HDL-BUS PRO Installation Manual for SB-CMS-PIR
www.smarttouch.co.nz
001
Installation Requirements
Installation Dimensions
Description
Working Temperature: -5°~45°
Operating Relative Humidity: 20%~90%
Storage Temperature: -40°~+55°
Storage Relative Humidity: 10%~93%
Protection Grade
：
2.0
Environmental Conditions
•
Can control based on detecting motion or
lack of motion. Maximum 99 targets
•
Master-slave mode selectable
•
Security supported
Features
•
Input Voltage
:
DC 12-30 V
•
Input Current
:
15mA/DC 24V
•
Installation
:
Ceiling or Wall mount
•
Sensitivity setting range
:
20
～
80
•
The maximum detection angle: 110°
•
Maximum detection range (Radius: 4.8m,
height 3.4m
•
Exterior Size
：
80mm×80mm×32mm
Performance Parameters
The SB-CMS-PIR is a Ceiling Mount Infrared
Motion Sensor.
Incorporates: PIR moon sensing funcon
•
Interior installation and ambient temperature is below 35 degrees Celsius, high temperature
environments will lower sensitivity
•
Do not install near air-conditioning vents, temperature changes may cause malfunction
•
Do not install near strong electromagnetic interference, strong electromagnetic interference may
cause malfunction
•
Accessories: Each sensor is supplied with an adjustable plastic bracket, to shield part of the sensing
area if necessary
•
Bus connection: CAT-5 UTP
80
Elevation Side View
Coping
Fresnel Lens
Wiring Track
32
Back View
Slot
Bottom Shell
Wedge
Airway
Screw Hole
44.5
Wiring hole, Use
a screwdriver or
other tools to
carefully break
out opening.
