Hanwha Techwin WRR-5301 Manuel utilisateur

Hanwha - WRR-5301/5501 - Field Replacement

Unit - Add-in Cards

This document will demonstrate how to replace and install Heatsink Fan for the WRR units.

Step 1 - Prepare for Hard Drive Replacement

Before removing the lid and performing any work inside the chassis,

please ensure:

●You have powered down the unit via the Windows interface;

●The power cable has been removed from the unit;

●You are properly grounded. Simple ways to ground yourself are:

●Wearing an ESD strap.

●Making contact with a grounded portion of the chassis.

Step 2 - Contents of FRU Replacement Kit

●The kit will contain:

●(1) Replacement RAID Card and/or

●(1) Replacement Battery Back Up Unit

●(1) FRU Guide PDF

Step 3 - Remove the Lid

●Unlock the lid to remove it.

● Use a small athead or Phillips screwdriver.

●Turn the lock counter clock-wise to unlock.

●The lid is in the unlocked position when the long slot is pointing at the open padlock engraving.

●Press the blue button in, and lift up to release the lid.

●The lid will slide away from the chassis and can be removed.

Step 4 - RAID and BBU Add-in Removal and Installation

●Remove the screw(s) holding the card(s) in place.

●Do not misplace the screw(s).

●Disconnect the mini-SAS cable from the RAID card.

●If the RAID card is being replaced:

●Disconnect the RAID card from the BBU.

●If the BBU is being replaced:

●Disconnect the BBU from the RAID card.

●It will be necessary to clip the zip-ties holding the cables to the BBU PCB.

Step 5 - RAID and BBU Add-in Removal and Installation 2

●Replace the connected cards back the the slots they were removed from.

●RAID Card

●BBU Adapter Card

●The BBU card will not be inserted into a motherboard slot, it will just be residing next to the

RAID card.

●Secure the cards to the chassis using the screws removed earlier.

Step 6 - Replace the Lid

●Once placed correctly on the chassis, the lid will slide into place.

●Press the latch down to lock the lid in place.

● Using a small at head or Phillips screwdriver, turn clock-wise to lock the latch.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Hanwha Techwin DVR

Hanwha Techwin

Hanwha Techwin wisenet SRD-476D Guide d'installation

Hanwha Techwin

Hanwha Techwin WRN-810S Manuel utilisateur

Hanwha Techwin

Hanwha Techwin WRR-5301 Manuel utilisateur

Hanwha Techwin

Hanwha Techwin WISENET TRM-810S-1TB Manuel utilisateur

Hanwha Techwin

Hanwha Techwin Wisenet HRD-442 Guide d'installation

Hanwha Techwin

Hanwha Techwin Wisenet TRM-1610M Guide d'installation

Hanwha Techwin

Hanwha Techwin Wisenet Series Manuel utilisateur

Hanwha Techwin

Hanwha Techwin Wisenet HRX-1634 Instructions d'installation

Manuels DVR populaires d'autres marques

FLIR

FLIR M3100E Series Manuel utilisateur

VTRACKPRO

VTRACKPRO FPRO300 Manuel utilisateur

Swann

Swann NVR-7085 models Manuel utilisateur

XtendLan

XtendLan DVR-1670C Manuel utilisateur

urmet domus

urmet domus 1093/004AHD Manuel utilisateur

Holux

Holux M1 Manuel utilisateur

CMOS DOTCOM

CMOS DOTCOM ANX-1670 Manuel utilisateur

Whistler

Whistler D16VRS Manuel utilisateur

Defender Security

Defender Security 82-20235 Manuel utilisateur

MISUMI

MISUMI MP-WF100M Manuel utilisateur

Speco

Speco D8HU Manuel utilisateur

UST

UST DDR-E04AA Instructions d'utilisation

Consolidated

Consolidated Digital Video Recorder Manuel utilisateur

Mace

Mace DVR0404RW Guide de démarrage rapide

RCA

RCA RTD315W Manuel utilisateur

FSM

FSM Colibri Grande PRO Manuel utilisateur

Hauppauge

Hauppauge HD PVR 2 Manuel utilisateur

Identivision

Identivision ICR-PH161i PIONEER Manuel utilisateur