Harbor Breeze 40048 Manuel utilisateur

Questions, problems, missing parts? Before returning to your retailer, call our customer

service department at 1-800-643-0067, 8 a.m. - 6 p.m., EST, Monday - Thursday, 8 a.m. - 5 p.m.,

EST, Friday.

Harbor Breeze® is a registered trademark

ATTACH YOUR RECEIPT HERE

Purchase Date _________________________

Español p. 19

EB16263

ITEM #0609448

SAIL STREAM

CEILING FAN

MODEL #40048

TABLE OF CONTENTS

Package Contents .................................................................3

Hardware Contents ................................................................4

Safety Information .................................................................5

Preparation ......................................................................6

Initial Installation ..................................................................7

Wiring ..........................................................................9

Final Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Operating Instructions .............................................................14

Care and Maintenance ............................................................15

Troubleshooting..................................................................15

Warranty .......................................................................17

Replacement Parts List ............................................................18

PACKAGE CONTENTS

PART DESCRIPTION QUANTITY

A Mounting Bracket 1

B Canopy (preassembled to Motor Assembly [C]) 1

C Motor Assembly 1

D Fitter Plate (preassembled to Motor Assembly [C]) 1

E Switch Housing 1

F Light Pan 1

G Locking Ring (preassembled to Bowl Housing [H]) 1

H Bowl Housing 1

I Glass Bowl (preassembled to Bowl Housing [H]) 1

J Blade 3

K Bulb 1

L Metal Bowl 1

M Mounting Bracket Scew (preassembled to Mounting Bracket [A]) 4

N Switch Housing Screw (preassembled to Light Pan [F]) 3

O Light Pan Screw (preassembled to Fitter Plate [D]) 4

P Locking Ring Screw (preassembled to Bowl Housing [H] 3

Q Remote Pack 1

R Blade Balancing Kit 1

M N O P Q R

HARDWARE CONTENTS (shown actual size)

Wire Connector

Qty. 3

+ 1 extra

Blade Screw

Qty. 9

+ 1 extra

Blade Washer

Qty. 9

+ 1 extra

AA BB CC

SAFETY INFORMATION

Please read and understand this entire manual before attempting to assemble, operate or install the

product.

• Before you begin installing the fan, disconnect the power by removing fuses or turning off the circuit

breakers.

• Make sure all electrical connections comply with local codes, ordinances, the National Electrical

CodeandANSI/NFPA70-199.Hireaqualiedelectricianorconsultado-it-yourselfwiring

handbook if you are unfamiliar with installing electrical wiring.

• Make sure the installation site you choose allows a minimum clearance of 7 ft. from the blades to

theoorandatleast30in.fromtheendofthebladestoanyobstruction.

• The net weight of this fan is: 17.64 lbs.

DANGER: When using an existing outlet box, make sure the outlet box is securely attached to

the building structure and can support the full weight of the fan. Failure to do this can result in serious

injury or death. The stability of the outlet box is essential in minimizing wobble and noise in the fan

after installation is complete.

WARNING: To avoid personal injury, the use of gloves may be necessary while handling fan

parts with sharp edges.

WARNING: Using a full-range dimmer switch to control fan speed will cause a loud humming

noisefromthefan.Toreducetheriskofreorelectricshock,doNOTuseafull-rangedimmerswitch

to control the fan speed.

WARNING: Toreducetheriskofre,electricshockorpersonalinjury,mountthefantoan

outlet box marked “ACCEPTABLE FOR FAN SUPPORT” and use the mounting screws provided with

theoutletbox.Mostoutletboxescommonlyusedforthesupportoflightingxturesarenotacceptable

forfansupportandmayneedtobereplaced.Consultaqualiedelectricianifindoubt.Securethe

outlet box directly to the building structure. The outlet box and its support must be able to support the

moving weight of the fan (at least 35 lbs.).

WARNING: Toreducetheriskofre,electricalshockorpersonalinjury,wireconnectors

provided with this fan are designed to accept only one 12-gauge house wire and two lead wires from

the fan. If your house wire is larger than 12-gauge and there is more than one house wire to connect

to the two fan lead wires, consult an electrician for the proper size wire connectors to use.

WARNING: Toreducetheriskofre,electricshockorpersonalinjury,donotbendtheblade

arms when installing them, balancing the blades or cleaning the fan. Do not insert objects between

the rotating fan blades.

