Heat Controller B-SMA/SMH 09 Manuel utilisateur
Heat Controller, Inc. • 1900 Wellworth Ave. • Jackson, MI 49203 • (517)787-2100 • www.heatcontroller.com
REMOTE CONTROLLER
OWNER’S MANUAL
B-SMA/SMH 09/12/18SC
Single Zone Mini-Splits
B-VMH 09/12/18/24/30/36SC-1
Single Zone Inverter Mini-Splits
B-VMH09/12/18FC-1
Multi-Flex Inverter Mini-Splits
Owner’s Manual Remote ContRolleR Heat Controller, Inc.
1
Table of Contents
Using the remote controller ......................................................................................... 2
Remote controller specications.................................................................................. 3
Function buttons.......................................................................................................... 4
Indicators on LCD display............................................................................................ 6
How to use the buttons................................................................................................ 7
Auto operation ............................................................................................................. 7
Cooling/Heating/Fan operation.................................................................................... 7
Dehumidifying operation.............................................................................................. 8
Swing operation........................................................................................................... 8
Timer operation ........................................................................................................... 9
Ecomony operation.................................................................................................... 12
Heat Controller, Inc. Remote ContRolleR Owner’s Manual
2
Using the Remote Controller
receiver
Use the remote controller within a distance of 26' 3"
(8 meters) from the appliance, pointing it towards the
receiver. Reception is conrmed by a beep.
Remove the battery cover by pressing and sliding it off.
housing
Owner’s Manual Remote ContRolleR Heat Controller, Inc.
3
an extended period of time.
Model*
R51l5BG(C)E, R51l6/BG(C)E,
R51l7/BG(C)E, R51l8/BG(C)E, R51l9/BG(C)E;
R51l10/BG(C)E, R51l11/BG(C)E, R51l12/BG(C)E;
Rated Voltage 3.0V (Dry batteries R03/LR03x2 or (2) AAA)
Lowest Voltage of CPU Emitting Signal 2.0V
Signal Receiving Range 26'3" (8m)
Environment -41°F~140°F (-5°C~60°C)
*NOTE:
Temperature setting display:
Fahrenheit scale (°F): R51l9/BG(C)E; R51l10/BG(C)E, R51l11/BG(C)E, R51l12/BG(C)E
Celsius scale (°C): R51l5BG(C)E, R51l6/BG(C)E, R51l7/BG(C)E, R51l8/BG(C)E
Remote Controller Specications
Performance Feature
Indoor setting temperature range: 62°F~88°F (17°C~30°C)
Full function of LCD Display (Liquid Crystal Display)
Heat Controller, Inc. Remote ContRolleR Owner’s Manual
4
ION and FOLLOW buttons
are optional functions.
Function Buttons
AUTO COOL DRY HEAT* FAN
*NOTE: Heat pump models only
Owner’s Manual Remote ContRolleR Heat Controller, Inc.
5
Function Buttons (continued)
ION and FOLLOW buttons
are optional functions. Press this recessed button to lock all current set-
tings. Use the LOCK mode when you want to
prevent settings from being changed accidentally.
Press the LOCK button again to cancel the LOCK
function. A key symbol will appear on the remote
controller display when the lock function is activated.
TIMER OFF Button
to maintain the most comfortable temperature
ECONOMY Button (Sleep Mode)
Heat Controller, Inc. Remote ContRolleR Owner’s Manual
6
Indicators on LCD Display
The temperature setting (from 62°F (17°C)
to 88°F (30°C)) or timer setting (0~24h)
will be displayed. If FAN mode is selected,
there will be no display.
A key symbol is displayed when pushing
the LOCK button. Push the LOCK button
to clear display.
Owner’s Manual REMOTE CONTROLLER Heat Controller, Inc.
7
How to use the buttons
Ensure power is available to the unit. The OPERATION
indicator on the display panel of the indoor unit illumi-
nates.
