HDanywhere MHUB Manuel utilisateur

PRODUCT CODE: MHUBMAX44

MHUB MAX

HD CONNECTIVITY LTD, trading as HDANYWHERE registered in England and Wales. Company No: 06046737 Registered ofce: Unit 23 Link Business Centre, Link Way, Malvern, Worcestershire, WR14 1UQ. Contact: [email protected] Tel: 00441684575324

VCP-28112017

MHUB MAX

CONTENTS SYSTEM: MHUB MAX

IN THE BOX

1x MHUB MAX (4x4) matrix hub

1x MHUB (4x4) infra-red (IR) remote control

1x IEC power lead

1x IR RX

2x 19” rack mounting ears

MHUB MAX is an Ultra HD Premium™ 4x4 HDMI 2.0 matrix with maximum bandwidth

capabilities - the ultimate matrix option for cinema purists, it supports the full HDMI 2.0 (a/b)

18Gbps max data rate, capable of carrying the most premium UHD/4K 60 4:4:4 content, with all

HDR formats (10 & 12-bit), Dolby Vision®, HDR10+ and HLG. Integration needs are well catered

for, with each of the four display outputs featuring both multichannel digital audio extraction

and stereo downmixing, making for easy integration with multizone ampliers or audio matrices.

Users can easily switch between sources at every display location via the included remote, the

free uControl App or with the hands-free convenience of Alexa voice control. MHUB MAX also

features remote management, designed to reduce the necessity for callouts and site visits.

MHUB MAX features HDA’s ‘carbonite’ premium industrial design language with disappearing

backlit touch controls so that the user interface makes way for design minimalism when not

required. With no ugly buttons, labels or switches MHUB MAX is one of the most attractive

devices in the rack.

Please fully read and adhere to the setup information and operational instructions

contained within this installation manual.

Contents and introduction 2

System features and Initial setup 3

Central hub diagram 4

Standard wiring diagram 5

Operating your system 6-7

Specications and important information 8

Guarantee, information and contacting customer support 9

Please give us your feedback 10

2 3

MHUB MAX

SYSTEM FEATURES

HDMI® 2.0 (a/b) HDCP 2.2 compliant

18Gbps data rate throughout

Backlit fade in/out touch panel controls

Web GUI for easy cong and setup (MHUB-OS)

Remote system monitoring and management (HDA Cloud)

Advanced EDID management

Supports all resolutions up to and inc. Ultra HD 4K 60 4:4:4

Supports all current High Dynamic Range (HDR) formats

Supports all current audio formats up to Dolby Atmos® and DTS:X®

Multichannel audio extraction via digi coax

Multichannel audio downmix via stereo jack

3/4-year guarantee (Cloud registration required)

MHUB MAX

1 “HUB CONTROL IP” Port: Connect the MHUB system to your router via this port to enable

controllability via TCP/IP commands, web GUI access and system control via the uControl App.

2 “HUB CONTROL RS232” Port: Use to integrate your MHUB with a control system via RS232

3 “SOURCE INPUTS” [1-4]: Use to connect HDMI source devices to the MHUB

4 “DISPLAY OUTPUTS” [A-D]: Use to connect HDMI displays

5 “DIGITAL” audio port: Use this port to extract multi-channel audio via a coaxial cable

6 “STEREO” audio port: Use this port to extract down-mixed stereo audio via a 3.5mm jack

cable

7 “HUB IR (IN)”: Connect an IR RX to this port to control your MHUB with the included IR remote

control (or other learning remote) whilst in line-of-sight of the IR RX.

Or control the MHUB with a third party controller via direct IR, using the optional add-on

accessory called the ‘MHUB IR integration cable’. (1.55.911.001.1)

8 AC input: Connect the supplied IEC power cable to this port to provide power to your matrix

MHUB MAX (4x4) TOUCH PANEL (FRONT)MHUB MAX (4x4) CHASSIS (REAR)

1 MHUB ON/OFF: Press and hold for 2 seconds to turn MHUB on or off

2 Source Selector (1-4): Select which source you want to switch to

3 LCD Panel: Displays MHUB system information and switching status

4 Display Selector (A-D): Select which display you want to output to

5 Menu and Navigation Control: Brings up EDID and IP menu settings

6 Press and hold menu for 5 seconds to show IP address on the centre LCD display.

4 5

MHUB MAX

RS232

HUB CONTROL 1 2 3 4 AB C D

SOURCE INPUT

DISPLAY

hub ir (IN)

100-240V AC 50/60HZ

DIGITAL STEREO DIGITAL STEREO DIGITAL STEREO DIGITAL STEREO

Zone AZone B

MHUB-OS

HDANYWHERE

WIRING DIAGRAM

HDMI Cable

Ethernet Cable

Digi-Coax Cable

IR Receiver

IR Signal

uControl

MHUB MAX

BEFORE STARTING: Read and agree to the End User Licence Agreement (EULA) and Privacy

Statement

First Boot Step 1 – Check for MOS updates

This is where your MHUB requests available updates from HDA cloud so your unit will update to

the latest version. This is done before proceeding.