WARNING: To reduce the risk of personal injury, use only parts provided with this fan. The use

of parts OTHER than those provided with this fan will void the warranty.

SAFETY INFORMATION

CAUTION: Be sure the outlet box is properly grounded or that a ground (green or bare) wire is present.

CAUTION: Carefully check all screws, bolts and nuts on the fan motor assembly to ensure they are

secured.

CAUTION: This device complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions: (1) this device may not cause interference, and (2) this device must accept any

interference received, including intererence that may cause undesired operation of the device.

PREPARATION

Before beginning the assembly of this product, ensure that all parts are present. Compare all parts

with the package contents list and hardware contents list. If any part is missing or damaged, do not

attempt to assemble the product.

Estimated Assembly Time: 120 minutes

Tools Required for Assembly (not included): Electrical Tape, Phillips Screwdriver, Pliers, Safety

Glasses, Step Ladder, Wire Cutters and Wire Strippers

Helpful Tools (not included): AC Tester Light, Tape Measure and Wiring Handbook

INITIAL INSTALLATION

1. Turn off the circuit breakers and the wall switch to the

fan supply line leads.

DANGER: Failure to disconnect the power

supply prior to installation may result in serious injury

or death.

2. This fan is intended for Flushmount Installation.

Standard Mounting, Angle Mounting, and Closemount

installations are not available.

3. Ensure the blades (J) will be at least 30 in. from any

obstructionsandwillbeatleast7ft.abovetheoor. 3

Standard Mounting

Flushmount Closemount

Angle Mounting

7 ft. Min

30 in. Min

INITIAL INSTALLATION

4. Loosen the four light pan screws (O) preassembled

tothetterplate(D).Then,turntheorangeshipping

block counterclockwise and remove. Discard the

shipping block.

5. Feed the supply wires from the outlet box through

the center hole in the mounting bracket (A). Then,

secure the mounting bracket (A) to the outlet box (not

included) using screws and washers provided with the

outlet box.

CAUTION: It is very important you use the proper

hardware when installing the mounting bracket (A) as it

will support the fan.

6. Raise the fan and place the canopy (B) on the hook

on the mounting bracket (A), temporarily leaving

hands free for the wiring process.

Outlet Box

Shipping Block

WIRING

WARNING:Toreducetheriskofre,electricalshockorpersonalinjury,wireconnectors

provided with this fan are designed to accept only one 12-gauge house wire and two lead wires

from the fan. If your house wire is larger than 12-gauge and/or there is more than one house wire to

connect to the two fan lead wires, consult an electrician for the proper size wire connectors to use.

CAUTION: Be sure the outlet box is properly grounded or that a ground (green or bare) wire is present.

1. Connect supply and fan wires according to the

diagram and these steps:

•ConnecttheGreenwirefromthemountingbracket

(A) to the Bare/Green (ground) supply wire.

•ConnecttheWhitewirefromthefantotheWhite

(neutral) supply wire.

•ConnecttheBlackwirefromthefantotheBlack

(hot) supply wire.

Secure all wiring connections together with wire

connectors (AA).

Note: The Black wire is hot power for the fan. The

White wire is neautral for the fan and light kit. The

Green wire is the ground wire. If supply wires are

different colors than referred to above, a professional

electrician should determine the proper wiring.

Hardware Used

AA Wire Connector x 3

White (neutral)

Black

Black (hot)

White

2. Wrap electrical tape (not included) around each

individual wire connector (AA) down to the wire.

3. Turn the spliced/taped wires upward and gently push

the wires and wire connectors (AA) into the outlet box.

WARNING: Ensure no wire strands are visible

after making connections. Place the Green and White

wire connections on the opposite side of the outlet

box from the Black.

Bare/Green

(Ground)

FINAL INSTALLATION

1. Loosen all four mounting bracket screws (M), then

completely remove two mounting bracket screws (M)

from opposite sides of the mounting bracket (A).

Slide the canopy (B) over the mounting bracket (A),

aligning the slotted holes in the canopy (B) with the

pre-loosened mounting bracket screws (M) in the

mounting bracket (A). Twist the canopy (B) clockwise

to lock. Then re-insert the mounting bracket screws (M)

and securely tighten all screws.

