Hawking HGA11 Manuel utilisateur

Table of Contents

Chapter 1 Introduction...................................................................................1

1.1 Package Contents...................................................................................2

1.2 Features.................................................................................................2

1.3 Specifications.........................................................................................2

1.4 Physical Description...............................................................................3

Chapter 2 Quick Installation.........................................................................6

2.1 Hardware Installation ............................................................................. 6

2.2 Getting Started.......................................................................................7

Chapter 3 Windows Setup Wizard...............................................................9

Chapter 4 Web Configuration.....................................................................20

4.1 Getting Started..................................................................................... 20

4.2 Configuring the Gaming Adapter.......................................................... 23

4.2.1 Status and Information ........................................................................................23

4.2.2 Wireless Setting..................................................................................................24

4.2.3 Advanced Setting ................................................................................................26

4.2.4 Encryption...........................................................................................................28

4.2.5 Wireless Site Survey...........................................................................................32

4.2.6 System Utility .....................................................................................................33

4.2.7 Configuration Tool..............................................................................................35

4.2.8 Firmware Upgrade ..............................................................................................37

4.2.9 Reset....................................................................................................................38

Chapter 5 Troubleshooting..........................................................................39

Introduction

Chapter 1 Introduction

Congratulations on the purchase of the Hawking Technologies Wireless Gaming

Adapter. This unique product gives you the power to play“Head to Head” or online

“Internet Gaming” on your PlayStation 2, Xbox or PC without wires! Usingstate-of-

the-art wireless technology, the Wireless Gaming Adapter, boasts high speed, zero

lag gaming.

The HGA11 supports wireless security (WEP) to prevent intruders from hacking into

your wireless network. It functions on the popular IEEE 802.11b wireless

networking standard, making it compatible with both IEEE 802.11g and IEEE

802.11g Wireless networks!

The HGA11 is equipped with a removable dipole antenna that is easily replaced with

anyone of Hawking’s Hi-Gain Antennas. If you wish to increase the wireless

distance of your Gaming Adapter or wish to use it in a back house or office,

Hawking’s line of Hi-Gain Antennas is the perfect solution. The Hi-Gain 24 Series,

WiFi Antenna line can be viewed on the Hawking website atwww.hawkingtech.com.

Installation and configuration of the Gaming Adapter is quick and simple. The Zero

Configuration feature automatically sets up the unit under your wireless network

settings.

Introduction

1.1 Package Contents

The Wireless Gaming Adapter package includes the following items:

ŸOne Wireless Gaming Adapter

ŸOne Power Adapter

ŸOne CD-ROM

ŸOne Quick Installation Guide

1.2 Features

ŸWireless Head to Head or Internet Gaming.

ŸSupports X-Box, PlayStation 2, and any Ethernet ready device.

ŸZero Configuration Feature–Simple installation.

ŸComplies with the IEEE 802.11b (DSSS) 2.4GHz wireless specifications.

ŸHigh data rate 11, 5.5, 2 and 1Mbps data transfer speeds.

ŸAuto rate fallback in case of obstacles or interferences.

ŸProvide 64/128-bit WEP Data Encryption function to protect the wireless

data transmissions.

ŸProvides Windows Utility and Web-based configuration.

1.3 Specifications

ŸStandards: IEEE 802.11b (Wireless), IEEE 802.3 (Wired)

ŸData Rate: 11/5.5/2/1Mbps auto fallback

ŸSecurity: 64/128-bit WEP Data Encryption

ŸFrequency Band: 2.400~2.4835GHz (Industrial Scientific Medical Band)

ŸModulation: CCK@11/5.5Mbps, DQPSK@2Mbps and DBPSK@1Mbps

ŸRadio Technology: Direct Sequence Spread Spectrum (DSSS)

ŸAntenna:External detachable dipole antenna (with RP-SMA connector)

ŸConnectors: 10/100Mbps RJ-45 x 1

ŸButton: Switch between “Head to Head mode (or Ad Hoc mode)”and

Internet Gaming Mode “Infrastructure mode”

ŸPower: 12VDC, 0.5A

ŸTransmit Power: 18dBm (Typical)

ŸLEDs: Power, LAN Link/Activity, Wireless Activity

Introduction

ŸDimension: 30(H) x 127(W) x 96(D) mm

ŸTemperature:

Operating: 32~131°F (0~55°C)

Storage: -4~158°F(-20~70°C)

ŸHumidity: 10-90% (Noncondensing)

ŸCertification: FCC, CE

1.4 Physical Description

Front Panel

On the Wireless Gaming Adapter’s front panel there are LED lights that inform you

of the Wireless Gaming Adapter’s status. Below is an explanation of each LED and

its function.

