10
The Hegel Mohican can be controlled with
the included Hegel RC2 Remote Control.
The Hegel system remote control controls
other Hegel products, such as amplifiers
and preamplifiers, avoiding the need for
multiple remote control devices.
To avoid damage to the remote control by
leakage from the batteries during transport
and storage, the remote control is supplied
without batteries from Hegel.
The remote control uses two standard
1.5-volt LR03 AAA batteries. To insert the
batteries, use a crosshead (Phillips) screw-
driver to gently remove the four screws on
the underside of the remote control.
Insert the batteries with the correct polarity
with + sign and – sign, as shown inside the
battery holder. Be careful when inserting the
batteries to not damage the battery holder.
Replace the cover. Insert the screws by gen-
tly turning them by hand, to avoid damaging
the threads in the remote control chassis.
Do not tighten the screws too much, as this
can damage the screws and the soft metal
chassis of the remote control.
Caution: Do not drop the remote control
on the floor, as this can damage its internal
parts and the battery holder.
Remote Control - RC2
Remote Control Buttons (starting top left)
1. Play/Pause
2. Skip to previous track
3. Skip to next track
4. Stop/Eject
5. Rewind the track
6. Forward the track
7. Volume up for Hegel Amp and Preamp
8. Repeat track or CD
9. Switch to next input on your Hegel Amp and Preamp
10. Volume down for Hegel Amp and Preamp
11. Mute the Hegel Amp and Preamp
12. Switch to prev. input on your Hegel Amp and Preamp
