15
Verify that the number on the display is
correct, then press the STORE button
again.TheMemory indicator (“MEM”)
will appear in the display.
Press the number “1” button to store the
displayednumber in memorylocation 1.
Repeat steps 1 through 4 to store up to
nineadditional numbers in memories“2”
through“0”
TOCHANGEASTORED NUMBER:
To change one of the stored numbers, simply follow the procedures in steps 1
through5 and entera new phonenumber in thedesired memory.Thenew phone
numberwill be memorizedand the previousphone number willbe erased fromthe
memory.
NOTE:Foryour convenience, youmay write thenames of thepeople whose numbers
you stored on the small index card in the center of the cradle.
MESSAGEWAITING FUNCTION
Lift the handset and listen for a dial
tone. Press the MEMO button and then press
oneof the numberkeys, “1” through“0”,
correspondingto the memorylocation
you want to dial. The stored number will
bedialed automatically.
TO REDIAL A STORED NUMBER
BASIC OPERATIONS (CONTINUED)
When a caller has recorded a message
on a personal message service, “ ”
will appear in the display and will go out
whenyouretrieve your message.
This feature is only for subscribers of
a voice mail message waiting
service through the local phone
company.
VIEWING THE CALLER ID MEMORY
Toview the newcalls (NEW CALL
indicator will blink), press the [▼] or [▲]
button. As they are checked, the CALL
# will decrease.
Whenall newcalls have beenchecked,
“END OF NEW CALL” will appear in the
display. Press the [▼] to view the oldest
calls or the [▲] button to view the most
recent calls.
NOTES:
•After all calls are viewed, “END OF LIST” will appear in the display.
•The NEW CALL indicator will blink until all new caller ID information has been
reviewed.
•TheRPT iconwill appear inthe display ifyou have received multiple newcalls from
thesame number.
•Ifyou receivea call froma number previouslyviewed in thecaller ID memory,the
data in memory will be replaced with the new call’s time and date, and the NEW icon
will light in the display.
•If no key is pressed within 20 seconds, the display will revert to normal display and
show the total call counter, new call counter, current time and date.
ERASINGTHE CALLER ID MEMORY
To erase a single call, press the [▼] or
[▲] button to select the call to delete,
then press the ERASE button twice
quickly. The information for that call will
be erased and the call # and caller ID
datawill be updated.
ALL NEW CALLS MUST BE
REVIEWEDBEFORE ERASING
CALLER ID MEMORY. Toerase all calls
in caller ID memory, press and hold the
ERASEbutton for threeseconds. The
message “ERASE ALL CALLS” will
appear in the display. Press the ERASE
button again to confirm. All caller ID
informationwillbe deleted and“NO
CALLS” will appear in the display.
16
BASIC OPERATIONS (CONTINUED)
