX NX-6 Manuel utilisateur

FBII

FBII XL-31 Series Manuel utilisateur

Johnson Controls

Johnson Controls PENN Connected PC10 Manuel utilisateur

Aeotec

Aeotec Siren Gen5 Manuel utilisateur

Blaupunkt

Blaupunkt SA 2700 Manuel utilisateur

IDEAL

IDEAL Accenta Manuel du propriétaire

AJAX

AJAX DoubleButton Manuel utilisateur

Swann

Swann SW-P-MC2 Manuel utilisateur

Ecolink

Ecolink Siren+Chime Manuel utilisateur

Digital Monitoring Products

Digital Monitoring Products XR150 Manuel utilisateur

EDM

EDM Solution 6+6 Wireless-AE Manuel utilisateur

Highway Safety Group

Highway Safety Group EA401 Manuel utilisateur

Siren

Siren LED GSM Manuel utilisateur

Detection Systems

Detection Systems 7090i Instructions de montage

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Manuel utilisateur

Siemens

Siemens FDM273 Manuel utilisateur