HELLER H91F Manuel utilisateur
Instruction Manual
91L Bar Freezer
Model No.: H91F
Read this instruction manual before using your product for the rst time.
Ensure you save this manual in a safe place for future reference.
Safety Information
In the interest of your safety and to ensure correct use of the product, before installing
and rst using the appliance, read this instruction manual carefully, including hints and
warning. To avoid potential hazards or accidents, it is important to ensure that all people
using this appliance are thoroughly familiar with the safety features and operation of the
product. Save these instructions for future reference, and ensure that it remains with the
appliance should it be moved or sold so that everyone using the appliance through its life
will be properly informed of the usage and safety precautions regarding this product.
To ensure safe use and for the safety of life and property, retain the precautions men-
tioned in this instruction manual, as the manufacturer is not responsible for damages
caused by omission.
Safety of children and vulnerable person(s)
• This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge unless
they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.
• Cleaning and user maintenance shall not be performed by children.
• Keep all packaging away from children as there is a risk of suocation.
• If you are discarding the appliance, pull the plug out of the socket, cut the connection
cable (as close to the appliance as you can) and remove the door to avoid playing
children to suer from potential electric shock or closing themselves into the
appliance.
• If this appliance which features a magnetic door seal is to replace an older appliance
which features a spring lock (latch) on the door of lid, be sure to make the spring lock
unusable before you discard the old appliance. This will prevent the spring lock be-
coming a potentially lethal hazard for children.
Safety of children and vulnerable person(s)
WARNING! Keep ventilation openings, both inside the appliance enclosure or in the
built-in structure, clear of obstruction.
WARNING! Do not use mechanical devices or other means to accelerate the
defrosting process, other than those recommended by the manufacturer.
WARNING! Do not damage the refrigerant circuit.
WARNING! Do not use other electrical appliances (such as ice cream makers) inside
of refrigerating appliances, unless they are approved for this purpose by the
manufacturer.
Safety Information
WARNING! Do not touch the light bulb if it has been on for an extended period of
time as it can become very hot.
• Do not store explosive substances such as aerosol cans with a ammable propellant
in this appliance.
• The refrigerant isobutane (R600a) is contained within the refrigerant circuit of the ap-
pliance, a natural gas with a high level of environmental compatibility, however is also
extremely ammable.
• During transportation and installation of the appliance, ensure that none of the
components of the refrigerant circuit become damaged.
• Avoid open ames and sources of ignition.
• Thoroughly ventilate the room in which the appliance is situated.
• It is dangerous to alter the specications or modify this product in any way. Any
damage to the cord may cause a short circuit, re and/or electric shock.
• This appliance is intended to be used in household and similar applications such as
- Sta kitchen areas in shops, oces and other working environments
- Farm houses and by clients in hotels, motels and other residential type
environments:
- Bed and breakfast type environments
- Catering and similar non-retail applications
WARNING! Any electrical components (plug, power cord, compressor and etc.) must
be replaced by a certied service agent or qualied service personnel. If the supply
cord is damaged, it must be replaced by the manufacturer, its service agent or simi-
larly qualied persons in order to avoid a hazard.
WARNING! The light bulb supplied with this appliance is a special light bulb
specically designed to be used only with the appliance supplied. This special light
bulb is not usable for domestic lighting.
• The power cord must not be lengthened.
• Ensure the power plug is not squashed or damaged by the back of the appliance. A
squashed or damaged power plug may overheat and cause a re.
• Ensure you have access to the main plug of the appliance in all positions.
• Do not pull the main plug cable.
• If the power plug socket is loose, do not insert the power plug. There is a risk of
electric shock or re.
• You must not operate the appliance without the lamp.
• This appliance is heavy. Care should be taken when moving it.
• Do not remove nor touch items from the freezer component if your hands are damp or
wet, as this could cause skin abrasions or frost/freezer burns.
• Avoid prolonged exposure of the appliance to direct sunlight.
Safety Information
Daily Use
• Do not let hot items to come into contact with the plastic parts and components of the
appliance.
• Do not place food products directly against the rear wall.
• Frozen food must not be re-frozen once it has been thawed out.
• Store pre-packed frozen food in accordance with the frozen food manufacturer’s
instructions.
• The appliance’s manufacturer’s storage recommendations should be strictly adhered
to. Refer to relevant instructions.
• Do not place carbonated or zzy drinks in the freezer compartment as it creates
pressure in the container, which may cause it to explode, resulting in damage to the
appliance.
• Ice lollies can cause frost burns if consumed straight from the appliance.
Care and Cleaning
• Before maintenance, switch o the appliance and disconnect the mains plug from the
mains socket.
• Do not clean the appliance with metal objects.
• Do not use sharp objects to remove frost from the appliance. Use a plastic scraper.
• Regularly examine the drain in the refrigerator for defrosted water. If necessary, clean
the drain. If the drain is blocked, water will collect at the bottom of the appliance.
Installation
• Unpack the appliance and check if there are any damages inside and outside of the
appliance. Do not connect the appliance if it is damaged.
• It is advisable to wait at least four hours before connecting the appliance to allow the
oil to ow back in the compressor.
• Adequate air circulation must be around the appliance at all times, or else it may lead
to overheating. To achieve sucient ventilation follow the instructions relevant to
installation.
