HBA 27-WF697 Manuel utilisateur
Operating Instructions
Wi-Fi camera with Built-in Battery and Magnet
Please read this manual thoroughly before operating the unit
V1.0
HBA Fordonsteknik AB
Contents
1. Instructions for Wi-Fi Camera ............................................................. 1
1.1 Product Features ........................................................................... 1
1.2 Product Introduction ...................................................................... 2
2. Instructions for APP of Wi-Fi Camera (for Android System)............... 3
2.1 Software Installation ...................................................................... 3
2.2 Wi-Fi Hotspot Connection ............................................................. 4
2.3 Software Operation........................................................................ 5
2.4 Upgrade of Camera Software........................................................ 8
3. Instructions for APP of Wi-Fi Camera ( for iOS System).................. 13
3.1 Software Installation .................................................................... 13
3.2 Wi-Fi Hotspot Connection ........................................................... 14
3.3 Software Operation...................................................................... 16
3.4 Upgrade of Camera Software...................................................... 19
1
1. Instructions for Wi-Fi Camera
1.1 Product Features
1. Long press the power button to turn on or off;
2. Twice double-click the power button to restore the defaults;
3. Battery capacity indicator;
4. Overcharging protection;
5. Over discharging protection;
6. Short-circuit protection;
7. Overheat and low temperature protection;
8. Load detection when over-voltage is detected;
9. Strong magnetic base;
2
1.2 Product Introduction
Adapter C
onnector
ON / OFF
Magnet (bottom)
0%-25%
25%-50%
50%-75%
75%-100%
3
Attention !
1. To protect the battery from damage, please charge it to 75% of
capacity before storaging it for a long period of time, and charge it
again to 75% within the next 150 days.
2. After stored for a long time, the initial charging current might be
relatively low, but it will recover after a while.
2. Instructions for APP of Wi-Fi Camera
(for Android System)
2.1 Software Installation
http://183.233.190.23:6061/tmp/android/StreamVis_1.2.4.181
122_alpha.apk
Firstly, to open the link above with the browser in your mobile phone or
computer browser or use your mobile phone to scan the qr code, and
then you can download the installable package of the APP to the
browser, Lastly locate the downloaded installation package and
complete the installation of the APP (In order to avoid the flashbacks
when you open the APP, please make sure the storage and location
permissions of StreamVis are enabled).
4
2.2 Wi-Fi Hotspot Connection
Methods / steps:
Long press the power button of the Wi-Fi camera to turn it on.
Open “Settings” on your phone and enter the "WLAN" interface. If
WLAN is off, please turn it on. Then Connect to the camera
corresponding hotspot (such as the initial hotspot name: “WFC-xxx”).
If you use “StreamVis” without successfully connecting to a hotspot
named “WFC-xxx”, the APP main interface will not display images and
will prompt you to check Wi-Fi connection.
The Power Button
5
2.3 Software Operation
Methods / steps:
Press the icon on the phone’s desktop to enter StreamVis,
and then the main interface will display(see picture below).
6
You can tap on the screen of the mobile phone, then you can see that
there are four main configuration items displayed on the right function
area of the main interface.
Press the "Capture" button to take screenshot and save it in
the album.
7
Press the "Video" button to record the current video and save
it in the album.
Press the "Album" button to review the screenshots and videos
that have been saved in album before.
Press the "Settings" button to open the Main Settings interface.
There are four configurable items on this interface, including Quality,
Mirror, Flip and Audio.
A detailed description of the configuration items is shown in the
following table.
8
Configuration items Instructions
Quality
(Resolution)
HD (1280*720) SD (704*480)
CIF (352*240)
Mirror
ON (To open the mirror image)
OFF (To close the mirror image)
Flip
ON (To flip the screen vertically)
OFF (To stop flip the screen
vertically)
Audio
ON (To turn on the audio)
OFF (To turn off the audio)
2.4 Upgrade of Camera Software
Firstly, open StreamVis and then press the button to enter the
Main Settings interface. Press the "Upgrade" button at the bottom of
the configuration list (see red mark below) to start to upgrade the
program .
Table des matières
