Helo BioSense Manuel utilisateur
QUICK
START
GUIDE
BioSense
health band
1
Packing List
The box contains the following items
BioSense
health band
USB C cable
Charging Base
BioSense
health band
2
1
Input voltage: 5V DC.
Charging time: about 2 hours.
How to charge
1. Plug the USB C cable into the socket on the charger base
2. Place the BioSense onto the charging base, aligning the metal contacts on the back ofthe
band with the gold pins on the charging base. This will line up the magnets in thecorrect
direction
3. Place the charge on a flat surface with the BioSense sideways
BioSense
health band
2
3
2
How to use
1. APP Download
Download the HELO Smart App from the App Store, Google Play Store, or HELO App STORE.
Note: To use “HELO Smart App” on an iPad, you need to select “iPhone only” when
downloading it from the App Store.
2. Initial Setup
The first time you use your device, place it on the charging base after it has been removed
from the box. Once the green LED lights up, you can connect your device to the app.
3. Power On
When the Band is powered off, press and hold the touch button for 5 seconds to power
on the device. Additionally, when the Band is powered off and placed on the charger, the
device will power on.
4. Power Off
When the app is connected to the device, click “Turn off the band” into the app to
shutdown.
5. Start Measurements
Initiate BP/SpO2 measurements through the device: When the Band is powered on,
quickly double-click the touch button, and the dark blue light will flicker, indicating that the
initiation is successful. Touch the finger sensor to measure. Upon completion, the light
turns off, and the dark blue light flickers. A red light will flicker if the measurement fails.
Through the App
: When the App is connected to the device, select the health function
then click “Measurement”, and the blue light flickers, indicating that the initiation is
successful.
6. Restart
When the Band is powered on, press and hold the touch button for 10 seconds to enter the
restart mode (red light flicker), double-click the touch button within 5 seconds to confirm
the restart (shut down first, then power on). If the touch button is not double-clicked for
more than 5 seconds, the Band will automatically exit the restart mode, and the red light
will stop flickering.
7. Reset
When the app is connected to the device, click “Reset the band” in the app to shut it down.
All the data not yet synchronized will be lost.
BioSense
health band
1
2
4
2
3
5
1 6
2 7
3 8
94
5
7
8
6
9
7
6
Power ON button
ECG & BIA electrodes
LED light
BP, SpO2, APG sensor
Built-in VyvoPay chip
ECG contact plates
Charger pins
6-Axis Gyroscope
Skin temperature, continuos AFIB,
continuos HR, SpO2 sensors
TOP view BOTTOM view
8. Guardian
The red light will blink for 10 seconds, then stop. To see the values connected to the
Guardian Alerts open the HELO App.
9. Compatibility & Support
Support Android 5.0 or above, iOS 10.0 or above.
10. Connection
After finishing the download, open the App and register by opening an account, then
complete the connection process according to the operating instructions on the App.
11. Check Connection Status
Touching the button once will make the LED light flicker twice. The light will flicker light
blue if the device is connected - green if not connected.
3
Introduction for important features
Heart rate monitoring
To monitor heart rate more accurately, please wear the band approximately one finger’s
length away from the wrist bone.
BioSense
health band
4
More information
Waterproofing instructions
The BioSense’s waterproof rating is IP68 (50m).
NOTE
1.
BioSense is only suitable for swimming. If you wear BioSense while diving, it may cause
damage to the device. Such damage is not within the scope of the device’s warranty.
2.
While wearing the device, swim, shower, and wash hands only under cold water.
3.
BioSense does not have a waterproofing effect for other liquids like acids and alkaline
solutions, chemical reagents, and other corrosive liquids. If you inadvertently encounter or
are in contact with a corrosive liquid, please make sure to clean with clean water and dry
the device. The damage caused due to improper use or abuse of the device is not within
the scope of the device’s warranty.
BioSense
health band
5
Tech Sheet
HARDWARE and SOFTWARE specication
Process
description
1.Wristband material: liquid silica gel + PA two-color coating,surface drying pattern +
UV modication, built-in magnet adsorption
2.Heart electrode: stainless steel 316L + pvd gold
3.Bottom shell: PA embedded 2 pieces of 316L stainless steel + PVD + 2PCS POGO pin
Basic
specication
size 226*20*7.5 mm.
weight 22 gr.
color Black/Grey Strap with Gold or Silver
Electrode & Closure
Hardware
specication
MCU GOODIX5515--ARM Cortex-M4 64MHZ
built-in storage RAM: 256KB,ROM: 1Mbit,external 8MB
Compatibility iOS 10.0 or above,Android 5.0 or above
display ---
resolution ---
touch Capacity touch
button ABS touch button
Connection
bluetooth BLE 5.0
WIFI ---
NFC Support VyvoPay
Sensors
G-Sensor Bosch BMA421
Gyro STK LSM6DS3TR-C,ST
BIA Maxim 30001
Fingertip blood oxygen + blood
pressure Maxim 30101+32664
Body Temp Nano core micro NST117
ECG+Heart rate Maxim 30001
BioSense
health band
Table des matières
