Hawking HWABN1 Manuel utilisateur

QUICK INSTALLATION GUIDE

Part No. HWABN1 Hi-GainTM Wireless-300N Access Point/Bridge

www hawkingtech com Technical Support: 1 888 202 3344

Start Here XZX

1 Check Package Contents & Requirements

Package Contents

•1x Wireless-300N A/Bridge

•1x Power Adapter

•1x Ethernet Cable

Requirements

•Internet Access with router or modem

•PC Computer (for configuration only)

•Power Outlet

2 Overview

3 Connecting the AP/Bridge

4 Configuring the AP/Bridge

1.) Connect the A/C power adapter to an

electrical source, and then connect it to the

‘Power’ socket of the AP/Bridge.

3.) Connect your PC to any of the LAN ports

located on the back of your router/AP.

Example

PC Rear Ports

Router/AP

“SOURCE”

PC Symbol for Ethernet Port

HWABN1

AP/Bridge HWABN1

AP/Bridge

1.) Insert the Setup CD into the

CD-ROM drive of your computer.

2.) When the auto-load page

appears, click the Setup Wizard

option on the right and follow the

Setup directions...

3.) Scan for your AP/Bridge by clicking

the ‘Search’ button. Once found, click

the device to highlight it and click

‘Next”.

4.) Here, you can adjust your LAN IP

address for the AP/Bridge. You can

automatically assign an IP from your

network, or you may also choose to set

it Manually. Click ‘Next’.

5.) Select an Operation Mode. Choose

either Access Point Mode or Ethernet

Bridge Mode. Click ‘Next’. See Step 5a

to continue operating in Access Point

Mode or Step 5b to continue operating

in Bridge Mode.

2.) Connect your AP/Bridge to your broad-

band router.

Router/AP

“SOURCE”

HWABN1

AP/Bridge

Broadband Modem

•1x Setup CD -ROM

•1x QIG (Quick Install Guide)

•2x Dipole Antennas

their respective owners. Apple and Mac are registered trademarks of Apple Computer, Inc. No

Technical Su

ort: 1.888.202.3344 or techsu

ort@hawkin

tech.com www.hawkin

tech.com

6 Connecting to your AP/Bridge

6.) Choose a name for your AP/Bridge. You

will use this name to identify and connect to the

network. Optionally, you may change your

interface at the IP address you selected previ-

ously. Click ‘Next’.

7.) In Access Point Mode, it is optional to setup

an encrypted network. If you don’t, your new

wireless network will be open to any and all

users who can see your network. Hawking

suggests setting up a basic WPA security as

shown above.

5a Operating in Access Point Mode

8.) The Setup Summary displays all your

recently configured settings for the HWABN1

AP/Bridge. Please double check all settings to

make sure they are correct and remember the

IP address for logging into the web-user inter-

face. Click ‘SET’ to apply all settings.

1.) To connect to your new wireless network,

click the wireless network icon in your system

tray. It is located in the bottom right-hand

corner of your desktop.

2.) Click the ‘View Wireless

Networks’ button in the ‘Wire-

less Network Connection

Status’ window.

3.) Find your new network (default ID:

Hawking_300N_AP/Bridge) and click on

it twice or select and click ‘Connect’. You

can now enjoy your newly extended

wireless network!

NOTE: If you have WPA Security

enabled you will be prompted to

enter your password.

5b Operating in Bridge Mode (Client Mode)

1.) In Bridge Mode, you must scan for the

wireless network that you would like to “bridge”

to your wired network device. Select the net-

work and click ‘Next’.

2.) Here you are given the option to change

the password for log-in to the web-user inter-

face. If you wish to leave the log-in information

as the default settings (Username: admin,

Password:1234) click ‘NEXT’ to move on.

3.) The Setup Summary displays all your

recently configured settings for the HWABN1

AP/Bridge. Please double check all settings to

make sure they are correct and remember the

IP address for logging into the web-user inter-

face. Click ‘SET’ to apply all settings.

Autres manuels pour HWABN1

Table des matières

Autres manuels Hawking Point d'accès sans fil

Hawking

Hawking HOD45B Manuel utilisateur

Hawking

Hawking WB320 Manuel utilisateur

Hawking

Hawking HPOW10D Manuel utilisateur

Hawking

Hawking NK340W Manuel utilisateur

Hawking

Hawking Hi-Gain HW7ACX Manuel utilisateur

Hawking

Hawking HOWABN1 Manuel utilisateur

Hawking

Hawking HWBA54G Manuel utilisateur

Hawking

Hawking HWBA54G Manuel utilisateur

Hawking

Hawking HOD45B Manuel utilisateur

Hawking

Hawking HW9ACM Manuel utilisateur

Hawking

Hawking HWABN2 Manuel utilisateur

Hawking

Hawking HWABN1 Manuel utilisateur

Hawking

Hawking HOW12ACM Manuel utilisateur

Hawking

Hawking HWBA54G Manuel utilisateur

Hawking

Hawking HW17ACM Manuel utilisateur

Hawking

Hawking HOW17ACM Manuel utilisateur

Hawking

Hawking Hi-Gain HOWABN1 Manuel utilisateur

Hawking

Hawking Hi-Gain HD45B Manuel utilisateur

Hawking

Hawking HPOW5CM Manuel utilisateur

Hawking

Hawking HI-GAIN HAW2R1 Manuel utilisateur

Hawking

Hawking HOW17ACMx2 Manuel utilisateur

Hawking

Hawking HOW12ACMx2 Manuel utilisateur

Hawking

Hawking HOWABN1 Manuel utilisateur

Hawking

Hawking HWABN1 Manuel utilisateur

Manuels Point d'accès sans fil populaires d'autres marques

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Manuel utilisateur

Ubiquiti

Ubiquiti NanoStation NSM2 Manuel utilisateur

Cisco

Cisco Aironet 1550 Series Manuel utilisateur

Aruba

Aruba IAP-335 Manuel utilisateur

Advantek Networks

Advantek Networks AWN-AP-54MR Manuel utilisateur

IP-COM

IP-COM AP355 Manuel utilisateur

Buffalo

Buffalo AirStation WLA-L11G Manuel utilisateur

EnGenius

EnGenius EnStationACv2 Manuel utilisateur

D-Link

D-Link DAP-3662 Manuel utilisateur

xG Technology

xG Technology xMax CN1300 Manuel utilisateur

Widelink

Widelink ezWave WAP-1100 Series Manuel utilisateur

Edimax

Edimax CAP1200 Manuel utilisateur

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Manuel utilisateur

Aruba

Aruba AP-203R Manuel utilisateur

LuXout Shades

LuXout Shades LUXSHADE MOTION Manuel utilisateur

CreatComm

CreatComm TB5F Manuel utilisateur

SineDigital

SineDigital MW-1500AP(H) Manuel utilisateur

TP-Link

TP-Link AP9650 V1 Manuel utilisateur