LED Color Status Description

Power Green Lit Power is supplied.

Flashing System is booting

Off No Power.

Status Yellow Flashing No Access Point detected.

Yellow On PC configuration

required (static IP detected

or multiple access points detected).

Green On Ready to use.

Head 2 Head

Green On Working in “Head to Head mode (or

Ad Hoc

mode)”.

Off Working in “Infrastructure mode”.

Introduction

On A valid link is established with the gaming

console.

Flash It is transmitting or receiving data.

Console Green

Off No link is established.

Back Panel

Wireless Gaming Adapter’sconnection ports are located on the back panel. Below is

the description of each connection port.

ŸAntenna Connector

The antenna connector is a RP-SMA antenna connector which is compatible with

all Hawking Technology range extending wireless antennas.

ŸDC Adapter Port

Insert thepower jack of the power adapter into this port.

ŸConsole Port

The Wireless Gaming Adapter’s console port is used to connect your gaming

console to the Gaming Adapter. Your gaming console must have a

network/Ethernet adapter with a RJ-45 port. (You may connect any Ethernet

ready device to this port however the Gaming Adapter has been designed to work

optimally with gaming consoles)

ŸHead 2 Head / Infrastructure button

Press this button to switch between “Head toHead mode”and“Internet Gaming

Mode.

Introduction

ŸReset

The Reset button allows you to do one of two things.

1) If problems occur with your Wireless Gaming Adapter, press the reset

button with a pencil tip (for less than 4 seconds) and the Wireless Gaming

Adapter will re-boot itself, keeping your original configurations.

2) If problems persist or you experience extreme problems or you forgot your

password, press the reset button for longer than 4 seconds and theWireless

Gaming Adapterwill reset itself to the factory default settings (warning:

your original configurations will be replaced with the factory default

settings).

Wireless LAN Access Point Connection

Chapter 2 Quick Installation

2.1 Hardware Installation

1. Connect the Wireless Gaming Adapter to your game console.

Connect one end of standard Ethernetcable to the Wireless Gaming Adapter’s

Console Port and connect the other end of the cable to the network adapter on

your gaming console.

2. Connect theDC Power Adapter to the Wireless Gaming Adapter’s Power

Socket.

Only use the power adapter supplied with the Wireless Gaming Adapter. Using a

different adapter may damage the product.

3. Check the LED.

Power on both the Wireless Gaming Adapter and your gaming console. The

“PWR”and “CONSOLE”LEDs of the Wireless Gaming Adapter should be lit.

Connect to a game console

Wireless LAN Access Point Connection

The Hardware Installation is complete.

2.2 Getting Started Using Zero Configuration

“Head to Head” Gaming Setup

1. If you have more than one game console and wish to connect these game

consoles together to play head to head games, you must switch the Wireless

Gaming Adapter to“Head to Headmode”. If the“Head 2 Head”LED is lit, then

the Wireless Gaming Adapter is already in“Head to Head mode.” If the“Head 2

Head”LED is not lit, press the“Head 2 Head/Infrastructure”button once and the

Wireless Gaming Adapter will switch to “Head to Head mode”automatically.

Once both units are in “Head to Head” gaming mode they should be able to

communicate with one another and a link can be established between multiple

gaming consoles with the Hawking Gaming Adapter. (Note: all gaming

consoles must be in wireless range of one another.)

2. When the Wireless Gaming Adapters are successfully connected, the“STATUS”

LED will be on and the led color should be green. If the STATUS led blinks

orange please skip to Chapter 3 in this manual for configuration via PC.

