9
Installation
1. Notes
Whilst the installation of this heater is incredibly straightforward, please ensure
you read the following carefully as EV will not be liable for any damage or problems
arising from incorrect installation.
Unwrap your heater and clear the packaging away. The packaging has been specifi -
cally chosen to allow you to recycle it.
If on unpacking, you discover any damage whatsoever, please get in touch with your
supplier within 24 hours and prior to installation.
For assembly and installation, please follow the instructions as set out in this bo-
oklet.
For safety reasons, this heater should never be installed in close proximity to a bath
or shower i.e. that you could touch the controls whilst in the bath or shower.
The radiator should not be placed below a socket.
If the cable has been damaged, it can only be replaced by EV, through its Aftersales
team, or by a qualifi ed person. This ensures the user will not be in any danger.
The radiator comes fi lled with an exact amount of high density thermic oil or granu-
lated high density magnetite, depending on your model. Repairs that will require
contact with it either must be carried out by the manufacturer or an authorised
fi rm. Any leaks should be reported to one of the aforementioned.
When the radiator is being decommissioned, the legislation on the disposal of the
oil should be followed rigorously.
At the end of the manual, you will fi nd a Guarantee, please check that this has been
completed correctly, dated and stamped.
