HAWEKA AirgoLift Manuel utilisateur
AirgoLift
Wheel Lifting Device for Wheel Balancers
Item No. 916 000 017
Item No. 916 000 021
Operating Instructions
(Translation of the Original Operating Instructions)
HAWEKA AG • Kokenhorststrasse 4 • D-30938 Burgwedel • Tel. +49 5139/8996-0 • Fax +49 5139/8996-222
• www.haweka.com • info@haweka.com
Subject to technical modifications. Reprinting and copies, including extracts, are only permitted with written authorisation
GEB 001 166
Wheel Lifting Device AirgoLift
HAWEKA - AirgoLift
2
Table of Contents
1. General Safety Instructions ..........................................................................................3
1.1 Explanation of symbols..............................................................................................3
2. Product Description ......................................................................................................4
2.1 Authorised intended use............................................................................................4
2.2 Transport weight and dimensions..............................................................................4
2.3 Technical Data...........................................................................................................5
2.4 Dimensions................................................................................................................5
2.5 Description of device .................................................................................................6
3. Installation and Commissioning....................................................................................7
3.1 Assembly of the AirgoLifts.........................................................................................7
3.2 Function check...........................................................................................................9
3.3 Position in front of the wheel balancer.....................................................................10
4. Application and Operation ..........................................................................................12
5. Maintenance and Care ...............................................................................................13
5.1 General Care...........................................................................................................13
5.2 Setting the Lifting Speed..........................................................................................13
6. Troubleshooting and their Causes..............................................................................14
7. Spare Parts.................................................................................................................15
8. Pneumatic Diagram....................................................................................................17
9. EC Declaration of Conformity.....................................................................................18
Last updated: November 2019
Subject to technical modifications.
Version 2.0
Figures: HAWEKA AG / D-30938 Burgwedel
Reproduction in any form is not permitted.
Wheel Lifting Device AirgoLift
HAWEKA - AirgoLift
3
1.General Safety Instructions
The AirgoLift has been designed and built after careful selection
of applicable harmonised standards. Thus, it conforms to the
current state-of-the-art technology and provides the highest
degree of safety during operation.
Structural modifications to the wheel lifting device must
only be carried out with previous written authorisation from
the manufacturer!
Device safety can only be implemented during practical
operation if all required applicable measures have been taken.
The operator’s duty of care includes planning such measures
and checking their implementation.
In particular, the operator has to ensure that
the device is only used for its intended purpose
the device is only used in a fully functioning state and free from
defects
the complete operating instructions are permanently available in
a readable condition at the operating location of the device
the device is only operated by accordingly qualified and
authorised personnel
personnel are regularly instructed in all relevant health and
safety issues and are familiar with the operating instructions, in
particular with the safety instructions contained therein
1.1 Explanation of symbols
These operating instructions contain specific safety instructions. The following symbols are
used for this purpose:
This symbol indicates potential danger to the device and material.
Warning if injuries
This symbol indicates potential danger to persons.
This symbol does not indicate a safety instruction; it labels
information provided for a better understanding of work procedures.
Wheel Lifting Device AirgoLift
HAWEKA - AirgoLift
4
2.Product Description
2.1 Authorised intended use
The AirgoLift has been developed and constructed to easily and
comfortably lift vehicle wheels that must be
installed on a wheel balancer.
The AirgoLift is exclusively used to raise and lower vehicle wheels in conjunction
with a wheel balancer.
The AirgoLift must only be used for wheels up to 70 kg and
a max. diameter of 900 mm (36 inch).
When correctly used, the wheel lifting device AirgoLift enables a wheel to be correctly
clamped on the shaft of the wheel balancer.
During the clamping procedure, there is no loading of the wheel on the shaft and no
pretension occurs in the connection!
2.2 Transport weight and dimensions
Transport weight: 40,5 kg
Carton Dimensions: (L x W x H) 115 x 60 x 33 cm
Wheel Lifting Device AirgoLift
HAWEKA - AirgoLift
5
2.3 Technical Data
2.4 Dimensions
All data in mm
Dimensioning for the floor attachment, refer to Page 11
Compressed air supply
6 –8 bar
Operating pressure
7 bar
Max. lifting height
480 mm
Max. horizontal travel
720 mm
Max. lifting weight
70 kg
Max. wheel diameter
36 inch
Weight:
35 kg (net)
Wheel Lifting Device AirgoLift
HAWEKA - AirgoLift
6
2.5 Description of device
The AirgoLift comprises of a stable base frame that must be firmly attached to the floor by
bolts (refer to Point 3.3 Page 11)
The lifting unit is raised and lowered using a pneumatic bellow cylinder. During the lifting
procedure, the safety blind is also automatically raised. Control of the bellow cylinder is
carried out using the manual turning handle. Depending on the direction of lift required, the
turning handle must be rotated to the left or right.