First Boot Step 2 – Name your MHUB

Here you can give your MHUB a personal name, this can also be used to differentiate multiple

installations by HDA Pro’s

First Boot Step 3 – Name your sources/inputs

On this page you can label your input devices, such as Sky, Apple or Tivo. These labels are used

in the uControl app and with voice control.

SETUP CONTINUED...

1. Power off all displays and all HDMI source devices.

2. Connect the unpowered HDMI sources to the HDMI inputs on the matrix hub using suitably

robust HDMI cabling options (i.e. guaranteed to support 18Gbps bandwidth).

3. Connect each display such as a HDTV or Projector to the HDMI output ports on the matrix

hub using suitably robust HDMI cabling options (i.e. guaranteed to support 18Gbps bandwidth).

4. Plug in the power for the matrix hub.

5. Power on each HDMI source device followed by each display.

6. At this point the four displays should show the video and audio of the HDMI source devices

connected to the matrix.

MHUB-OS FIRST BOOT PROCESS

Make sure MHUB is connected up correctly before starting the rst boot process on MHUB-OS

HDANYWHERE(HDA) recommends that every MHUB install goes through its rst boot process

to ensure that the MHUB is setup correctly. Please follow the quick start guide (inside MHUB

packaging) to make sure your MHUB is connected correctly to your source devices, displays and

has an active network connection before proceeding.

I don’t use MHUB-OS or go through the rst boot process, will it still work like a normal matrix?

Yes. You do not need to access MHUB-OS if you don’t want to. MHUB will work distributing video

as normal and will be controllable using the included remote controls. Please note that you will not

be able to access advanced features such as voice control, the uControl app or build Sequences.

Accessing MHUB-OS (MOS)

There are two ways to access MOS:

1. Download our app, uControl, from the iOS or Google Play Store and let it nd MHUB (and run

you through the rst boot) for you.

2. Go to your MHUB and press and hold the “MENU” button for 5 seconds to reveal its IP address.

(For example 192.168.1.200) Make a note of it then put that address into any web browser on

the same network. You will be forwarded to your MHUB-OS and prompted to complete the rst

boot process.

6 7

MHUB MAX

First Boot Step 4 – Name your Displays/Rooms/outputs

This page is similar to the previous step. You can choose to label them as display manufacturers

or room names. Again please follow best practice guidelines available here – [Best Practices]

First Boot Step 5 – Turn update notications On/Off

MOS updates are released periodically, here you can choose to be notied when an update is

available.

First Boot Step 6 – Create or link your MHUB to a HDA cloud account, read and agree to our

Terms and Conditions

MHUB 4K and MHUB 4K PRO units can be linked to a cloud based account. When registering

as a homeowner this enables a couple of things. Firstly when you register, your warranty period

is extended by 1 year, in addition to that cloud access is required when using the uControl IR

engine feature allowing you to control source and display devices. Cloud access is also required

for voice integration. For a HDA PRO the cloud account allows you to manage your MHUB

installations remotely, getting system information as well as a host of other features.

First Boot Step 7 – Secure MHUB with a PIN number

If you wish you can lock local access to MOS stopping any unwanted conguration changes

from being made.

First Boot Step 8 – Complete First Boot Setup

Once you have completed the rst boot process you can either ‘COMPLETE SETUP’ and go to

the MOS DASHBOARD page, or go to the uControl page to start adding device/source control.

MHUB MAX

OPERATION

Via the touch panel

Using the supplied IR remote control

You can switch between connected HDMI sources (1, 2, 3 and 4) at displays (A, B, C and D)

manually by using the touch controls on the front of the matrix hub. First press one of the four

“Display output” buttons (A, B, C or D) for the required output to be changed. Next select which

input is to be routed to that output by pressing one of the “Source selector” buttons (1, 2, 3 and

4). For example, press ‘Display A’ followed by ‘Source 3’ to view input device 3 on the rst output.

1. Connect the included IR RX cable to the 3.5mm jack port labelled ‘HUB IR’

2. Test IR functionality using the included IR remote control

The remote control packaged with the system can control the matrix once you have set it up

as follows.

HDANYWHERE

Integrating and operating MHUB MAX with a third party

control system

The HDANYWHERE uControl App

It is highly recommended that you learn more about uControl at HDANYWHERE.com or visit the

dedicated uControl support pages at http://support.hdanywhere.com/ucontrol/

The MHUB can be integrated with a third party control system via IP or RS232. Drivers for the

most popular brands can be found on the MHUB MAX product page on our online support site.

http://support.hdanywhere.com/products/multiroom-hd/mhubmax/

Download the free HDANYWHERE uControl App to your phone or tablet. With uControl and the

MHUB MAX you can control which source is being routed to what display.

