FCC RF
INTERFERENCE STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television receptions, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-. Reorient or relocate the receiving antenna.
-. Increase the separation between the equipment receiver.
-. Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
-. Consult the or an experienced radio /TV technician for help.
CAUTION: Any changes or modifications not expressly approved by the
party responsible for compliance could void the user’s authority
to operate the equipment.
CE MARKING DECLARATION OF CONFORMITY
This LCD Monitor complies with the requirements of the EC Directive 89/336/EEC”EMC Directive”
and 93/42/EEC - Medical Device directive
The electro-magnetic susceptibility has been chosen at a level that gives correct operation in
residential areas. Business and light industrial premises and small-scale enterprises, inside as well
as outside of the buildings. All places of operation are characterized by connection to the public low
voltage power supply system.
Classification:
- Protection against electric shock: Class I
- Applied Parts No Applied Parts.
- Protection against harmful ingress of water: ordinary IPX0
- Mode of operation: Continuous
- Degree of safety in the presence of flammable anesthetics mixture with air or with oxygen
or with nitrous oxide
- Not suitable for use in the presence of a flammable anesthetics mixture with air or with
oxygen or with nitrous oxide.
Regulatory Information
