HEATSTRIP TT-MTM2 Manuel utilisateur
PRODUCT MANUAL
TT-MTM2 Hard -Wired
Cont roller with Remote
2
TT-MTM2 Hard-Wired Controller with Remote Rev C NOV15
TT-MTM2 Wall Controller
This controller is a custom designed and manufactured controller for HEATSTRIP® heaters. It has been designed for
ease of use and to provide low running costs of your heater. It provides both temperature control (allowing the user to
turn the heat output up or down depending on the ambient temperature and conditions) and a timer for automatic
heater shut-off operation.
The timer function has four settings: 1 hour, 2 hours, 4 hours or constantly on. This feature is ideal for applications
such as BBQ, alfresco areas, restaurant dining, assembly line production etc. when continuous heat is not required.
The timer also reduces the likelihood of heaters being inadvertently left turned on.
Depending on the ambient temperature there may be a requirement to control the heat output of the heater. The
controller has 3 settings, they are High, Medium and Low.
The controller allows a combination of the multiple timer (1/2/4 hour) and heat outputs (High/Medium/Low).
The controller comes with a remote control unit which provides
convenient control of the heater power output and timer functions.
Controlling multiple heaters
It is possible to use one wall controller to control multiple heaters.
The wall controller is rated at 16 Amps and 240 volts. For a larger
current draw, talk to your electrician who can use a relay to
connect more units.
Remote pairing
All units operate using the
same remote control
frequency, therefore, multiple
wall controllers can be
operated using a single remote
control.
The remote will function at
distances of over 8m when
used in a straight line. This
distance reduces when used at
an angle.
MODEL MAXIMUM
VOLTAGE (Volts) MAXIMUM
CURRENT (Amps) PACKAGED
DIMENSIONS (mm) UNIT
WEIGHT (kg)
TT-MTM2 240 16 150 x 95 x 55 0.3
3
Operation
Press “ON/OFF” button to turn power on and off.
Once turned on, the controller will default to High power setting and will be permanently on (no timer function).
Press “POWER” button to select the desired power setting by cycling through: HIGH – MEDIUM – LOW.
When power setting is at high the controller will provide continuous power. When power setting is at “MEDIUM”
or “LOW” the output alternates between being on and off so that it delivers a lower output to the heater.
Press “TIMER” button to set the timer to 1, 2, 4 hours or permanently on. When permanently on, none of the
TIMER LED’s will be illuminated. Once the timer is selected, the timer will be started immediately. When the
timer has ended, power will turn off and all LED’s will be also turn off.
All features can be accessed using either the wall controller buttons or the remote control unit.
Thermal Cut-Out Protection
This controller is protected by a thermal cut-out switch. This switch is activated when the temperature of the con-
troller is too high. The controller will cut all power until it has sufficiently cooled. Once it cools the unit will contin-
ue working as usual.
Warm Up Mode
The controller is programmed to operate continuously (High setting) for the first 15 minutes of operation regard-
less of the selected power setting. This is to allow time for the heater to warm up. After this time it will operate as
selected.
Safety
The TT-MTM2 controller is to be mounted indoors. It needs to be away from wet conditions.
Ensure the connections are properly connected.
The controller needs to be installed according to your local wiring guidelines and regulations.
Do not allow any cables, furnishings, flammable materials or other items to obstruct the vents of the controller.
Never block the air vents of the controller.
Do not put anything in the vents of the controller.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or intellec-
tual capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety. Children should be supervised to en-
sure they do not play with the appliance.
Maintenance
The TT-MTM2 Controller is made from durable materials, however regular care and maintenance of your con-
troller will help prolong the life of the product.
It is recommended that you dust the controller to keep the surface clean. Cleaning at least every three months
will reduce the amount of dust build up and keep it looking at its best.
Do not use any abrasive materials or products to clean the controller, this includes solvents, citrus based clean-
ers or other harsh cleaning products. Do not use water or a damp cloth to clean the controller.
The remote uses a CR2025 3V lithium battery. If the red light on the remote stops working then change the bat-
tery.
4
TT-MTM2 CONTROLLER INSTALLATION GUIDE
Controller Wiring Example
The TT-MTM2 controller requires sufficient air circulation in order to provide continuous operation on the high
power load setting. The vents must remain clear at all times; never block or cover the vents.
An ideal controller installation will provide significant space around the back of the controller. Installing into
restricted spaces, such as brick walls, may result in overheating if adequate ventilation is not provided.