BACK

PAGE PAGE

BACK

HELP

uControl

It is possible to control MHUB with a third party controller via

direct IR, using the optional add-on accessory called the ‘IR

integration cable’ (1.55.911.001.1)

8 9

MHUB MAX

REMOTE MANAGEMENT

MHUB MAX features remote management software, designed to reduce the necessity for

callouts and site visits. Whether at the ofce, roadside service station or working from home,

the HDA PRO Cloud dashboard offers a secure portal to remotely monitor and manage network-

connected MHUB installations across multiple client sites. Power-cycling, software rebooting,

diagnostics, EDID changes and uControl conguration changes can all be performed without ever

having to visit the unit in person.

REMOTELY

MONITORABLE

Projects list Advanced EDID management

MHUB system dashboard

cloud.hdanywhere.com

MHUB MAX

SPECIFICATIONS

These specications may change or be improved without notice. HDANYWHERE may not be held

responsible for discrepancies.

Terms and Policies, including General Data Protection

Regulation (GDPR) and other Data Protection Laws.

During the setup process of this device, the HDA Pro (Installer) and End-User are required

to agree to a set of terms, conditions, rules, policies and license agreements, including

the HDANYWHERE Privacy Policy. These terms, notices and policies are, collectively, the

“Agreements”. By installing or using this MHUB, you agree to be bound by the Agreements.

EU Conformity

Hereby, HDANYWHERE declares that this HDMI connectivity device is in compliance with the

essential requirements and other relevant provisions of the following Directives: 2006/95/EC

(LVD Directive); 2004/108/EC (EMC Directive); 1999/5/EC (R&TTE Directive). The full text of

the EU declaration of conformity is available in the compliance section at HDANYWHERE.com/

legals

Recycling your device properly

In some areas, the disposal of certain electronic devices is regulated. Make sure you dispose of

or recycle your device in accordance with your local laws and regulations.

IMPORTANT INFORMATION

Form factor 19”/1U aluminum rack-mountable unit

Inputs / outputs 4 HDMI / 4 HDMI

Transmission tech. Native HDMI

Video bandwidth 594MHz - 18Gbps

ESD protection ± 8kV (air-gap discharge) ± 4kV (contact

discharge)

Hub control Web GUI, IR, TCP/IP, RS232, App, Alexa

App control Source selection / hub only

Device weight 1820g

Package weight 3500g

Dimensions (W/D/H) 440 / 284 / 43mm (without feet)

Power Internal 110-240v IEC connection

Guarantee 3/4-year guarantee (Cloud registration

required)

Operating temperature 0 ºC~40 ºC / 32 ºF~104 ºF

Storage temperature 0 ºC~40 ºC / 32 ºF~104 ºF

Relative humidity 20~90 % RH (non-condensing)

Power consumption 30W (max) / 0.5W (standby)

Autres manuels pour MHUB

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels HDanywhere Commutateur matriciel

HDanywhere

HDanywhere MHUB Manuel utilisateur

HDanywhere

HDanywhere HKM42-UK Manuel utilisateur

HDanywhere

HDanywhere MHUB4KPRO44 Manuel utilisateur

HDanywhere

HDanywhere HKM42BTP Manuel utilisateur

HDanywhere

HDanywhere MHUB PRO 2.0 (4x4) 40 Manuel utilisateur

HDanywhere

HDanywhere MHUBU43140 Manuel utilisateur

HDanywhere

HDanywhere MHUB862U Manuel utilisateur

HDanywhere

HDanywhere MHUB2K88 Manuel utilisateur

Manuels Commutateur matriciel populaires d'autres marques

Broadcast Tools

Broadcast Tools SS 8.2 Manuel utilisateur

Altimium

Altimium MATF32 Manuel utilisateur

ALFAtron

ALFAtron ALF-MUK44N Manuel utilisateur

Monoprice

Monoprice Blackbird 15377 Manuel utilisateur

Kramer

Kramer XL 3216VS Manuel utilisateur

PTN

PTN FMX12 Manuel utilisateur

CYP

CYP nT15GX01 Manuel utilisateur

Kramer

Kramer VP-2x2 Manuel utilisateur

Kramer

Kramer Sierra Video 6432V5xl Manuel utilisateur

TESmart

TESmart HMA0402A40 Manuel utilisateur

Octava

Octava HD4XSTPMX Manuel utilisateur

Intelix

Intelix FLX-88 Mode d'emploi

Kramer

Kramer LASSEN XL 3232S Manuel utilisateur

Roland

Roland XS-1HD Manuel utilisateur

Kramer

Kramer VS-66HDCPxl Manuel utilisateur

Atlona

Atlona AT-HDMI-22M Manuel utilisateur

Link

Link HD8X8 Manuel utilisateur

AMX

AMX AVS-OP-2020-117 Instructions et recettes