Harmonic MediaGrid ContentBridge 4000 Manuel utilisateur
Harmonic MediaGrid ContentBridge
Release 5.0
Installation Guide
Revision B
Manual Part No. N/A
October 2018
Copyright © 2017–2018 Harmonic Inc. All rights reserved. Harmonic, the Harmonic logo, Omneon, the Omneon logo, [all other Harmonic products
mentioned] are trademarks, registered trademarks or service marks of Harmonic Inc. in the United States and other countries. Dolby, Dolby Digital,
Dolby Digital Plus and Dolby E are registered trademarks of Dolby Laboratories. Implementations of AAC and HE-AAC by Fraunhofer IIS. Other
company, product and service names mentioned herein may be trademarks or service marks of their respective owners. All product and application
features and specifications are subject to change at Harmonic's sole discretion at any time and without notice.
Disclaimer
Harmonic® reserves the right to alter the product specifications and descriptions in this publication without prior notice. No part of this publication
shall be deemed to be part of any contract or warranty unless specifically incorporated by reference into such contract or warranty. The information
contained herein is merely descriptive in nature, and does not constitute a binding offer for sale of the product described herein. Harmonic assumes
no responsibility or liability arising from the use of the products described herein, except as expressly agreed to in writing by Harmonic. The use and
purchase of this product does not convey a license under any patent rights, copyrights, trademark rights, or any intellectual property rights of Harmonic.
Nothing hereunder constitutes a representation or warranty that using any product in the manner described herein will not infringe any patents of third
parties.
Third-party product trademarks
Adobe® After Effects®, Photoshop®, Flash® Professional, Premiere®
Avid® Media Composer®
Jünger Audio™
Apple® QuickTime®
Microsoft® Mediaroom®
Microsoft PlayReady®
DOCSIS® 3.0
Start Over® TV
Dolby is a registered trademark of Dolby Laboratories.
Dolby Digital, Dolby Digital Plus, Dolby Pulse, aacPlus, AC-3, and Dolby® E are trademarks of Dolby Laboratories.
Level Magic and Jünger are trademarks of Jünger Audio Studiotechnik GmbH.
MPEG Audio technology licensed from Fraunhofer IIS http://www.iis.fraunhofer.de/amm/.
PitchBlue® is a registered trademark of Vigor Systems.
QuickTime and the QuickTime logo are trademarks or registered trademarks of Apple Computer, Inc., used under license therefrom.
Third-party copyright notes
Harmonic software uses version 3.15.4 of the FreeImage open source image library under FreeImage Public License (FIPL). See http://
freeimage.sourceforge.net for details. The product may include implementations of AAC and HE-AAC by Fraunhofer IIS; and MPEG Audio technology
licensed from Fraunhofer IIS.
The software described in this publication may use version 2.8 of FFmpeg open source package under Lesser General Public License (LGPL).
The software described in this publication is furnished under a nondisclosure agreement, or the License Agreement and Limited Warranty stated below,
and the end user license agreement (which is furnished with the software), which may have additional terms. The software may be used or copied only
in accordance with the terms of those agreements. By using the software, you acknowledge you have read the end user license agreement and the
License Agreement and Limited Warranty provision.
The product described in this publication maybe covered by one or more of U.S. Patents, their foreign counterparts and pending patent applications.
The product is distributed with certain other software that may require disclosure or distribution of licenses, copyright notices, conditions of use,
disclaimers and/or other matter. Use of this product or otherwise fulfilling their conditions constitutes your acceptance of it, as necessary. Copies of
such licenses, notices, conditions, disclaimers and/or other matter are available in any one of the following locations: the LEGAL NOTICES AND
LICENSES section of the documentation directory of the product, user guide, or by contacting us at [email protected].
Notice
Information contained in this publication is subject to change without notice or obligation. While every effort has been made to ensure that the
information is accurate as of the publication date, Harmonic Inc. assumes no liability for errors or omissions. In addition, Harmonic Inc.assumes no
responsibility for damages resulting from the use of this guide.