ACTIVE
EARTH
NEUTRAL
L
N
220-240V~
50Hz Supply
GANG
BOX
Load
16A Max
5
Heater wiring schematic diagrams
It is recommended to install an ON/OFF isolation switch before the controller and ensure the unit is turned OFF after use.
Multiple heaters can be operated using a single controller, however the maximum current rating of 16A must not be ex-
ceeded. For direct wiring to the controller, the maximum is generally one heater unit unless the combined maximum cur-
rent is less than 16A. For example, 2x THH1800A can be connected directly to the controller.
Below are example circuits indicating potential installation configurations.
Always check with your electrician and ensure all wiring is in accordance with local regulations.
6
Heater wiring schematic diagram with relays
When more heating units need to be connected from the same controller a relay will be required. It is recommended that
you talk to your electrician for more detail.
Below is an example circuit indicating one potential installation configuration.
Always check with your electrician and ensure all wiring is in accordance with local regulations.
Note to electrician: The controller modulates the heat output using a “timed on / timed off” function. The controller does
not modulate the voltage output. A relay is therefore suitable for this application.
7
Warranty Terms & Conditions
The below Warranty Terms and Conditions apply for New Zealand and Australia only. For international warranty please refer
to international warranty terms and conditions.
Thermofilm warrants to the original owner that TT-MTM2 Wall Controller products will be free from defects in materials and
workmanship for a period of 12 months from the date of purchase in accordance with the following warranty terms and
conditions.
Provision of this warranty is subject to:
The TT-MTM2 Wall Controller product must be installed in accordance with the Installation Instructions and relevant
electrical standards and codes.
The TT-MTM2 Wall Controller product must be maintained and cleaned according to instructions detailed in the
Installation Manual.
There is no warranty expressed or implied with regard to capacity requirements. The selection of the unit or units
depends entirely upon the system design and capacities as determined by the purchaser.
The customer has not repaired, opened or altered the product in any unauthorised manner.
This warranty excludes damage to the product or components arising from circumstances outside the control of
Thermofilm, including, but not limited to, where the product is not used for intended purpose; where the product has
been rectified in any way; incorrect installation; incorrect power supply; damaged caused during delivery; misapplication,
misuse, abuse, vandalism, lack of maintenance or accident.
Thermofilm’s obligations under this warranty are limited to repair or replacement at Thermofilm’s factory of any
components of the product which Thermofilm identifies to its satisfaction to be defective.
Transportation charges involved in return of the product to the Thermofilm factory (or any other location authorised in
writing by Thermofilm) is the sole responsibility of the customer.
All products are inspected and tested before despatch and are at the risk of the purchaser after the shipment from the
Thermofilm factory, if not delivered by Thermofilm to destination.
No products or components will be supplied in advance of an examination of the faulty product or components by
Thermofilm or an authorized representative of Thermofilm.
Thermofilm does not participate in any site related costs or labour expenses incidental to replacement of parts, repairing,
removing, installing, servicing, transportation or handling of parts to complete products, and assumes no liability on parts
repaired or replaced without written authorisation. Thermofilm shall not be liable for any default or delay in performance
of its warranty obligations caused by any circumstances beyond its control, including, but not limited to, judicial or
government restrictions, strikes, fires, floods, abnormal weather conditions, delayed supply of components.
Should products be determined as damaged on arrival, immediately notify the transport company of the condition and have
them noted on the freight documents. If damage is discovered after unpacking, demand immediate inspection by the
transportation company and insist that a record of the damage is made on the freight documentation.
The customer warrants using the product in accordance with:
Any instructions provided to it by Thermofilm from time to time.
All government and local regulations, including but not limited to all relevant electrical, environmental laws and
regulations governing the installation, storage, use, handling and maintenance of the goods.
All necessary and appropriate precautions and safety measures relating to the installation, storage, use, handling and
maintenance of goods.
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a
replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage.
You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure
does not amount to a major failure.
All warranty requests for repairs or replacements must be accompanied by a complete “Warranty Claim Form” available
from Thermofilm, together with proof of purchase (and where possible, photos of the installation) and the heater returned
to the place of purchase.
In the event of a warranty claim, the goods need to be returned to the distributor/retailer for repair/replacement. Contact
Thermofilm Australia Pty Ltd
17 Johnston Court, Dandenong South, Victoria 3175, Australia
Telephone: (03) 9562 3455, Fax: (03) 9548 3979
Email: [email protected]
www.thermofilm.com.au
Table des matières
Autres manuels HEATSTRIP Panneau de contrôle
