1. When battery goes low, the “Low Battery” indicator will be turned on automatically. It is the
time to charge the battery with AC power.
2. Before starting using ACS, please check if the bubble is in the middle of the level; if not,
please make appropriate adjustment.
3. Allow ACS to warm-up for 10 minutes after switching on the power, for battery results.
4. Zero the scale: When there is no item on t he scale but reading is not zero, press the zero key
to turn on zero indicator.
5. Weighing: Ensure that scale is in ZERO position and ZERO indicator is glowing; place an item
for weighing on the pan. The weight window will show the weight of the item.
6. Tare: Put container on the platter, once the weight reading is stable, press the TARE key, the
TARE indicator will be on and the container’s weight will be deducted. When it is time to
clear the TARE, take off the container and press TARE key again.
7. Overload Warning: Please do not add item that is over the maximum capacity. When the
scale is ringing an alarm, remove the item on platter to avoid damage to the load cell.
8. Unit Price Setting: To trade with your ACS scale, it is necessary to setting a unit price of goods.
EPS-1 PR then use this unit price to determine how much value of that goods placed on
platter.
When ACS scale displaying the weight of the goods placed on scale, set the unit price through
numeric keys. Set unit price is showed in UNIT PRICE window display, TOTAL PRICE window
display shows the total price of goods. To cancel the previous unit price, press C key.
Accumulator operation
1. Prepare to accumulate: Each time before accumulate, please make sure the platter is empty,
the current accumulator for values is reset to zero, and the weight reading is stable.
2. Accumulation Operation: Put the weighing item on platter, wait for the weight reading to be
stable, press the ADD key, the window will show ADD n being the number of times a count
operation had been performed.
If you have entered the Unit Price for that item; the accumulate operation will show the total
of both – weight as well as price as follows:
Place an item on platter, allow the scale reading to be stable; enter unit price using numeric
keys, unit price window will show the unit price and total price window will show total price.
Now press ADD key, it will store the value of weight and price both. Now, remove the first
item from the platter, put another item on the scale; allow it to be stable, enter unit price
with numeric keys, after observing unit price and total price, press Add key again, the unit
price window will flash Add 2 and weight window as well as total price window will show
accumulated weight and accumulated price respectively.
You can carry on this way for 99 items with your ACS scale.
3. Accumulate Clear: You can clear the accumulated value by pressing C (clear) key at any time.
Unit Price Storage
ACS scale can store 8 sets unit price.
1. Store the unit price: Press STORE key, then enter desired unit price using numeric keys. Now