License agreement and limited warranty
1. AGREEMENT: This is a legal agreement ("Agreement") between you ("you" or "your") and Harmonic, or its appropriate local affiliate ("Harmonic",
"we", "us" or "our"). Use of our product(s) and any updates thereto purchased or validly obtained by you (the "Products"), and/or the Software (as
defined below) (collectively, the "System"), constitutes your acceptance of this Agreement. "Use" includes opening or breaking the seal on the
packet containing this Agreement, installing or downloading the Software as defined below or using the Software preloaded or embedded in your
System. As used herein, the term "Software" means the Harmonic owned software and/or firmware used in or with the Products and embedded
2
into, provided with or loaded onto the Products in object code format, but does not include, and this Agreement does not address, any third-party
or free or open source software separately licensed to you ("Third Party Software"). If you do not agree to this Agreement, you shall promptly
return the System with a dated receipt to the seller for a full refund.
2. LICENSE: Subject to the terms and conditions of this Agreement (including payment), we hereby grant you a nonexclusive, nontransferable
license to use the object code version of the Software embedded into, provided solely for use with or loaded onto the Product, and the
accompanying documentation ("Documentation") for your internal business purposes. The Software and any authorized copies are owned by us
or our suppliers, and are protected by law, including without limitation the copyright laws and treaties of the U.S.A. and other countries. Evaluation
versions of the Software may be subject to a time-limited license key.
3. RESTRICTIONS: You (and your employees and contractors) shall not attempt to reverse engineer, disassemble, modify, translate, create
derivative works of, rent, lease (including use on a timesharing, applications service provider, service bureau or similar basis), loan, distribute,
sublicense or otherwise transfer the System, in whole or part except to the extent otherwise permitted by law. The Software may be operated
on a network only if and as permitted by its Documentation. You may make one (1) back up copy of the object code of the Software for archival
purposes only. Evaluation Software will be run in a lab, nonproductive environment. Results of any benchmark or other performance tests may
not be disclosed to any third party without our prior written consent. Title to and ownership of the Software and Documentation, and all copyright,
patent, trade secret, trademark, and other intellectual property rights in the System, shall remain our or our licensors' property. You shall not
remove or alter any copyright or other proprietary rights notice on the System. We reserve all rights not expressly granted.
4. LIMITED WARRANTY: (a) Limited Warranty. We warrant to you that, commencing on your receipt of a Product and terminating 1 year thereafter,
the System will perform substantially in accordance with its then-current appropriate Documentation. The Product (including replacements) may
consist of new, used or previously-installed components. (b) Remedies. If the System fails to comply with such warranty during such period,
as your sole remedy, you must return the same in compliance with our product return policy, and we shall, at our option, repair or replace the
System, provide a workaround, or refund the fees you paid. Replacement Systems are warranted for the original System's remaining warranty
period. (c) Exclusions. EVALUATION SOFTWARE IS LICENSED ON AS-IS BASIS AND SUBJECT TO 4(d). We will have no obligation under
this limited warranty due to: (i) negligence, misuse or abuse of the System, such as unusual physical or electrical stress, misuse or accidents;
(ii) use of the System other than in accordance with the Documentation; (iii) modifications, alterations or repairs to the System made by a party
other than us or our representative; (iv) the combination, operation or use of the System with equipment, devices, software or data not supplied by
us; (v) any third party hardware or Third Party Software, whether or not provided by us; (vi) any failure other than by us to comply with handling,
operating, environmental, storage or maintenance requirements for the System in the Documentation, including, without limitation, temperature
or humidity ranges. (d) Disclaimers. We are not responsible for your software, firmware, information, or data contained in, stored on, or integrated
with any Product returned to us for repair or replacement. SUCH LIMITED WARRANTY IS IN LIEU OF, AND WE SPECIFICALLY DISCLAIM,
ANY AND ALL OTHER WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED
WARRANTIES OF SATISFACTORY QUALITY, MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT.
