HELGI IFP V Series Manuel utilisateur

HELGI V-SERIES
Interactive Flat Panel
USER MANUAL
HELGI - The Digital Courtyard Via Artigiani 29/31 29020 Vigolzone (PC) Italy
HELGI IFP V SERIES

HELGI - The Digital Courtyard Via Artigiani 29/31 29020 Vigolzone (PC) Italy
HELGI IFP V SERIES
USER GUIDE
Safety Warning
Safety Warning
Positioning
Do not put heavy objects on top of the unit.
Do not put the unit near appliances that generate magnetic fields.
Do not expose the unit to direct sunlight and other sources of heat.
Do not place the unit on an unstable cart, stand, tripod, bracket, table, or shelf.
Do not put any liquid near or on the unit, make sure do not spill any liquid inside the unit.
Power Supply
Please keep power cable from physical or mechanical damage.
Please check and ensure AC source is connected with the ground.
This power cable comes with the device exclusively for this device only.
Please unplug power supply when the weather is thunder-storm or lightning.
Check that the unit’s operating voltage is identical with your local power supply.
Please use the original power cable from the accessory bag, don’t modify or lengthen it.
Please unplug power supply, when there is nobody home or the unit will be in idle for a long time.
LED Screen
Unplug the power cable before cleaning. Clean the screen with a soft, dustless and dry cloth.
For deep clean, please contact an authorized service center. Never use water or the spray type detergent to clean the unit.
Never use any other hard or sharp object to replace the touch pen. Better for the panel lifetime and the display performance, do not
display high brightness image for long time.
Temperature
Normal operating temperature is 0 ~ 40°C.
Do not place the unit near or over a radiator or a heater.
If your unit is suddenly moved from a cold to a warm place, please unplug the power
cable and do not turn it on at least 2 hours, making sure the moisture inside the unit is all evaporated.
Humidity
Do not expose the unit in rain, or place in high humidity area.
Please make sure indoor environment is dry and cool. Normal operating humidity is
10%~90%RH.
Ventilation
Please put the unit in a well-ventilated place, so the heating can be released easily.
Ensure that the unit has enough space for ventilation. Space requirement: left, right and
back >10cm, top> 20cm.
Earphones
Before using earphone, please turn down the volume in advance.
Using the earphone to listen loud sound for a long time might affect the hearing.
Standby
It will enter standby mode but not turn off the unit after press the standby key.
Battery
Please make sure the battery gets proper disposal or recycle after using.
Please keep the battery away from kids and don’t throw the battery into fire.
Notes for Cleaning
There are vents on back cover, please do not use any liquid or spray directly during
Power Switch Status Signs
“I” means power on, “O” means power off.
Notes for Maintenance
This machine can only be maintained by certified engineer.

HELGI - The Digital Courtyard Via Artigiani 29/31 29020 Vigolzone (PC) Italy
3
HELGI IFP V SERIES
USER GUIDE
Control Panel
Control Panel
Number Items Function description
1Magnetic zone Area for placing the adsorptive magnetic pen
2Tap to enter Energy Saving Function Press at least 2 seconds to enter standby mode
3Power Indicator Light Open the power supply when the power indicator light is Always is normal
4Remote control signal
receiver Do not place any object in front of the IR signal receiver, otherwise the remote control will not work
5USB USB interface for Android operating system and integrated mini PC
1. Prepare to Install

HELGI - The Digital Courtyard Via Artigiani 29/31 29020 Vigolzone (PC) Italy
HELGI IFP V SERIES
USER GUIDE
Installation
Number Item Function description
1VGA Analog video input
2 AUDIO IN External computer audio input
3 SPDIF Sony/Philips Digital Interface, for transmitting the audio signal via an optical signal
4 RS232 Serial interface for data transfer between devices
5 AUDIO OUT Audio output for external speakers
6 LAN RJ45 terminal input
72.0 USB 2.0 input for connecting external memory units, keyboard and mouse, etc.
8 HDMI OUT HDMI digital video output
93.0 High-speed USB 3.0 input for connecting external memory drives.
10 TOUCH Touch output for external PC.
11 HDMI IN High-definition multimedia interface signal input for the transmission of digital audio-video signal from external sources
(PC or other types of sources with digital output)
12 ACSWITCH Main Power Button - “I” to turn on, “O” to turn off
13 AC IN AC power supply
65”
75”/86” inches
2. I/O Interface
2. I/O Interface
NOTICE: The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of
HDMI Licensing LLC in the United States and other countries