3. After all the Wireless Gaming Adapters are set to “Head to Head mode”and are

connected to your gaming consoles with a green Status led, you can start to enjoy

head to head games wirelessly.

Internet Gaming Mode Setup

1. Check to see if your gaming console’s network adapter is already configured for

internet gaming. (You can check this by connecting an Ethernet cable directly to

your console to connect it to your network. If you are able to play online games

then your networkadapter is already configured) If your gaming console’s

network adapter is not configured for your network you must do so first before

continuing this installation procedure. Please read your manufacturers

instruction manual to configure your network adapter.

Wireless LAN Access Point Connection

2. Connect your Wireless Gaming Adapter to your gaming console’s network

adapter port using a standard Ethernet cable.

3. Power On both the gaming console and your Gaming Adapter.

4. Check to see if the Head to Head LED on your gaming console is lit. If it is push

the Internet/Head to Head switch in the back of the Gaming Adapter to switch

the mode back to Internet Gaming Mode.

5. When the Wireless Gaming Adapter is successfully connected to your wireless

LAN, the “STATUS”LED will have a green lit led. If it does not, or blinks

orange, please skip to Chapter 3 in this manual to configure your Gaming

Adapter for your wireless network using your PC.

6. After the Wireless Gaming Adapter been set to“Internet mode”and is connected

to your gaming console, you may start to enjoy your favorite online games

wirelessly.

Autres manuels pour HGA11

Table des matières

Autres manuels Hawking Adaptateur

Hawking

Hawking H-WU300 Manuel utilisateur

Hawking

Hawking HBTC1 Manuel utilisateur

Hawking

Hawking HW12ACU Manuel utilisateur

Hawking

Hawking HPOE1 Manuel utilisateur

Hawking

Hawking HWU54DMA Manuel utilisateur

Hawking

Hawking Hi-Gain HAWNU2 Manuel utilisateur

Hawking

Hawking HAWNU1 Manuel utilisateur

Hawking

Hawking HWL2A Manuel utilisateur

Hawking

Hawking Hi-Gain Manuel utilisateur

Hawking

Hawking HWDN2 Manuel utilisateur

Hawking

Hawking HWUG1 Manuel utilisateur

Hawking

Hawking HUF2 Manuel utilisateur

Hawking

Hawking HGA11 Manuel utilisateur

Hawking

Hawking HWU9DD Manuel utilisateur

Hawking

Hawking HWUN1A Wireless-N USB Adapter HWUN1A Manuel utilisateur

Hawking

Hawking HBTC2 Manuel utilisateur

Hawking

Hawking HWC54D Manuel utilisateur

Hawking

Hawking HWUG1 Manuel utilisateur

Hawking

Hawking USB 10/100 Mbps Manuel utilisateur

Hawking

Hawking HWUN4 Manuel utilisateur

Hawking

Hawking HWL2A Manuel utilisateur

Hawking

Hawking H-BT10U Manuel utilisateur

Hawking

Hawking WU250 Manuel utilisateur

Hawking

Hawking HWU8DD Manuel utilisateur

Manuels Adaptateur populaires d'autres marques

PCB Piezotronics

PCB Piezotronics 090B274 Manuel utilisateur

Auvidea

Auvidea J20 Manuel du produit

Gossen MetraWatt

Gossen MetraWatt AT3-III E Manuel utilisateur

Akribis

Akribis ITF-21-BISS-MIT Manuel utilisateur

Tenda

Tenda W54U Manuel utilisateur

ROHO

ROHO AGILITY Manuel utilisateur

PROLiNK

PROLiNK WN2001 Manuel utilisateur

Airlink101

Airlink101 AWLC4030 Manuel utilisateur

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Manuel utilisateur

Philips

Philips SWA4554S/10 Manuel utilisateur

JVC

JVC TS-C9D2B Manuel d'instructions

NETGEAR

NETGEAR A6100 Manuel utilisateur

D-Link

D-Link DWA-121 Manuel utilisateur

Philips

Philips SWA2037 Manuel utilisateur

Basalte

Basalte 0610-20 Manuel utilisateur

Yealink

Yealink EHS40 Manuel utilisateur

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Manuel utilisateur

RCA

RCA AH57R Manuel utilisateur