Hawking HMPS2U Manuel utilisateur
STEP 1
Check Package Contents for:
1.) One HMPS2U Wireless Multifunction USB Device Server
2.) Setup CD with Wireless Multifunction USB Device Server Software
3.) One DC 12V/1.5A Power Adaptor
4.) One Quick Installation Guide (QIG)
System Requirements:
- Windows 2000 / XP / Vista / 7
- Mac OS 10.5 - 10.7
For Airplay ®
-iTunes 10 + for Windows or Mac PC
-iOS 4.3+ for iPad, iPhone or iPod Touch
What You Will Need to Get Started:
1.) Up to four USB Printers/Multifunction Printers, USB Speakers*, USB Scanner or
USB Storage Devices along with manufacturer’s driver/software CD (if needed)
2.) A Computer with a CD-ROM drive that is connected to your home network
3.) One Ethernet cable
*USB speakers required for Airplay ®
GETTING STARTED
STEP 1
Front View
PRODUCT OVERVIEW
Back View
Power LED: Lit when powered on
Wireless LED: Lit when device is
being used wirelessly
LAN LED: Lit when device is plugged
into the ethernet port on the back
USB Port LED 1-4: Lit when a
USB device is plugged into
the corresponding port on
the back
On/Off Switch
Power Adapter Connector: DC
IN for 12V/1.5A adapter
Init: Reset button, press and hold for
30 seconds to restore to factory
default.
LAN: 10/100M Ethernet
USB 2-4: USB Ports for
USB Devices
Antenna for WiFi
capability
STEP 2HARDWARE INSTALLATION
Step 2: Connecting Your Server to a Network
1.) Use a Ethernet cable (not provided) and
connect one end to the “Network” port
of the HMPS2U. Connect the other end
to an available LAN Port on your network
router.
2.) Plug in the power adaptor (included in
package) to power on the print server. Make
sure the On/OFF switch is set to “ON”.
STEP 3
Step 3A: Installing Software on Windows
1.) Insert Hawking software Setup CD.
2.) When the auto-load page appears, click
Setup Wizard.
3.) Click Next button in proceeding
installation windows until it completes.
SOFTWARE INSTALLATION
STEP 3
Step 3B: Installing Software on Mac
1.) Insert Hawking software Setup CD.
2.) When the setup page appears, click
on the HMPS2u Software
3.) Click on the the installer, choose
“Install” when the window comes
up.
4.) Type in your username/password for
the software to install
SOFTWARE INSTALLATION
Step 4: Configuring Your HMPS1U Print Server
1.) Open the Hawking Technologies HMPS2U
Control Center. While the program is running,
a Hawking icon should be displayed in your
system tray in Windows or in your dock on
Mac. Once opened it will automatically search
for the existing server and display its status.
SERVER CONFIGURATION
Windows
Mac
STEP 4
STEP 4
2.) Double click on the device on the
control center and it will open a
web browser showing the user
interface of the product
SERVER CONFIGURATION
Step 4: Configuring Your HMPS2U
3.) Click on “Config.” You will be prompted
to put in a username/password.
Username: admin
Password: admin
Autres manuels pour HMPS2U
1
Table des matières
Autres manuels Hawking Serveur