2. Insert blade (J) through slot in the side of the motor

assembly (C), ensuring the “THIS SIDE UP” label faces

the ceiling. Align the holes of one blade (J) with three

blade screw holes in underside of the motor assembly

(C). Secure blade (J) with three blade screws (BB) and

blade washers (CC).

Repeat for the remaining blades (J).

Hardware Used

BB Blade Screw x 9

CC Blade Washer x 9

3. Removeoneofthelightpanscrews(O)fromthetter

plate (D). Then, insert the wires from the center of the

tterplate(D)throughtheholeinthelightpan(F).Align

the light pan (F) over the previously loosened light pan

screws (O), then place the keyholes of the light pan (F)

clockwise. Secure the light pan (F) with the previously

removed light pan screw (O). Tighten all four light pan

screws (O).

Table des matières

Autres manuels Harbor Breeze Ventilateur

Harbor Breeze

Harbor Breeze Bath Ventilator with Light Manuel utilisateur

Harbor Breeze

Harbor Breeze 40016 Manuel utilisateur

Harbor Breeze

Harbor Breeze SARATOGA 00798 Manuel utilisateur

Harbor Breeze

Harbor Breeze TILGHMAN WCK52LMW5N Manuel utilisateur

Harbor Breeze

Harbor Breeze 35063 Manuel utilisateur

Harbor Breeze

Harbor Breeze MERRIMACK 40942 Manuel

Harbor Breeze

Harbor Breeze EXOCET 40764 Manuel utilisateur

Harbor Breeze

Harbor Breeze Teolo Manuel utilisateur

Harbor Breeze

Harbor Breeze Cape Coast E-YLM52WW5C1 Manuel utilisateur

Harbor Breeze

Harbor Breeze SOUTH RIVER C-ST52BNK5D1 Manuel utilisateur

Harbor Breeze

Harbor Breeze LAKE PLACIDO CPK1261 Manuel utilisateur

Harbor Breeze

Harbor Breeze BEACH CREEK TG44LW3D1RC Manuel utilisateur

Harbor Breeze

Harbor Breeze MAZON MZ44BNK3LR Manuel utilisateur

Harbor Breeze

Harbor Breeze WAVEPORT STYLE E-WK52NWZ5C1 Manuel utilisateur

Harbor Breeze

Harbor Breeze LP8221LCH Manuel utilisateur

Harbor Breeze

Harbor Breeze TG44BNK3D1RC Manuel utilisateur

Harbor Breeze

Harbor Breeze Crosswinds II 40821 Manuel utilisateur

Harbor Breeze

Harbor Breeze Bath Ventilator with Light Manuel utilisateur

Harbor Breeze

Harbor Breeze E-BDB52LABZ5BC4N Manuel utilisateur

Harbor Breeze

Harbor Breeze RLG52NWZ5L Manuel utilisateur

Harbor Breeze

Harbor Breeze BUILDER'S SERIES 40698 Manuel utilisateur

Harbor Breeze

Harbor Breeze EUK60MBK10LR Manuel utilisateur

Harbor Breeze

Harbor Breeze 40360 Manuel utilisateur

Harbor Breeze

Harbor Breeze CALERA CLRO52-II Manuel utilisateur

Manuels Ventilateur populaires d'autres marques

ELTA FANS

ELTA FANS H03VV-F Manuel utilisateur

Hunter

Hunter 20714 Manuel d'instructions

Emerson

Emerson CARRERA VERANDA CF542ORB00 Manuel utilisateur

Hunter

Hunter Caraway Manuel d'instructions

Panasonic

Panasonic FV-15NLFS1 Manuel utilisateur

Kompernass

Kompernass KH 1150 Manuel utilisateur

VES

VES FALA100/12V/TR Manuel utilisateur

Vertiv

Vertiv Liebert DCD Manuel utilisateur

Westinghouse

Westinghouse GFP Series Manuel utilisateur

Venmar

Venmar KUBIX HRV PLUS Series Manuel utilisateur

Maico

Maico ECR 31 Manuel utilisateur

Sonnenkonig

Sonnenkonig Dinky Manuel utilisateur

S&P

S&P ECOWATT HXBR Manuel utilisateur

Wider

Wider IMP03369BH Manuel utilisateur

Panasonic

Panasonic F-60DHN Manuel utilisateur

Hinkley

Hinkley HIGHLAND Manuel utilisateur

Broan

Broan 766BN Manuel utilisateur

Premium

Premium PFS16022 Instructions de montage