WE DO NOT WARRANT THAT THE SYSTEM WILL MEET YOUR REQUIREMENTS OR BE UNINTERRUPTED OR ERROR-FREE. NO
ADVICE OR INFORMATION, WHETHER ORAL OR WRITTEN, OBTAINED FROM US OR ELSEWHERE, WILL CREATE ANY WARRANTY NOT
EXPRESSLY STATED IN THIS AGREEMENT. Some jurisdictions do not allow the exclusion of implied warranties or limitations on how long an
implied warranty may last, so such exclusions may not apply to you. In that event, such implied warranties or limitations are limited to 60 days from
the date you purchased the System or the shortest period permitted by applicable law, if longer. This warranty gives you specific legal rights and
you may have other rights which vary from state to state or country to country.
5. LIMITATION OF LIABILITY: WE AND OUR AFFILIATES, SUPPLIERS, LICENSORS, OR SALES CHANNELS ("REPRESENTATIVES") SHALL
NOT BE LIABLE TO YOU FOR ANY SPECIAL, INCIDENTAL, CONSEQUENTIAL, PUNITIVE, OR EXEMPLARY DAMAGES OF ANY KIND,
INCLUDING BUT NOT LIMITED TO LOST REVENUES, PROFITS OR SAVINGS, OR THE COST OF SUBSTITUTE GOODS, HOWEVER
CAUSED, UNDER CONTRACT, TORT, BREACH OF WARRANTY, NEGLIGENCE, OR OTHERWISE, EVEN IF WE WERE ADVISED OF
THE POSSIBILITY OF SUCH LOSS OR DAMAGES. NOTWITHSTANDING ANY OTHER PROVISIONS OF THIS AGREEMENT, WE AND
OUR REPRESENTATIVES' TOTAL LIABILITY TO YOU ARISING FROM OR RELATING TO THIS AGREEMENT OR THE SYSTEM SHALL
BE LIMITED TO THE TOTAL PAYMENTS TO US UNDER THIS AGREEMENT FOR THE SYSTEM. THE FOREGOING LIMITATIONS SHALL
NOT APPLY TO DEATH OR PERSONAL INJURY TO PERSONS OR TANGIBLE PROPERTY IN ANY JURISDICTION WHERE APPLICABLE
LAW PROHIBITS SUCH LIMITATION. YOU ARE SOLELY RESPONSIBLE FOR BACKING UP YOUR DATA AND FILES, AND HEREBY
RELEASE US AND OUR REPRESENTATIVES FROM ANY LIABILITY OR DAMAGES DUE TO THE LOSS OF ANY SUCH DATA OR FILES.
SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO SUCH
EXCLUSIONS MAY NOT APPLY TO YOU.
6. CONFIDENTIALITY: Information in the System and the associated media, as well as the structure, organization and code of the Software, are
proprietary to us and contain valuable trade secrets developed or acquired at great expense to us or our suppliers. You shall not disclose to others
or utilize any such information except as expressly provided herein, except for information (i) lawfully received by the user from a third party which
is not subject to confidentiality obligations; (ii) generally available to the public without breach of this Agreement; (iii) lawfully known to the user
prior to its receipt of the System; or (iv) required by law to be disclosed.
7. SUPPORT: Updates, upgrades, fixes, maintenance or support for the System (an "Upgrade") after the limited warranty period may be available
at separate terms and fees from us. Any Upgrades shall be subject to this Agreement, except for additional or inconsistent terms we specify.
Upgrades do not extend the limited warranty period.
8. TERM; TERMINATION: The term of this Agreement shall continue unless terminated in accordance with this Section. We may terminate this
Agreement at any time upon default by you of the license provisions of this Agreement, or any other material default by you of this Agreement not
cured with thirty (30) days after written notice thereof. You may terminate this Agreement any time by terminating use of the System. Except for the
first sentence of Section 2 ("License") and for Section 4(a) ("Limited Warranty"), all provisions of this Agreement shall survive termination of this
Agreement. Upon any such termination, you shall certify in writing such termination and non-use to us.
