6 HD-650
Pairing HD-650 with Bluetooth Device
zTo put the HD-650 into pairing mode,
ensure the device is off and then click and
hold MFB continuously until LED starts an
alternating red and blue flash. The pairing
mode will last for 3 minutes, after which
time the HD-650 returns to standby mode.
zEnsure you have the headset successfully
into pairing mode, and then search for the
headset from your Bluetooth device. For
specific instructions on how to search for
Bluetooth devices form your mobile phone
please consult your phones instruction
manual. If prompted for a pin number
please enter ‘0000’. Once successfully
connected, the LED will turn OFF.
Switching the HD-650 ON/OFF
zTo switch on the HD-650, click and hold
MFB until the headset LED lights up blue.
zTo switch off the HD-650 click and hold
MFB until Headset LED lights up red and
then turns OFF.
Wearing the HD-650
zThe headset can be worn on either the left
or right ear. Try the headset with each size
of ear gel, and select the size that
provides the most secure, comfortable fit.
zPlace the headset into your ear and adjust
so that the rubber ear gel holds the
headset comfortably within your ear.
zWhen the headset is not in use, you may
clip it onto the phone connector knot or
necklace provided.
www.heliumdigital.com
