Haws 3060 Mode d’emploi

03/17 Model 3060 Page 1 of 4

No. 2077030 (17)

1455 Kleppe Lane Sparks, NV 89431-6467 (775) 359-4712 Fax (775) 359-7424

E-mail: haws@hawsco.com  website: www.hawsco.com

Model 3060

Drinking Fountain

INSTALLATION, OPERATION

MAINTENANCE INSTRUCTIONS

LIMITED WARRANTY

HAWS warrants that this specific product is guaranteed against defective material or

poor workmanship for a period of one year from date of shipment. HAWS liability

under this warranty shall be discharged by furnishing without charge F.O.B. HAWS

Factory any goods, or part there

of, which shall appear to the Company upon

inspection to be of defective material or not of first class workmanship, provided that

claim is made in writing to Haws within a reasonable period after receipt of the

product. Where claims for defects are made,

the defective part or parts shall be

delivered to the Company, prepaid, for inspection. HAWS will not be liable for the

cost of repairs, alterations or replacements, or for any expense connected therewith

made by the owner or his agents, except upon written authority from HAWS, Sparks,

Nevada. HAWS will not be liable for any damages caused by defective materials or

poor workmanship, except for replacements, as provided above. Buyer agrees that

HAWS shall not be liable for general, special, or consequential damages claimed to

arise under the contract of sale. The drinking fountain manufactured by HAWS is

warranted to function if installation and maintenance instructions provided are

adhered to. The units also must be used for the purpose for which they were

intended.

NO OTHER WARRANTIES EXPRESSED OR IMPLIED ARE AUTHORIZED,

PROVIDED OR GIVEN BY HAWS.

NOTE TO INSTALLER: Please leave this information with the Maintenance Department.

SHOULD YOU EXPERIENCE DIFFICULTY WITH THE INSTALLATION OF THIS

MODEL PLEASE CALL:

TECHNICAL SUPPORT: 1-800-766-5612

FOR CUSTOMER SERVICE: 1-888-640-4297

03/17 Model 3060 Page 2 of 4

RECOMMENDED TOOLS: Hack saw, pipe joint sealant, screwdriver, level, 12"

adjustable wrench, 10" pipe wrench, 5/64“ hex key wrench, 9/16”, 1/2", 7/16” socket

wrench or open end wrench.

LOCATION OF UNIT: When installing Model 3060 Drinking Fountain, local, state or

federal codes should be adhered to. If height other than shown is required, then

dimensions must be adjusted accordingly.

SUPPLY LINE: The minimum recommended line size is 1/2“IPS with 30-90 psi (2-6

ATM) flowing pressure. Where sediment or mineral content is a problem, an inlet filter

is recommended.

PLUMBING CONNECTIONS: Inlet is female 1/4" IPS. Waste outlet is 1-1/4” O.D.

tailpiece.

MAINTENANCE: Periodically clean the strainer. Refer to 5874 Series Valve Manual

for more information.

TROUBLESHOOTING

PROBLEM

REPAIR CHECKLIST

Insufficient bubbler flow.

1a.

Check that inlet screwdriver stop

valve is in wide-open position.

Verify minimum 30 psi flowing

supply pressure.

Clean strainer. See 5874 Series

Valve Manual.

Adjust valve to increase flow. Use

front adjust screw or see 5874

Series Valve Manual.

General Notes:

Before tightening nut and ferrule assembly, push tubing into fitting until it bottoms out to

ensure correct engagement with O-Ring.

For more information about Haws products, see our website: www.hawsco.com

HAWS® and other trademarks usedin these materials are the exclusive property of Haws Corporation.

PARTS BREAKDOWN

1/2" NPT

SCREWDRIVER STOP

(NOT SUPPLIED)

STRAINER WASTE ASSY, PCP1

2BUBBLER HEAD ASSY, PCP

PUSH BUTTON ASSY

4BUTTON, PUSH, NON-FLANGED, PCP

5701SL

PBA7

5874PB

6461

ITEM DESCRIPTION

PLATE, ACCESS, 3060, W/ HOLE 0004499489

* DENOTES OPTIONAL PART.

VALVE REPAIR KIT VRK5874

PART NO.

VALVE, BIB FAUCET, PCP 6250LF

2 (OPTIONAL)

APPROVED

DRAWN

PART NUMBER

SCALE: SHEET OF

REVISION

DRAWING TYPE: SIZE: A

BYECN NO.

PAGE

DATE

ECN:

REVISED PER

CHKD

HAWS and other trademarks used in these materials are the exclusive property of Haws Corporation.

MODEL(S)

1455 KLEPPE LANE

SPARKS, NEVADA 89431

(775) 359-4712 FAX (775) 359-7424

E-MAIL: [email protected]

WEBSITE: WWW.HAWSCO.COM

THIS DOCUMENT IS TRUE AND CORRECT AT TIME OF PUBLICATION. CONTINUED PRODUCT IMPROVEMENTS

MAKE SPECIFICATIONS AND MEASUREMENTS SUBJECT TO CHANGE WITHOUT NOTICE.