9. EXPORT CONTROL: You agree that the Products and Software will not be shipped, transferred, or exported into any country or used in any
manner prohibited by the United States Export Administration Act or any other export laws, restrictions, or regulations (the "Export Laws"). You
will indemnify, defend and hold us harmless from any and all claims arising therefrom or relating thereto. In addition, if the Products or Software
are identified as export controlled items under the Export Laws, you represent and warrant that you are not a citizen, or otherwise located within,
an embargoed nation (including without limitation Iran, Iraq, Syria, Sudan, Libya, Cuba, North Korea, and Serbia) and that you are not otherwise
prohibited under the Export Laws from receiving the Software. All rights to the Products and Software are granted on condition that such rights are
forfeited if you fail to comply with the terms of this Agreement.
10. U.S. GOVERNMENT RIGHTS: The Software and the documentation which accompanies the Software are "Commercial Items," as that term
is defined at 48 C.F.R. §2.101, consisting of "Commercial Computer Software" and "Commercial Computer Software Documentation," as such
terms are used in 48 C.F.R. §12.212 or 48 C.F.R. §227.7202, as applicable. Consistent with 48 C.F.R. §12.212 or 48 C.F.R. §§227.7202-1 through
3 Harmonic MediaGrid 5.0 Installation Guide
227.7202-4, as applicable, the Commercial Computer Software and Commercial Computer Software Documentation are being licensed to U.S.
Government as end users (a) only as Commercial Items and (b) with only those rights as are granted to all other end users pursuant to the terms
and conditions herein. Harmonic, 4300 North First Street, San Jose, CA 95134, U.S.A.
11. GENERAL:You shall not assign, delegate or sublicense your rights or obligations under this Agreement, by operation of law or otherwise, without
our prior written consent, and any attempt without such consent shall be void. Subject to the preceding sentence, this Agreement binds and
benefits permitted successors and assigns. This Agreement is governed by California law, without regard to its conflicts of law principles. The U.N.
Convention on Contracts for the International Sale of Goods is disclaimed. If any claim arises out of this Agreement, the parties hereby submit
to the exclusive jurisdiction and venue of the federal and state courts located in Santa Clara County, California. In addition to any other rights or
remedies, we shall be entitled to injunctive and other equitable relief, without posting bond or other security, to prevent any material breach of this
Agreement. We may change the terms, conditions and pricing relating to the future licensing of our Systems and other intellectual property rights,
including this Agreement, from time to time. No waiver will be implied from conduct or failure to enforce rights nor effective unless in a writing
signed on behalf of the party against whom the waiver is asserted. If any part of this Agreement is found unenforceable, the remaining parts will
be enforced to the maximum extent permitted. There are no third-party beneficiaries to this Agreement. We are not bound by additional and/or
conflicting provisions in any order, acceptance, or other correspondence unless we expressly agree in writing. This Agreement is the complete and
exclusive statement of agreement between the parties as to its subject matter and supersedes all proposals or prior agreements, verbal or written,
advertising, representations or communications concerning the System.
Every reasonable attempt has been made to comply with all licensing requirements for all components used in the system. Any oversight is
unintentional and will be remedied if brought to the attention of Harmonic at [email protected].
Documentation conventions
In Harmonic documents, special symbols and fonts call your attention to important information.
DANGER: The Danger symbol indicates information that, if ignored, can cause physical
harm to you.
CAUTION: The Caution symbol indicates information that, if ignored, can adversely affect
the performance of your Harmonic product, or that can make a procedure needlessly
difficult.
NOTE: The Note symbol indicates especially important information you need, or it may
provide additional information that applies in only some carefully delineated circumstances.
IMPORTANT: The Important symbol indicates information that should stand out when you
are reading product details and procedural information.
TIP: The Tip symbol indicates parenthetical information that is not necessary for
performing a given procedure, but which, if followed, makes the procedure easier,
smoother, or more efficient.
In addition to these symbols, this guide may use the following text conventions:
Convention Explanation
Typed Command Indicates the text that you type in at the keyboard prompt.
Ctrl, Ctrl + Shift A key or key sequence to press.
http://www.harmonicinc.com The italics in blue text to indicate Cross-references, and
hyperlinked cross-references in online documents.
Bold Indicates a button to click, or a menu item to select.
Screen Output The text that is displayed on a computer screen.
Emphasis The italics text used for emphasis and document references.