1. Press the MODE button to select Auto.
2. Press the TEMP button to set the desired tempera-
ture. The temperature can be set within a range of
62°F (17°C)~88°F (30°C) in 2°F (1°C) increments.
3. Press the ON/OFF button to start the air conditioner.
NOTE
1. Inthe Auto mode, the air conditioner can logically choose the
mode of Cooling, Fan, Heating and Dehumidifying by sens-
ing the difference between the actual ambient room temper-
ature and the set temperature on the remote controller.
2. In the Auto mode, you can not switch the fan speed. It is
automatically controlled in this mode.
3. If the Auto mode is not comfortable for you, the desired
mode can be selected manually.
Auto operation
Cooling/Heating/Fan Operation
Ensure power is available to the unit.
1. Press the MODE button to select COOL, HEAT (cool-
ing & heating models only), or FAN mode.
2. Press the TEMP button to set the desired tempera-
ture. The temperature can be set with a rnage of 62°F
(17°C)~88°F (30°C) in 2°F (1°C) increments.
3. Press the FAN SPEED button to select the fan speed
in four steps–Auto, Low, Med or High.
4. Press the ON/OFF button to start the air conditioner.
NOTE
In the FAN mode, the setting temperature is not displayed
in the remote controller. In fan only mode, the fan creates a
breeze without cooling or heating the room. To cool or heat
the room, cooling or heating modes need to be selected
rather than fan only.
3
2
1
3
2
1
4
Heat Controller, Inc. REMOTE CONTROLLER Owner’s Manual
8
3
2
1
1
Ensure power is available to the unit. The OPERATION
indicator on the display panel of the indoor unit illumi-
nates.
1. Press the MODE button to select DRY mode.
2. Press the TEMP button to set the desired tempera-
ture. The temperature can be set within a range of
62°F (17°C)~88°F (30°C) in 2°F (1°C) increments.
3. Press the ON/OFF button to start the air conditioner.
NOTE
In the Dehumidifying mode, you can not switch the fan
speed as it is being automatically controlled.
Dehumidifying operation
Swing operation
direction.
direction setting feature of the louver is activated. The
angle of the louver changes by 6° each time the but-
ton is pressed. Keep pressing the button to move the
louver to the desired position.
2. By pressing the SWING button without releasing it for
2 seconds, the auto swing feature of the louver acti-
vates. The horizontal louver swings up/down automati-
cally. Press it again to stop.
NOTE
When the louver moves to a position which would affect the
cooling and heating effect of the air conditioner, it will auto-
matically change the swing/louver direction.
Owner’s Manual Remote ContRolleR Heat Controller, Inc.
9
Pressing the TIMER ON button can set the auto-on
time of the unit. And pressing the TIMER OFF button
can set the auto-off time of the unit.
symbol
symbol
.
SEE NOTE.
SEE NOTE ON NEXT PAGE.
symbol
Ce manuel convient aux modèles suivants
23
Table des matières
Autres manuels Heat Controller Télécommande
Heat Controller
Heat Controller SMA24SC Manuel utilisateur
Heat Controller
Heat Controller RG32A/E Guide de démarrage rapide
Heat Controller
Heat Controller Room Air Remote Controller Manuel utilisateur
Heat Controller
Heat Controller Comfort-Aire PSH-141A Manuel utilisateur
Heat Controller
Heat Controller Room Air Remote Controller Guide de configuration
Heat Controller
Heat Controller SMA Series Manuel utilisateur
Heat Controller
Heat Controller B-VFH 9/12/18/24/DA Manuel du propriétaire
Manuels Télécommande populaires d'autres marques
Panasonic
Panasonic EUR7622KB0 Manuel utilisateur
Bang & Olufsen
Bang & Olufsen Beo4 Manuel utilisateur
Sunwave Tech.
Sunwave Tech. RemoteComm SRC-7000 Manuel utilisateur
Multiplex
Multiplex PROFI TX 9 Manuel utilisateur
One Remote
One Remote RMB4 Manuel utilisateur
FUTABA
FUTABA 9ZAP - PART2 Manuel utilisateur