HELGI - The Digital Courtyard Via Artigiani 29/31 29020 Vigolzone (PC) Italy
5
HELGI IFP V SERIES
USER GUIDE
Remote control
3. Remote control
1) Remote control button functions

HELGI - The Digital Courtyard Via Artigiani 29/31 29020 Vigolzone (PC) Italy
HELGI IFP V SERIES
USER GUIDE
Control Panel
3. Control Panel
Detailed Function Description
1
2
3
4Space
5
Alt+F4 :
Alt+Tab :
6
Numeric keys :7
Display8
9
Input10
Home11
Menu12
Red13
Green14
Yellow15
Blue16
17
18
19
20
21
22
23 Enter
24
25 Back
26 PgUp
27 PgDn
28 CH.+ \ CH-.:
29 VOL+ \ VOL-:
30 F1-F12:
Power on/off
Mute switch
Built-in computer Windows key
Built-in computer Space key
Built-in computer space bar Alt + Tab
Built-in computer program window close button
Numeric input keys
Display channel information
Non-function
Input signal source selection key, choose
Android system main screen button
Setting menu button, press this button to pop
Lock and unlock Buttons and Touch function
Lock and unlock Buttons function
Lock and unlock Touch function
Freeze and zoom
One key for blank screen
Backspace key
Direction key, press this button for upwards
Direction key, press this button for left selection
Direction key, press this button for right
Direction key, press this button for downwards
Confirmation key, press this key to confirm selection state
Quickly start writing software
Return key
Built-in computer page (previous page)
Built-in computer page (next page)
Channel switch key
Volume switch key
Built-in computer F1 - F12 function keys
NOTE: All computer - related function keys are not available without a built-in computer.

HELGI - The Digital Courtyard Via Artigiani 29/31 29020 Vigolzone (PC) Italy
7
HELGI IFP V SERIES
USER GUIDE
Control Panel
3. Remote Control Instruction
Install Batteries
1) Open back cover of battery component on the back of remote control.
2) Install AAA type battery according to the corresponding electrode, make sure battery positive and negative pole are correct
(“+”to”+”, “-” to “-”), please do not mix using old and new batteries.
3) After battery is installed, close the back cover of battery components, and make the following clip
buckled to the bottom.
Remote control can work normally within the range of 8 meters
distance, 30 degrees left and right from the remote-control receiver;
in order to protect environment, please dispose waste battery into
recycling box.
Range of remote control

HELGI - The Digital Courtyard Via Artigiani 29/31 29020 Vigolzone (PC) Italy
HELGI IFP V SERIES
USER GUIDE
I/O Connections
1. External Computer Connection
1) Use VGA cable to connect to VGA output port of external computer, and meanwhile use
headphone audio cable to connect to external computer audio output interface. (Or use HDMI
cable to connect to HDMI output port of external computer).
2) Use USB cable to connect to external computer USB port.
3) After cable connection, plug in power cord, and switch power on.
4) Start external computer.
5) Press key, and the equipment is power on.
6) Press the INPUT key to switch to VGA/HDMI channel
Recommended computer configuration:
1GB Available Hard Drive, 2.0GHz Processor, 1GB Memory, More than 256 color display cards, VGA OUT / HDMI OUT, Audio-OUT, USB
Interface, Support Resolution 800*600,1024*768,1920*1080,3840*2160
1) Use HDMI cable to connect audio and video equipment with HDMI output.
2) After cable connection, plug in power cord, and switch power on.
3) Press to turn equipment on.
4) Press INPUT key to switch to HDMI port.
Connection and Setting
2. Input from external AV players

HELGI - The Digital Courtyard Via Artigiani 29/31 29020 Vigolzone (PC) Italy
9
HELGI IFP V SERIES
USER GUIDE
I/O Connections
3. Video Output Connection
4. USB Connection
5. RS232 Connection
1) Use HDMI cable to connect display device with HDMI IN.
2) After cable connection, plug in power cord, and switch power on.
3) Press to turn equipment on.
4) The connected display device outputs the current frame of the interactive intelligent Panel.
After using serial port cable to connect central control equipment and machine, certain function of the machine can be controlled via
central control equipment, such as: machine ON/OFF, and adjustment of sound volume, etc.

HELGI - The Digital Courtyard Via Artigiani 29/31 29020 Vigolzone (PC) Italy
HELGI IFP V SERIES
USER GUIDE
Connection and Setting
6. LAN Connection
6. TF Card
Autres manuels pour IFP V Series
1
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels HELGI Moniteur


