4
Table of Contents
Chapter 1: ContentBridge 4000 hardware.................................................................................... 7
Bezel components...............................................................................................................................7
Bezel status LED indicators............................................................................................................8
Front panel components......................................................................................................................8
Control panel buttons and LED indicators...................................................................................... 9
Drive LED indicators...................................................................................................................10
Rear panel components.................................................................................................................... 11
1 Gigabit Ethernet NIC Indicators...............................................................................................12
10 Gigabit Ethernet Eth Indicator................................................................................................12
Power supply indicators..............................................................................................................13
Chapter 2: System installation with the ContentBridge 4000.....................................................14
Site preparation............................................................................................................................... 14
Required components................................................................................................................. 15
Unpacking the system.................................................................................................................15
Hardware Installation overview......................................................................................................... 15
Rack mounting the ContentBridge 4000...................................................................................... 15
Connecting the ContentBridge to the network switch.....................................................................19
Software Installation overview........................................................................................................... 20
Initial configuration.................................................................................................................... 21
Configuring ContentBridge 4000 with Embedded Management.................................................... 21
Accessing the ContentBridge 4000 through built-in accounts.........................................................23
Chapter 3: Joining a ContentBridge to Harmonic MediaGrid with Local User
Authentication.................................................................................................................................... 25
Creating Passwordless SSH Access from the ContentBridge to multiple Harmonic MediaGrid
ContentDirector units.........................................................................................................................25
Setting up the second ContentDirector unit.........................................................................................26
Setting up the ContentBridge.............................................................................................................27
Configuring omauthremote.conf.........................................................................................................27
Appendix A: Harmonic Technical Assistance Center contact information................................ 29
Harmonic corporate contact information............................................................................................30
Appendix B: Safety and regulatory compliance information..................................................... 31
Important safety instructions.............................................................................................................. 31
Safety symbols & safety, warning & caution instructions..................................................................... 32
Symboles de sécurité de sécurité, d'avertissement et Attention Instructions............................................ 34
Sicherheit Symbole und Sicherheit, Achtung & Vorsicht Anleitung........................................................37
5
Harmonic MediaGrid ContentBridge
Preparing the site.............................................................................................................................41
Disassembling an end-of-life product.................................................................................................43
Safety rules (English)........................................................................................................................ 44
Règles de sécurité.............................................................................................................................44
EU manufacturer’s Declaration of Conformity.....................................................................................44
Electromagnetic compatibility notices – Class A..................................................................................44
Product regulatory compliance.......................................................................................................... 46
Product regulatory compliance markings............................................................................................47
Product environmental compliance.....................................................................................................48
EU RoHS................................................................................................................................... 49
EU REACH.................................................................................................................................49
China RoHS...............................................................................................................................50
Taiwan BSMI RoHS.....................................................................................................................51
Other RoHS and REACH type regulations....................................................................................52
Waste Electrical and Electronic Equipment (WEEE).......................................................................52
Battery directive......................................................................................................................... 53
WEEE Take-Back Request Program..............................................................................................53
Compliance with country specific environmental, safety and EMC standards.........................................54
6
Chapter 1
ContentBridge 4000 hardware
The Harmonic MediaGrid ContentBridge 4000 provides access to Harmonic MediaGrid for those client
platforms that do not have the FSD installed or do not use the Harmonic MediaGrid API.
•Bezel components
•Front panel components
•Rear panel components
Bezel components
The bezel on the ContentBridge 4000 consists of a power indicator, air vents, and status LEDs.
Figure 1-1: Bezel components
Component Description
1. Power Indicator A bright blue power indicator is provided across the
top of the front panel. This indicator also provides
a “wink” function, which allows you to identify a unit
from the SystemManager application.
2. Air vents Allows airflow through the unit. For optimum
airflow, do not obstruct the air vents.
3. Status LEDs An array of four status LEDs is provided on the
front panel.
7
Chapter 1: ContentBridge 4000 hardware
Bezel status LED indicators
The status indicators on the ContentBridge 4000 bezel provide information about network connectivity
and disk drive status.
Figure 1-2: ContentBridge 4000 status indicators
LED Color/State Description
White Both ports are working normally.
Yellow 10 GbE port 2 is non-functional.