The complete wheel lifting device only operates using air pressure.
No electrical connection is required.
Guide bar
Turning handle
Locating pin for
clamping device
Locating surface
Compressed air connection
Safety blind
Carriage
(Fig. 1)
Wheel contact surface
with wheel recess
Wheel Lifting Device AirgoLift
HAWEKA - AirgoLift
7
3.Installation and Commissioning
Before working with the device, carefully and completely
read the User Instructions.
Make sure that no damage has occurred to the device
during transportation.
Do not use the device in a moist environment.
Generally, protect the device from the wet.
It is important to know and investigate which air pressure is
available at the location of connection.
If the compressed air applied at the connection is > 8 bar,
a pressure reducer must be installed upstream!
3.1 Assembly of the AirgoLifts
The AirgoLift is already preassembled sot that only the guide bar must be installed.
For assembly, a commercial 10 mm open-ended or ring spanner is required.
For easy and quick assembly, we recommend to first leave the AirgoLift in the
packaging (Fig. 2) and to install the guide bar on the shifting plate. (Fig. 3)
(Fig. 2)
Wheel Lifting Device AirgoLift
HAWEKA - AirgoLift
8
The guide bar is already connected to the compressed air hoses and drag chain
on the base frame. Thus, it cannot be lifted freely from the packaging.
Align the guide bar and place on the 4 stud bolts on the carriage.
Using 4 cap nuts and washers (in the scope of delivery) firmly attach the guide bar to
the carriage. (Fig. 4)
Do not lift out from the side below the guide rails. The
wheel lifting device pulls apart when lifted.
Risk of entrapment. when placing down, because the
wheel lifting device again retracts to its initial position.
Lift the wheel lifting device at the long sides.
(Fig. 3)
(Fig. 4)
(Fig. 4)
4 × washer
4 × M6 cap nut
Wheel Lifting Device AirgoLift
HAWEKA - AirgoLift
9
After the AirgoLift is completely assembled and stands on the floor, the compressed air
supply can be connected using a commercial, standard coupling.
If an air pressure of more than 8 bar is present at the supply line,
a pressure reducer must be installed upstream!
If routing the compressed air hose on passageways, make sure that there are no
areas of tripping on the ground!
3.2 Function check
At the initial function check, make sure that the lifting unit can freely move up and down.
At initial commissioning, keep clear of the moving parts!
(Fig. 5)
Compressed air
connection
Wheel Lifting Device AirgoLift
HAWEKA - AirgoLift
10
UPWARDS
Slowly rotate the turning handle downwards.
The contact raises for the duration of activation.
Pay attention to the scissors lifting scaffolding!
The AirgoLift must be able to be extended to the
stop without malfunction.
Displace the contact surface and make sure
that the guides operate freely.
Push the carriage back to the initial position.
DOWNWARDS
Slowly rotate the turning handle in the opposite direction upwards.
By selecting the lowering motion, the contact lowers to the bottom end position.
If changes regarding the lifting speed are required, refer to from Point 5,
Maintenance and Care.
3.3 Position in front of the wheel balancer
The AirgoLift must be positioned so that the contact surface is central to the shaft of the
wheel balancer. (Fig. 7 / 8)
(Fig. 6)
(Fig. 8)
(Fig. 7)
Table des matières
Manuels Système de levage populaires d'autres marques
morse
morse 82H-124 Manuel utilisateur
Braun
Braun NL955 Series Manuel utilisateur
haacon
haacon 1889.10 Manuel utilisateur
Protekt
Protekt AT 252 Manuel utilisateur
R. Beck Maschinenbau
R. Beck Maschinenbau HS 600 Manuel utilisateur
Nova Technology International, LLC
Nova Technology International, LLC NAS Series Manuel utilisateur
Genie
Genie Z-60/34 Manuel utilisateur
Screen Technics
Screen Technics INTERFIT Vertical Up Lift Manuel utilisateur
Mortuary Lift
Mortuary Lift ULTIMATE 1000 Manuel utilisateur
Custom Equipment
Custom Equipment Hy-Brid 3 Series Manuel de programmation
Custom Equipment
Custom Equipment Hy-Brid Lifts 2 Series Manuel de programmation
Hy-Brid Lifts
Hy-Brid Lifts HB-P3.6 Manuel de programmation