WHEN ORDERING PARTS PLEASE SPECIFY MODEL NUMBER.

D> OLLOM

11/25/95

0002077030

3060

1:6

07/06/17

VWC

3 OF 4

PARTS BREAKDOWN

5187

2017

VWC

2 (OPTIONAL)

5REF

ROTATED 90° INTO VIEW

DETAIL A

REMOVE INSERT

WITH 5/16 HEX SOCKET

(NOT SUPPLIED)

NOTES:

1 5874PB (ITEM 3) INCLUDES VRK5874 CARTRIDGE ASSEMBLY

(ITEM 4) AND PBA7 RECESSED PUSH BUTTON (ITEM 5).

2 USE MODEL 6250LF WITH ACCESS PLATE, PN 0004499469.

3 ENSURE TUBE IS DISCONNECTED FROM PUSH BUTTON VALVE

BODY PRIOR TO REMOVAL. APPLY ONE DROP OF LOCTITE

222MS TO NOZZLE THREADS PRIOR TO FASTENING BACK ONTO

BUBBLER HEAD. RE-ATTACH TUBE TO VALVE.

GROUND LEVEL

1/2" NPT SCREWDRIVER STOP,

1-1/4" O.D. TAILPIECE

1-1/4" IPS WASTE (NOT SUPPLIED)

(NOT SUPPLIED)

COUPLINGS

(EPOXY NOT SUPPLIED)

SECURED WITH EPOXY

MOUNTING HOLE PLUGS

STOP (NOT SUPPLIED).

1/2" NPT SCREWDRIVER

1/2" IPS SUPPLY (NOT SUPPLIED)

ACCESS PLATE

0004499489

SEE BIB DETAIL

1/2" NPT INLET

BIB DETAIL

(SUPPLIED)

3/8" O.D. TUBING (NOT SUPPLIED)

COMPRESSION FITTING, AND

VALVE INLET

TO BUBBLER

1054mm

MTG HARDWARE

3X 1/2"-13 UNC

(SUPPLIED)

41-1/2"

ON 9" [229mm] B.C.

3X 1/2" MTG BOLTS

102mm

MOUNTING DETAIL

305mm

12"

BUBBLER

LOCATION

WASTE

SUPPLY 2-1/2"

64mm

1-1/4 IPS WASTE

(TO SPOUT

NOTES:

OUTLET)

1 REFER TO 5874 SERIES OPERATION AND MAINTENANCE MANUAL FOR PUSH

BUTTON AND VALVE INSTALLATION/MAINTENANCE INSTRUCTIONS.

(OPTIONAL)

COMPRESSION FITTINGS

1/2" TUBING AND

(NOT SUPPLIED)

1/2" TEE (SUPPLIED)

CONCRETE PEDESTAL

(OPTIONAL)

MODEL 6250LF

BIB FAUCET

APPROVED:

DRAWN:

PART NUMBER

SCALE: SHEET OF

REVISION

DRAWING TYPE: SIZE: A

BY:ECN NO.

PAGE

DATE:

ECN:

REVISED PER

CHK'D.:

MODEL(S)

1455 KLEPPE LANE

SPARKS, NEVADA 89431

(775) 359-4712 FAX (775) 359-7424

E-MAIL: [email protected]

WEBSITE: WWW.HAWSCO.COM

THIS DOCUMENT IS TRUE AND CORRECT AT TIME OF PUBLICATION. CONTINUED PRODUCT IMPROVEMENTS

MAKE SPECIFICATIONS AND MEASUREMENTS SUBJECT TO CHANGE WITHOUT NOTICE.

08/90

0002077030.D.

3060

12:1

07/06/17

VWC

4 OF 4

INSTALLATION

5187

2017

Autres manuels Haws Produits de plomberie

Manuels Produits de plomberie populaires d'autres marques

Weka

Weka 506.2020.00E Mode d'emploi

Kohler

Kohler K-6228 Instructions de montage

UBERHAUS DESIGN

UBERHAUS DESIGN 75175017 Manuel utilisateur

American Standard

American Standard DetectLink 6072121 Manuel utilisateur

Uponor

Uponor Contec TS Manuel utilisateur

Pfister

Pfister Selia 49-SL Manuel utilisateur

Fortis

Fortis VITRINA 6068700 Manuel utilisateur

Fortis

Fortis MILANO 78211JS Manuel utilisateur

Kohler

Kohler K-12183 Instructions de montage

Maxxus

Maxxus MX-M206-01 Manuel utilisateur

Moen

Moen 5922 Series Manuel utilisateur

Viega

Viega Prevista Pure 8512 Manuel utilisateur

Kohler

Kohler Centerset K-15240 Instructions de montage

Viega

Viega Prevista Dry 8522.33 Manuel utilisateur

Sanela

Sanela Lema SLP 59RB Manuel utilisateur

Elkay

Elkay EDF15AC Manuel d'installation

Hans Grohe

Hans Grohe AXOR Citterio E 36702000 Manuel

baliv

baliv WT-140 Manuel utilisateur