Magenta 10 GbE port 3 is non-functional.
10 GbE NIC
Red Both 10 GbE connections have failed.
HA Pair Indicator Currently unused
White Drive is online.
Yellow Drive replacement warning.
Solid State Drive
Indicators 0 and 1
Red A drive failure has occurred.
Front panel components
Find important information about the components on the front panel of the ContentBridge 4000.
Figure 1-3: Front panel components
Indicator, Button, or Connector Description
1. System label pull-out tab Use to apply a product number and/or serial number label.
2. LCD panel Displays system ID, status information, and system error
messages.
8
Front panel components
Indicator, Button, or Connector Description
• Blue indicates normal system operation.
• Amber indicates a system error; an error code is also
displayed, followed by descriptive text.
3. LCD menu buttons Allow you to navigate the LCD panel menu.
4. USB connector (2) Use to connect the front bezel.
5. Control panel Contains system status LEDs, hard reset button, and other
system controls.
6. Solid-state drive 0 The High Bandwidth ContentBridge 4000 uses two solid-
state drives.
7. Solid-state drive 1 The High Bandwidth ContentBridge 4000 uses two solid-
state drives.
Control panel buttons and LED indicators
Some control panel buttons on the ContentBridge 4000 are recessed and require a tool to use them.
Figure 1-4: Control panel buttons and indicators
Component Description
1. System ID button with integrated LED The identification button can be used to locate a particular
system within a rack. When this button is pressed, the
ID LEDs on the front panel and on the back edge of the
server board (viewable from the rear panel) flash until the
button is pressed again.
2. Non-maskable interrupt (NMI) button
(recessed, tool required for use)
The NMI button can be used to put the server into a halt
state when diagnosing an issue. To prevent an accidental
system halt, the physical button is located behind the
Control Panel and is only accessible with the use of a
small tipped tool.
3. NIC 0 Activity LED When a network link is detected, the LED will turn on solid.
The LED blinks when data is being sent or received over
the network.
4. NIC 1 Activity LED
5. System cold reset button (recessed, tool
required for use)
When pressed, this button initializes a hard system reset.
To prevent an accidental reset, the physical button is
9 Harmonic MediaGrid 5.0 Installation Guide
Chapter 1: ContentBridge 4000 hardware
Component Description
located behind the Control Panel and is only accessible
with the use of a small tipped tool.
6. System status LED Shows the current health of the server system. A second
system status LED is located on the back edge of the
server board and is viewable from the rear panel. Both
LEDs will show the same state.
7. Drive activity LED Indicates drive activity.
8. Power/Sleep button with integrated LED Toggles the power on and off. The power-on indicator
lights green when the system power is on. When the
power-on indicator is off, this indicates that no power is
supplied to the system.
Table 1-1: System status LED indicators
Color State Description
Off System is off.
Solid System is on and operating normally.Green
Blink Non-critical warning: The system is operating
in a redundant or degraded state but still
functional. A loss of redundancy may have
occurred, such as a power supply unit or fan.
Blink Non-fatal warning: The system is likely to fail,
but is still working. A critical threshold may have
been crossed, such as temperature or voltage,
or a disk drive failure has occurred.
Amber
Solid Fatal alarm: The system has failed or shut
down.
Drive LED indicators
Learn the LED patterns for both the Status and Activity indicators on the ContentBridge 4000.
Figure 1-5: ContentBridge 4000 drive LED indicators
IMPORTANT: If replacing a drive, do not turn off power. As soon as the new drive is
inserted, the system will begin replicating the data from the other drives.
10
Table des matières
Manuels Point d'accès sans fil populaires d'autres marques
D-Link
D-Link DWL-2100AP - AirPlus Xtreme G Manuel utilisateur
Ubiquiti
Ubiquiti NanoStation NSM2 Manuel utilisateur
Cisco
Cisco Aironet 1550 Series Manuel utilisateur
Aruba
Aruba IAP-335 Manuel utilisateur
Advantek Networks
Advantek Networks AWN-AP-54MR Manuel utilisateur
IP-COM
IP-COM AP355 Manuel utilisateur