• Wherever possible the spaces of the product should be against a wall to avoid touch-
ing or making any contact with warm parts (compressor, condenser) to prevent
possible burns.
• The appliance must not be located close to radiators or cookers.
• Make sure that the mains plug is accessible after installation of the appliance.
IMPORTANT! For electrical connection, carefully follow the instructions given in
specic paragraphs.
Safety Information
Service
• Any electrical work required to service the appliance should be carried out by a
qualied electrician or certied personnel.
• This product must be serviced by an authorised service center, and only genuine
spare parts must be used.
• It is hazardous for anyone other than an Authorised Service Person to service this
appliance. In Queensland - the authorised service person MUST hold a Gas Work
Authorisation for hydrocarbon refrigerants to carry out servicing or repairs which
involve the removal of covers.
Energy Saving
• Do not put hot food in the appliance.
• Do not pack food close together as this prevents air circulating through the appliance.
• Make sure food does not touch the back of the compartment(s).
• If no electricity is powering the fridge, do not open the door(s).
• Do not open the door(s) frequently.
• Do not keep the door(s) open for extended periods of time.
• Do not set the thermostat on exceedingly low temperatures as frost may build up.
• Some accessories such as drawers, can be removed to get larger storage volumes
and lower energy consumption.
Environment Protection
This appliance does not contain gases which could damage the ozone layer, in both the
refrigerant circuit or insulation materials. The appliance shall not be discarded together
with urban refuse and rubbish. The insulation foam contains ammable gases: the
appliance shall be disposed according to the appliance regulations provided by your local
council. Avoid damaging the cooling unit, especially the heat exchanger. The materials
used on this appliance marked by the are recyclable.
This symbol (left) on the product or on its packaging indicates that this product may
not be treated as household waste. Instead, it should be taken to the appropriate
collection point for the recycling of electrical and electronic equipment. By ensuring this
product is disposed of correctly you will help prevent potential negative consequences for
the environment and human health, which could otherwise be caused by inappropriate
waste handling of this product. For more detailed information about recycling this product,
please contact your local council, your household waste disposal service or the store in
which the appliance was purchased.
Packaging materials
The materials with the symbol are recyclable. Dispose the packaging in a suitable
collection point or container to recycle it.
Disposal of the appliance
1. Disconnect the mains plug from the mains socket.
2. Cut o the mains cable as close to the appliance as possible and discard it.
Overview
Note: The above diagram is meant for reference only. Actual appliance may be dierent.
Reverse Door
Tool(s) required: Phillips screwdriver, Flat-bladed screwdriver, Hexagonal spanner
• Ensure the unit is unplugged and empty.
• To remove the door, it is necessary to tilt the unit backwards. It is highly recommended
to rest the unit on something solid, so that the appliance will not slip during the door
reversing process.
• All parts must be removed must be stored to perform re-installation of the door.
• Do not lay the unit at as this may damage the coolant system.
• It is recommended for 2 people to handle the unit during assembly.
1. Remove the two screw positioned at the rear side of
the top cover.
2. Remove the top cover and thermostat knob then
place it aside.
3. Unscrew top hinge and remove the door and place it
on a soft surface or similar surface to prevent scratches
and damage.
Reverse Door
4. Unscrew the bottom hinge. Then, remove the
adjustable feet from both sides (1).
5. Remove the top cover and thermostat knob then place it aside.
6. Ret the bracket belonging to the bottom hinge pin.
Replace both adjustable feet.
7. Place the door back on. Ensure the door is aligned
horizontally and vertically so that the seals are properly
closed on all sides before nally tightening the top hinge.
Reverse Door
8. Return the top cover to its original position and x it
with the 2 screws that were previously removed.
9. Fix the thermostat knob.
Installation
Space Requirement
• Ensure there is enough space for the door to
open.
• Ensure there is at least a 50mm gap around
both sides of the appliance.
Levelling the Unit
To level the appliance, adjust the two levelling
feet located at the front of the appliance.
If the unit is not level, the doors and magnetic
seal alignments will not function as intended.
Installation
Positioning
Install this appliance at a location where the ambient temperature corresponds to the
climate class indicated on the rating place of the appliance.
Location
The appliance should be installed a safe distance away from sources of heat such as
radiators, boilers, direct sunlight etc. Ensure that air can circulate freely around the back
of the cabinet. To ensure optimal performance, if the appliance is positioned below an
overhanging wall unit, the minimum distance between the top of the cabinet and the wall
unit must be at least 100mm. Ideally, however, the appliance should not be positioned
below overhanging wall units. Accurate leveling is ensured by one or more adjustable feet
at the base of the cabinet.
Warning! It must be possible to disconnect the appliance from the mains power supply; the plug must
there be easily accessible after installation.
Electrical connection
Before plugging in, ensure that the voltage and frequency shown on the rating plate corre-
spond to your domestic power supply. The appliance must be earthed. The power supply
cable plug is provided with a contact for this purpose. If the domestic power supply socket
is not earthed, connect the appliance to a separate earth in compliance with current regu-
lations, consulting a qualied electrician.
The manufacturer declines all responsibility if the above safety precautions are not ob-
served. This appliance complies with the E.E.C. Directives.
Table des matières
Autres manuels HELLER Congélateur
